Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Electrification Of Household In Pe/Ue Habitations At Agra-1, Agra-2, Aligarh & Kanpur Zone Under Dvvnl,( District Agra,Mainpuri, Firozabad, Mathura,Aligarh, Hathras, Etah , Kasganj,Auriya ,Etawah, Kannauj , Farrukhabad, Kanpur Deha & Kanpur Nagar ) Of Utt. Submission Date for this Tender is 11-09-2023. Bolts Tenders in agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 19-Aug-2023 | Corrigendumd | Date | 29-08-2023 |
2 | 30-Aug-2023 | Date_Extend | Date | 11-09-2023 |
Sl. No. | Item Description |
1 | SUPPLY OF ITEMS |
2 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
3 | Stone Pad (300x300x75mm) |
4 | Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm |
5 | Aerial Bunched XLPE Cable 1X25 (Ph) + 1X16 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm |
6 | LT XLPE cable 4x16 Sq mm |
7 | 1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes. |
8 | ACSR Weasel Conductor |
9 | ACSR Rabbit Conductor -Jumpering Works |
10 | Aluminium binding wire - 6 SWG |
11 | 11KV Fuse Set (Drop out) |
12 | 11KV TPMO |
13 | 25 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type) |
14 | LT Distribution Box withMCCB and AMI metering (Smart Meter compitable with System) equipmen . (SMC Type) for 25KVA (DRG- no. REC/RDSS/DTR/SS/24) |
15 | 9 KV LA , 5 KA (Distribution Class) |
16 | Earthing Coil connected with nutbolt using Bentonite Powder |
17 | GI Flat 25X3 for Earthing |
18 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
19 | G.I. Barbed Wire |
20 | G.I. Wire No. 16 SWG for binding |
21 | G.I. Wire 6 SWG |
22 | G.I. Wire 8 SWG |
23 | 11 KV Disc Fitting T & C type |
24 | 11 KV Polymer Disc Insulators45 KNT&C Type |
25 | 11 KV Pin Insulator Polymer Type as per TS |
26 | Dead End clamp (Insulated) |
27 | End Cap for AB cable |
28 | Suspension clamps (Insulated) |
29 | Pole Clamps with with I-Hook & nut & bolts for laying ABC |
30 | Insulating Piercing Connector (16-95 sq.mm) |
31 | Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts |
32 | Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts |
33 | PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral) |
34 | PG Clamp for Rabbit |
35 | GI Stay Wire 7/10 SWG |
36 | HT Guy Insulator |
37 | LT Guy Insulator |
38 | Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09 |
39 | HT Stay Clamp as per approved drawing-11 KV |
40 | LT Stay Clamp as per approved drawing |
41 | Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DT"s Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work. |
42 | GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work. |
43 | Eye Bolt |
44 | Jointing sleave -ACSR Weasel |
45 | 11 KV Danger Board |
46 | 11 KV Number Plate |
47 | Sign Board as per TS and Approved Drawing |
48 | ERECTION PART |
49 | Survey , Erection, Testingand commissioning of 11 Kv Line(Complete Work in all respect) |
50 | Route survey and pole spotting for 11 KV line |
51 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
52 | ACSR Weasel Conductor |
53 | Stone Pad (300x300x75mm) |
54 | Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DT"s Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work. |
55 | GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work. |
56 | G.I. Wire 6 SWG |
57 | G.I. Wire 8 SWG |
58 | Eye Bolt |
59 | G.I. Wire No. 16 SWG for binding |
60 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
61 | 11 KV Pin Insulator Polymer Type as per TS |
62 | 11 KV Polymer Disc Insulators45 KNT&C Type |
63 | 11 KV Disc Fitting T & C type |
64 | PG Clamp for Rabbit |
65 | Aluminium binding wire - 6 SWG |
66 | Jointing sleave -ACSR Weasel |
67 | 11 KV Danger Board |
68 | G.I. Barbed Wire |
69 | Earthing Coil connected with nutbolt using Bentonite Powder |
70 | Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09 |
71 | HT Guy Insulator |
72 | GI Stay Wire 7/10 SWG |
73 | HT Stay Clamp as per approved drawing-11 KV |
74 | 11 KV Number Plate |
75 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
76 | Erection, Testingand commissioningof 11/0.433 KV three phase Transformer sub-station -25 KVA(Complete Work in all respect) |
77 | 25 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type) |
78 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
79 | Stone Pad (300x300x75mm) |
80 | Pre-fabricated galvanised steel items (zinc 610gms/sqm), like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings,Tea off, guarding channels, back clamp, DT"s Structure etc made of GS Channels , GS angle , GS flats (50x8mm) of given sizes for over head structures as per technical specification, approved drawings and scope of work. |
81 | GS Nuts, bolts and washers as per technical specification, approved drawings and scope of work. |
82 | 11 KV Polymer Disc Insulators45 KNT&C Type |
83 | 11 KV Disc Fitting T & C type |
84 | 11 KV Pin Insulator Polymer Type as per TS |
85 | 11KV TPMO |
86 | 11KV Fuse Set (Drop out) |
87 | 9 KV LA , 5 KA (Distribution Class) |
88 | LT Distribution Box withMCCB and AMI metering (Smart Meter compitable with System) equipmen . (SMC Type) for 25KVA (DRG- no. REC/RDSS/DTR/SS/24) |
89 | LT XLPE cable 4x16 Sq mm |
90 | G.I. Barbed Wire |
91 | ACSR Rabbit Conductor -Jumpering Works |
92 | Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09 |
93 | HT Guy Insulator |
94 | GI Stay Wire 7/10 SWG |
95 | HT Stay Clamp as per approved drawing-11 KV |
96 | Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc. |
97 | GI Flat 25X3 for Earthing |
98 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
99 | Erection, Testingand commissioning of New LT Line With AB Cable(Complete Work in all respect) |
100 | 8.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification |
101 | Stone Pad (300x300x75mm) |
102 | Aerial Bunched XLPE Cable 1X25 (Ph) + 1X16 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm |
103 | Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm |
104 | Pole Clamps with with I-Hook for laying ABC |
105 | Dead End clamp (Insulated) |
106 | Suspension clamps (Insulated) |
107 | End Cap for AB cable |
108 | PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral) |
109 | Insulating Piercing Connector (16-95 sq.mm) |
110 | 1x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes. |
111 | Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts |
112 | Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts |
113 | Earthing Coil connected with nutbolt using Bentonite Powder |
114 | Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09 |
115 | LT Guy Insulator |
116 | GI Stay Wire 7/10 SWG |
117 | LT Stay Clamp as per approved drawing |
118 | Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing |
119 | Installation of Sign Board with as per TS and Approved Drawing |
120 | Sign Board as per TS and Approved Drawing |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail