Kerala State Electricity Board-KSEB has published Constructing 11 Kv Line Using Ht Covered Conductor At Tubewell For Avoiding Cross Country Ht Line, Mynagappally Under Esd Sasthamcottaon Turnkey Basis. Submission Date for this Tender is 01-08-2023. Conductor Tenders in mynagappally Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | MATERIALS |
| 2 | Covered Conductor HT 70 Sq.mm |
| 3 | COMPOSITE PIN INSULATOR 11 kV with Pin |
| 4 | Insulater tie for covered conductor |
| 5 | Disc Insulator 11 Kv Composite polymeric-covered conductor |
| 6 | Hard ware Fittings-GI-for HT Covered Conductor 120sq.mm |
| 7 | Midspan joint set for covered conductor HT |
| 8 | Single core outdoor termination kit for covered conductor |
| 9 | Insulation piercing connector set for covered conductor HT |
| 10 | Helically Formed Fitting -Distribution Top Tie for ACSR Raccoon |
| 11 | Lightning Arrester 9 kV,10 KA (Distribution class) Composite Polymer Housing |
| 12 | LABOUR |
| 13 | Loading HT Atype pole from the stacking place and unloading the same at work site ( Transport by vehicle ) |
| 14 | Transporting Pole by hired vehicle to a distance up to 5 km and carring up to 4 polesExcludingloading and un loading |
| 15 | Fitting and erecting 1 HT PSC pole in position including fitting cross arm ,Digging and back filling pit,Drawing earth leads |
| 16 | Fitting and erecting A typepole in position including fitting cross arm ,Digging and back filling pit,Drawing earth leads |
| 17 | Fitting and erecting HT DP using PSC poles including fitting two channel cross arm ,Digging and back filling pit drawing earth leads |
| 18 | Fitting and providing 1 HT Stay for PSC Pole including Digging and back filling pit |
| 19 | Providing one Earth using earth pipe incl. Digging separate pit at standard distance away from the pole/structure & backfilling. |
| 20 | Providing one coil Earth using GI Wireincl. Digging separate pit at standard distance away from the pole/structure & backfilling. |
| 21 | Fitting One Set of AB Switch and giving connections |
| 22 | Fitting One addition V-Cross arm in existing single poles including conveyance of materials |
| 23 | Fitting One One addition75x40 mm ,1.8 channel cross armin existing single poles including conveyance of materials |
| 24 | Fitting One One addition 100x50x60 mm ,2.4 channel cross armin existing 11 KV DPincluding conveyance of materials |
| 25 | Dismantling without damage one HT PSC/RCC Poles after disconnecting stays, struts and stacking the same |
| 26 | Transferring LT Single phase 2/3 wire OH Line to newely erected HT/LT Poles and refitting all items to the new poles |
| 27 | Transferring LT Three phase 4/5 wire OH Line to newely erected HT/LT Poles and refitting all items to the new poles |
| 28 | Dismantling and reconnecting Single phase servise connections from OH Line including lowering down the WP Portion |
| 29 | Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting. |
| 30 | Cutting trees beyond 30cm but upto and incl. 60cm girth, cutting branches, removing root completely and stacking (where space for falling trees is not enough). |
| 31 | Fitting and providing HT Strut using HT PSC pole incuding digging and back filling pit |
| 32 | Stringing1 KM Three phase 11 kv Line with XLPE Insulated ACSR Raccoon |
| 33 | Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation. |
| 34 | Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading |
| 35 | Fitting 6 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses. |
| 36 | Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads |
| 37 | Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same. |
| 38 | Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls. |
| 39 | Dismantling (without damage) one km LT additional conductor line, cross arms, insulators and stacking the conductors in rolls. |
| 40 | Dismantling one damaged LT PSC/RCC Strut pole incl. removal of clamps and stacking. |
| 41 | Providing Stay for LT poles incl. digging & back filling pit. |
| 42 | Stringing one km LT 3ph 5 wire line (Rabbit for Ph and Weasel for N&St.main) incl. fitting cross arm etc. removing touchings and conveyance of materials. |
| 43 | Fitting one additional Fuse unit and giving connection from Transformer to fuse and DB to LT OH line. |
| 44 | Drilling hole of various sizes on existing Channel/Cross Arm. |
| 45 | Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking. |
| 46 | Dismantling one Transformer upto 160kVA from structure and loading to vehicle incl. disconnecting HT/LT/Earth connections. |
| 47 | Additional rae for providing one Disc set on any type of HT Pole for making cut point |
| 48 | Fitting one set ( 3 nos) of 11KV LA and giving connections excluding earthing |
| 49 | Installation of Insulation piercing connector for main to service line main :16-95sqmm, Tap : 16-95 sqmm |
| 50 | Doing straight joint on cables of sizes up to and including 3x 185 sq.mm using the cable joining kit supplied departmently as per specification |
| 51 | Doing one cable end termination on cable of sizes up to and including 3x185 sq.mm using the cable joining kit supplied departmently |
| 52 | Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
