Bids Are Invited For Indoor Gym Equipments ( Q3 ) , Outdoor Gym Equipments ---1 Providing Designing And Fixing Of Air-Walker Of Size 100 X 550 X 1480Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized And Powder Coated 80-120 Micron Thick Using Akzo Nobel Or Equivalent In Desired Shade And Colour. All Welding Joints Of Pipe Shall Be Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Wilding Points Prior To Finishing. Base Plate Cover Shall Be Made Up Of Virgin Lldpe Plastic By Rotational Moulding With Minimum 4.00Mm Thickness Uv Resistant And Colour As Approved By Engineer-In Charge. High Quality Grip Rubber Should Be Used On Handles. Foothold Shall Be Made Of Nylon Alloy With Rounded Edge To Prevent Impact And Injury. Maintenance Free Bearing Should Be Used In Equipment Manufactured By Reputed Company Duly Sealed And Self Lubricated To Be Approved By Engineer In Charge. Equipment To Be Fitted With Inbuilt Limiters. The Equipment Should Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Boits And When Concrete Is Set, Fixing The Equipment On To It And Cover Nuts And Bolts With Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In- Charge Regarding Material, Shape Of Equipment, Colour ( Of Metal, Seat And Pedal ) , And Fixing Of Equipment Etc.- According N.S. Item. 2 2. Providing, Designing And Fixing Of Stair Stepper In A Combination Of Pair And A Single Step Of Size 2000 X 550 X 1600 Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Deges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber At Top End. Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Scaled And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Ms / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Welded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal Seat And Base Cover Plate And Fixing Of Equipment Etc.- According N.S. Item. 3 Providing, Designing And Fixing Of Pull Chair Of Size 2500 X 800 X2000 Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick And Other Pipes Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber At Top End. Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Mainmum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Self Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Ms / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 And J Shaped Wilded Bolts And Once The Concrete Is Set Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc.- According N.S. Item. 4 Providing, Designing And Fixing Seated Chest Press Of Pull Pair Of Size 1800 X 700 X 2000Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Edges And Burrs. Zinc Primer Paints To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber. Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Slef Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Ms / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 J Shaped Wilded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc.- According N.S. Item. 5 Providing, Designing And Fixing Arm Wheel In A Pair Of Size 850 X 800 X 1800Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick And Other Pipe Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Deges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Slef Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Ms / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 J Shaped Wilded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc.- According N.S. Item. 6 Providing, Designing And Fixing Elliptical Exerciser Of Size 1200 X 540 X 1600Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick And Other Pipe Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Deges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Slef Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Ms / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 J Shaped Wilded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc.- According N.S. Item. 7 Providing, Designing And Fixing Double Cross Walker Of Size 1600 X 600 X 1600Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick And Other Pipe Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Deges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Slef Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Ms / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 J Shaped Wilded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc.- According N.S. Item. 8 Providing, Designing And Fixing Triple Twister Of Size 1700 X 1300 X 1300Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick And Other Pipe Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Deges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Slef Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Ms / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 J Shaped Wilded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc.- According N.S. Item. 9 Providing, Designing And Fixing Rowing Machine Of Size 1280 X 800 X 1500Mm Fabricated With Main Post Of 140Mm Dia And 3.00Mm Thick And Other Pipe Of 40Mm Dia 3.00Mm Thick All Pipes Made Up Of Hot Rolled Tubular Steel And Hot Dipped Galvanized, And Powder Coated Using Akzo Nobel Or Equivalent Of 80-120 Micron Thick. All Welding Joints Of Pipe Are Robotic Welded With Joints Scalloped As Necessary And Dressed Off Removing Sharp Deges And Burrs. Zinc Primer Paint To Be Applied At All Welding Points Prior To Finishing. Handle Bars Are To Be Provided With High Quality Grip Rubber Padals Shall Be Made Up Of Nylon Alloy With Rounded Edge Of Prevent Any Impact Of Injury And Seat To Be Made From Virgin Lldpe Manufactured By Rotational Moulding With Minimum Thickness Of Plastic 4.00Mm, Colourful And U V Resistant Environmental Friendly. Bearing Used Shall Be Maintenance Free, Duly Oiled Sealed And Slef Lubricated Made By Reputed Company To Be Approved By Engineer-In-Charge. Equipment To Be Fitted Within Built Limiters To Prevent Unwanted Movements. All Open Ends Of Pipe To Be Coloured By Ms / Lldpe Caps For User Safety. The Equipment To Be Fixed On Ground With Concrete Of Minimum Strength M25 J Shaped Wilded Bolts And Once The Concrete Is Set, Fix The Equipment On To It And Cover Nuts And Bolts With The Base Plate Cover, All Complete As Per Direction And Approval Of Engineer-In-Charge Regarding Material, Shape Of Equipment, Colour On Metal, Seat And Base Cover Plate And Fixing Of Equipment Etc.- According N.S. Item. ( Q3 ) Total Quantity : 15
