Tender For Repair Works In Rented Out Bsnl Staff Qtr Campus To Esic Dispensary-2 At Dharuhera (Hr) 2Nd Call 1 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. 600.00 Sqm One Square Metre 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a) 1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 0.50 Cum One Cubic Metre 3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (a) 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size derived fro natural resources) 0.50 Cum One Cubic Metre 4 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 10.00 Sqm One Square Metre (b) 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 2.00 Sqm One Square Metre 5 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 10.00 Sqm One Square Metre 6 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a) 250x16 mm 6.00 Nos. Each 7 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : (a) 250x10 mm 6.00 Nos. Each (b) 200x10 mm 6.00 Nos. Each 8 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a) 100 mm 12.00 Nos. Each 9 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. 0.35 Cum One Cubic Metre 10 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design (a) In 75x75 mm deep chase 3.00 Metre One Running Metre 11 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 1.00 No. Each 12 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. (a) With cement mortar 1:4 (1cement: 4 coarse sand). 15.00 Sqm One Square Metre 13 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 3.00 Sqm One Square Metre 14 Renewal of old putty of glass panes (length) . 30.00 m One Running Metre 15 Grading roof for water proofing treatment with (a) Cement mortar 1:4 (1cement : 4 coarse sand) 2.50 Cum Cum 16 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 50.00 Sqm 123.85 17 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification. (a) Two or more coats on new work. 10.00 Sqm One Square Metre 17 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (a) New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). 10.00 Sqm One Square Metre 18 Applying priming coat : (a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) 35.00 Sqm One Square Metre 19 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (a) Two or more coats on new work. 35.00 Sqm One Square Metre 20 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : (a) Old work (one or more coats) 135.00 Sqm One Square Metre 21 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : (a) 75 mm diameter pipes . 35.00 m One Metre (b) 100 mm diameter pipes . 40.00 m One Metre 22 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (a) One or more coats on old work. 90.00 Sqm One Square Metre 23 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 2000.0 0 Ltr One Litre 24 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 4.00 Nos. Each 25 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 0.50 Cum One Cubic Metre 26 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 6.00 Nos. Each 27 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. (a) 10 litre capacity - White 4.00 Nos. Each 28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (a) Semi rigid pipe (i) 32 mm dia 4.00 Nos. Each (ii) 40 mm dia 4.00 Nos. Each 29 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : (a) Rectangular shape 453x357 mm 4.00 Nos. Each 30 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same,all as per the direction of Engineer-in-charge 4.00 Nos Each 31 Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters 14.00 Sqm One Square Metre 32 Providing and fixing uplasticised PVC connection pipe with brass unions : (a) 45 cm length (i) 15 mm nominal bore 12.00 Nos. Each 33 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : (a) 100 mm diameter 4.00 Nos. Each 34 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: (a) 15 mm nominal bore. 4.00 Nos. Each 35 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (a) 15 mm nominal bore 4.00 Nos. Each 36 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : (a) 15mm nominal bore 5.00 Nos. Each 37 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality (a) L D - 2.5 (i) Rectangular shape 600x450 mm internal dimensions 3.00 No. Each 38 Repair of water supply accessories/fittings like C.P. brass pillar cocks, long body bib cocks, gate valve etc. by providing brass phase(spindle) if required , rubber washer, thread and white leads etc for proper functioning of the accessories complete as per the direction of Engineer-incharge.( Rate is exclusive of the cost of brass spindle whcih shall be paid for separatly) 20.00 Nos Each 39 Extra for providing bras spindle (heavy type) in bibcock, stopcock, pillarcock of approved shape /size as per site requiremement in item of repair of n bibcock, stopcock, pillarcock 14.00 Nos Each 40 Checking water supply system for proper supply of water from main outer pipeline to terrace tank and from terrace tank to user accessories complete as per the site requirement and the direction of Engineerin- charge. 5.00 Nos Each 41 Removing blockage from bath/kitchen WC traps including removal blockage from bends for its proper function to use i/c opening door of Tee and re-fixing the same after removal of leakage. Complete as per the direction of the Engineer –in-Charge.( Item including at the cost for provide T & P, ladder etc.) 16.00 Nos Each 42 Removing blockage of existing sewer line by desludging , making arrangement of rodding , pumping , cleaning the sludge and disposal of the same beyond the municipal limits in prescribed environment friendly manner by mechanical transport then cleaning the sewer line with fresh water complete as per the site condition & as per direction of Engineer-in-Charge including pre-monsoon precautionary measures. . 40.00 Metre One Metre 43 Cleaning of existing manholes by desludging & making arrangement of rodding , pumping & cleaning the sludge and disposal of the same beyond the municipal limits in prescribed environment friendly manner by mechanical transport then cleaning the walls & floors with fresh water complete as per the site condition & as per direction of Engineer-in-Charge .(Circular or rectangular manhole of any depth or size) 4.00 Nos Each 44 Cleaning of septic tank including soak pit by mechanical or manual means including removing waste mattter, sewage, sullage and removal of the same from the site to approve dumping ground upto 15 km lead and finally cleaning with fresh water all complete as per the direction of Engineer in charge.The contractor may visit the site i.e; O/o GMTD wherethe item is to be executed for site conditions, size of tank etc for quoting of his rates. 1 No Each 45 Welding at site i/c transportation of electric welding set for repairing of section windows, M.S. grills, steel chowkhats, hinges, steel jafferies and other steel members (Upto any floor level) ic welding, hammering, etc for the smooth operation of the fittings, welding of broken part by welding. (Rate includes cost of labour i.e one welder and beldar and electrodes , tranportation of the welding set and movement of welding set but excludes the cost of the steel members and fittings if required) all complete as per direction of Engineer-in-charge.Rate is for single day in one buiding compound 2.00 Job Each Job 46 Taking out old grown trees /plants at different location such as shafts balconies, roof etc upto floor five level including demolishing brickwork, cement concrete so as to remove the roots of the treee/plants all complete and repairing the same with old bricks with cement mortar 1:6 (1 cement : 6 coarse sand) and providing and laying new cement conctrete 1:2:4 (1 cement : 2 Coarse sand : 4 stone aggregate 20 mm nominal size) and finishing with cement plaster of mix 1:4 (1 cement : 4 coarse sand) as per site requirment and disposal of the building rubbish etc & like all complete as per the direction of the engineer in charge. (Note: the agency executing the work shall have to make his own arrangement of in scaffolding, jhulla etc and other T & P and labour required for the item) 1.00 Jobs Each Job 47 Providing and fixing C.P. brass waste of standard pattern for sink or wash basin complete as per the direction of Engineer-incharge:- a) 32 mm dia 4.00 Nos Each b) 40 mm dia 2.00 Nos Each 48 Providing and fixing pair of iron angle for holding wash basin including removing old rusted angles and fixing new angles in cement mortar etc. complete as per directions of Engineer-in-charge. 2.00 Pair Each Pair 49 Extra for providing powder coated MS butt hinges 100x58x1.90 mm in flush door shutters (if any hinges missed in chowkhat) 5.00 Nos Each 50 P/F PVC cover on PVC water storage tanks of capacity 500 litre to 2000 litre with necessary locking arrangements screw nuts etc complete as per direction of Engineer - in -charge. 4.00 Nos Each 51 Providing and fixing C.P. brass pillar cock 15mm nominal bore of approved quality conforming to IS specifications complete as per directions of Engineer-in-charge. 2.00 Nos Each 52 Providing and fixing stainless steel grating(Jali) with or without hole for waste pipe floor trap etc complete.:- (a) 100 mm diametre 12.00 Nos Each 53 Repairs to cement concrete flooring of thickness 40mm in patches of area 2.5 sq. metres and under including cutting & dismantling the patch in proper shape and preparing the sub grade and repairing with Cement concrete of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry all complete including disposal of rubbish to the dumping ground within 50 metres lead. 2.00 Sqm One Square Metre 54 Providing and fixing brass ball valve with of approved quality (screwed end) : b) 20 mm nominal bore. 2 Nos Each c) 25 mm nominal bore. 1 No Each 55 Taking out of unserviceable materials i/c dismantling fittings upto any floor height and stacking the same within 50 mtr. lead complete as per the direction of Engineerin- charge. a) Brass bib cock/stop cook / pillar cock / gate valves/angle valves/ball cock/ball valve/waste couplings and like items etc upto 40mm nominal bore 20.00 Nos Each 56 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti- termite treatment (including the cost of chemical emulsion) : a) Provision of anti termite treatment on the doors, windows cup boards etc in grounfloor 02 No and first floor 02 No quarters (i/c cost of the chemical) 1.00 Job One Job 57 Credit on account of unserviceable material received from dismantling, demolishing or lying at site issued to agency:- a) Brass bib cock/stop cook / pillar cock / gate valves/waste couplings/angle valve/ball valve etc and like scrap. 5.00 Kgs One kilogra m b) PVC water tank,cistern ,pvc connections etc and like scrap 5.00 Kgs One kilogra m e) Wooden Doors/windows of area 2.00 sqm or below 6.00 Nos Each Total
