Mishra Dhatu Nigam Limited has published Construction Of Control Room For Isothermal Hydraulic Forge Press Near 6000T Press At Forge Shop. Submission Date for this Tender is 28-07-2023. Building Work Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Supply & fixing Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 2 | Providing and fixing colour coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 3 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to all/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks). |
| 4 | Providing & Fixing of 2mm thick PVC flooring using full length sheets. Make: Poly floor mottled finish, including cost of adhesive of approved quality including surface preparation and neatly jointed finish complete. |
| 5 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster |
| 6 | Supply of (UPVC) Un-Plasticized Poly Vinyl Chloride Doors with single/ double shutters and door frame made of hallow extruded (UPVC ) Plasticize poly Vinyl Chloride Profiles with multi chambered Constructions, the nominal thickness of outer wall is 2.5mm duly reinforced with seasoned wood plank at the door hinges and the door frame shall be welded through fusion welding using UPVC reinforced profiles of 60 mm x 110 mm x 2.5 mm for casement shutter frames and the mullion sections are of 60 mm x 70 mm x 2.5 mm structurally reinforced with galvanized, hot dip galvanized fixed with ethylene propylene di-monomer (EPDM) weathering seal resistant to tear & decay and accessories for doors are Dr. Hahn hinges to adjust sash in 3 axes, handle with mazak alloy casting 1 No. per sash, ferco locking system and key made of mild steel zinc plated along with powder coated handles and mortise lock of standard make installation with anchor fasteners, Godrej door closure, silicon rubber sealant, easy glazing/ deglazing including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work for Swing Door or Pivot Door including cost of Glass panes and or water proof Particle board sheets of 12mm thk with both sides laminated: DOUBLE DOOR -(Elgi/Sintex/NCL/Fenesta etc). |
| 7 | Providing & fixing toughened glass 12 mm thickness with aluminiumbeading around glazing in partitions including cost of cutting to shape, fixing wastage at all heights & levels, drilling holes etc to complete; as per EIC. |
| 8 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides. |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 11 | Providing & Painting synthetic enamel paint with two or more coats on Steel structures including surface preparation. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
