Military Engineer Services-MES has published Tender For Special Repair To Bldg No-225 (Toilet Block) Of 2136 Fd Hosp At Karcham, Special Repair To Flooring And Sanitary Fitting In Or Bathroom Block (T-351) (Bathroom) At 426 (I) Fd Coy And Spl Repair To Bldg No T-127 In Old Depot Area Of 136 (I) Inf . Submission Date for this Tender is 04-08-2023. Building Work Tenders in karcham Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings, complete, all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete, all as specified and directed. |
| 4 | S&F0.63 mm thickgalvanized corrugatedmild steel sheeting with two corrugation side lapfixed with coach screws and washers, in roof walls etc with grade of zinc coating 275, complete, all as specified and directed. |
| 5 | Dismantling of wrought iron or mild steel work any description and fixed in any position, complete, all as specified and directed. |
| 6 | S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W , grade 250, quality Aincluding cleats,distance pieces etc, complete, all as specified and directed. |
| 7 | M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete, all as specified and directed. |
| 8 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets, complete, all as specified and directed. |
| 9 | Dismantling unframed timber scantlings 40 Sq. cm and over in section and in any position, complete, all as specified and directed. |
| 10 | Dismantling timber scantlings under 40 sq.cm in section, in any positions as in framed workbut in fillets, rails, posts, rafters, purlins, etccomplete all as specified and directed. |
| 11 | S&F hangers 6mm dia G.I. (upto 1200mm length ) adjusting level, size of grid 605mm X605mm, fixed to roof slabs mean of ceilling cleats made out of GI flat 40X3mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete, all as specified and directed. |
| 12 | S&F anodised aluminium snap grid frame work for suspended false ceiling ,size of grid 605mm X605mm, complete, all as specified and directed. |
| 13 | S&F Non asbestos fiber cement building board 6mm thick, fixed to aluminium or MS galvanised snap grid frame work with screw in ceiling ,complete, all as specified and directed. |
| 14 | S & F Second class hard wood plain fillets square, rectangular or triangular in section, clean sawn secured with screws, cross sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm, complete, all as specified and directed. |
| 15 | S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm, complete, all as specified and directed. |
| 16 | M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work inceiling etc, complete, all as specified and as directed. |
| 17 | M & L 4 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work inceiling etc, complete, all as specified and as directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises, complete, all as specified and directed. |
| 19 | M &L for 25 mm thick PCC (1:2:4) type B0 Using 12.5 mm well gradedstone aggregate as in sub base in floors, complete, all as specified and directed by Engr-in-charge |
| 20 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding exc. 0.06 sqm but n.exc. 0.11 sqm, in floors etc. Set over and including 15 mm thick screed bed in Cement Mortar (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed. |
| 21 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding exc. 0.11 sqm but n.exc. 0.18 sqm, in floors etc. Set over and including 15 mm thick screed bed in Cement Mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed. |
| 22 | M&Lcoloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar (1:4) on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite, complete, all as specified and directed. |
| 23 | Demolition of unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete, all as specified and directed. |
| 24 | M&L for 75 mm thick Plain cement concrete (1:4:8) type D-2 using 40 mm well graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair, complete all as specified and directed. |
| 25 | M&L Machine cut kota stone slab flooring 18-20mm thick laid over and including 20 mm thick cement screed bed in Cement Mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 26 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and includingScreed bed or bedding layer of cement mortar (1:4), 15 mm thick and jointed withgrey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete, all as specified and directed. |
| 27 | M&L for 75 mm thick, plain cement concrete (1:3:6), type C-1, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and fairwithout using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm. |
| 28 | Taking down door chowkhat with shutter area n.exc 1.5 Sqmeach(without taking off shutters from the frame) and remove to store, complete, all as specified and directed. |
| 29 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) and remove to store, complete, all as specified and directed. |
| 30 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing, complete, all as specified and directed. |
| 31 | S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC "C" channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing, complete, all as specified and directed. |
| 32 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section, complete, all as specified and directed |
| 33 | S&F 100mmlong Aluminiumbutt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized, complete, all as specified and directed. |
| 34 | S&F 150 mm long aluminium anodised handle fabricatedtype, complete, all as specified and as directed. |
| 35 | S & F aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified and directed. |
| 36 | S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete, all as specified and directed. |
| 37 | S&F for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete, all as specified and directed. |
| 38 | S&F Second class hardwoodfactory made 40 mm thick flushshutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping all around, complete, all as specified & directed. |
| 39 | S & F of 35 mm thick (Batten thickness) 2nd class hardwoodglazed/gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats, complete, all as specified and directed. |
| 40 | S&F factory madeSteel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete, all as specified and directed. |
| 41 | M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane, complete, all as specified and directed. |
| 42 | S & F Galvanised Mild steel wire cloth , 0.56 mm nominal dia of wireand average width of aperature 1.18 mm, complete, all as specified and directed. |
| 43 | S&F 300mm long aluminium anodisedsliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple, complete, all as specified and directed. |
| 44 | S & F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed. |
| 45 | Demolition of brick work, stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but including ashlar facings, dressed stonework and precast concrete articles, complete, all as specified and directed. |
| 46 | M &L for pre-cast cement concrete type C1 (1:3:6) using 20mm graded stone aggregate as in block masonry with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete, all as specified and directed. |
| 47 | M & LRendering 10mm thick on fair faces of concrete work in Cement Moratar (1:6) includingfinished even and smooth without using extra cement, complete, all as specified and directed. |
| 48 | M & LRendering 10mm thick on fair faces of concrete work in Cement Moratar (1:4) includingfinished even and smooth without using extra cement, complete, all as specified and directed. |
| 49 | M&L for Preparation of new wallsurface,andapplying three coat of White wash, complete, all as specififed and directed. |
| 50 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete, all as specified and directed. |
| 51 | M & L for providing pre-cast reinforced cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate and setting in cement mortar (1:4), complete, all as specified and directed. |
| 52 | M & L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed. |
| 53 | Dismantling PVC water tanks and removing from site capacity for exc 500 ltrs but n. exc 1000 ltrs, complete, all as specified and asdirected. |
| 54 | M&L for Rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 1000 litres capacity ‘triple layered’, hoisted and fixed in position including inlet, outlet and drain pipe with plug, 20 mm dia ,ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete, all as specified and directed. |
| 55 | Taking up or down 15mm boresteel tubing and connections including cleaning for refixing or removal to store, complete, all as specified and as directed. |
| 56 | Taking up or down 20mm boresteel tubing and connections including cleaning for refixing or removal to store, complete, all as specified and as directed. |
| 57 | S & F 15mm bore tubes "medium grade" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed. |
| 58 | S & F 20mm bore tubes "medium grade" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors, complete, all as specified and directed. |
| 59 | Supply and fix, VitreousChina wash down water closet EWC (pedestal pattern), white (including fixing bolts, flushing cistern and flush pipe), plastic seat and cover white,closed pattern with flat bottom, mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed as in repairs, and removal of old from site, complete, all as specified and directed. |
| 60 | Supply and fixing , in repair ,first quality , water closet (squatt pattern) including foot rest , vitreous china (white) ,first quality water closet, Orissa pattern size 580x440mm with integral foot rests, including 100mm cast iron "P" or "S" trap and 100mm cast iron sanitary connection socket to fit WC outlet, complete includingfixing of flush pipe with seat and making good the disturbed floor surfaces to match with existing and making connections serviceable, complete, all as specified and directed. |
| 61 | S & F PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete, all as specified and directed. |
| 62 | S & F in repair Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe), complete, all as specified and directed. |
| 63 | S&F in repairs , first quality , Wash basins, vitreous china, white, flat back of size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia HDPE waste pipe and including new brackets, complete, all as specified and directed. |
| 64 | S & F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,complete, all as specified and directed. |
| 65 | S & F in repairs stop valves, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete, all as specified and directed. |
| 66 | S&F in repairs 15 mm dia bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc, complete, all as specified and as directed. |
| 67 | S & F in repairs 15mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe, complete, all as specified and directed. |
| 68 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm, complete, all as specified and as directed. |
| 69 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 70 | S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats of weight minimum 190gm, complete, all as specified and as directed. |
| 71 | S & F in repairs 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete, all as specified and directed.. |
| 72 | S&F in repair 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall, complete, all as specified and directed |
| 73 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to wall, complete, all as specified and directed |
| 74 | S & F110 mm diabore PVC (SWR) bends any radius, complete, all as specified and directed. |
| 75 | S & F75 mm diabore PVC (SWR) bends any radius, complete, all as specified and directed. |
| 76 | S&F in repair soap dish, vitreous china white, approximate size 160 X 160 X 90mm, complete, all as specified and as directed. |
| 77 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete, all as specified and directed. |
| 78 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete, all as specified and directed. |
| 79 | M & L for preparation of surfaces of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting , on plastered surfaces, preparatory to distempering, complete, all as specified and directed. |
| 80 | M & L for Rendering 12mm thick in Cement Mortar (1:6) on brick work or concrete surfaces finishing even and smooth without using extra cement, complete, all as specified and directed. |
| 81 | M & L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:4) ,and finished even and smooth without using extra cement, complete, all as specified and directed. |
| 82 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete, all as specified and directed. |
| 83 | M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed. |
| 84 | M & L for RCC 1:2:4 type B-1 ( 20 mm well graded stone agg ) as in Beams , cantilevers, bressummers, lintels etc, complete, all as specified and directed |
| 85 | M&L for RCC 1:2:4 type B-1 using 20mm well graded stone aggregate as in Chajjas, complete, all as specified and directed. |
| 86 | M & L for Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified and directed. |
| 87 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete, complete, all as specified and directed. |
| 88 | M & L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges in rough finished flat surface of concrete complete all as specified and directed. |
| 89 | M&L for Rendering 5 mm thick on concrete surfaces of wall / vertical surfaces in cement mortar (1:3), and finish the surface even and smooth without using extra cement, complete, all as specified and as directed. |
| 90 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil, complete, all as specified and directed. |
| 91 | Demolition and breaking up drain pipes, 100mm150 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in ce/ment mortar, complete, all as specified and directed. |
| 92 | M & L for cement concrete 1:4:8 type D-2usng 40 mm well graded stone aggregate as in bed to drain pipes of 100 mm bore including packing under and haunching against the sides of pipeafter they are laid and tested complete all as specified and directed. |
| 93 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches, complete, all as specified and directed. |
| 94 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil, complete, all as specified and directed. |
| 95 | M&L for removing surplus excavated material (SOIL) to distance exc. 1.5 Km but not exc. 5.0 Km and depositing where directed at a level not exc. 1.50 m above the starting point, complete, all as specified and directed. |
| 96 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete, all as specified and directed. |
| 97 | M & L for point wiring using approved colour coding as per IS by using FRLS PVC insulated 1.5 Sqmm multistranded,1100 volt grade copper conductor cable unsheathed type, alongwith 1.5 Sqmm FRLS PVC insulatedstranded copper conductor cable for continous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceilingincluding provision ofsuitable gang box for fixing switches sockets etc. for one light point controlled by one switch, complete, all as specified and directed. |
| 98 | All as per item No 97.00 here-in-before but formultipin socket outlet, 5 Amps on the same board with other switches with cable of size 1.5 sqmm, complete, all as specified and directed. |
| 99 | All as per item No 97.00 here-in-before but for multipin socket outlet, 5 Amps ,independent with cable 1.5 Sqmm size, complete, all as specified and directed. |
| 100 | All as per item No 97.00 here-in-before but for one multipin socket outlet , 15 Amps,independent with copper cables of 2.5sqmm size, complete, all as specified and directed. |
| 101 | Supply and fix of switch piano, flush type single pole, one way, 5 Amps, 240 volts, complete, all as specified and directed |
| 102 | Supply and fix of socket outlet,multi pin 5 Amps, 240 volts ,complete, all as specified and directed. |
| 103 | Supply and fix ofswitch piano, flush type single pole, one way, 15 Amps, 240 volts, complete, all as specified and directed. |
| 104 | Supply and fix of socket outlet, multipin , 15 Amps, volts , complete, all as specified and directed. |
| 105 | Supply and fix of Ceiling Rose, 3 phase polycarbonate isolated body including junction round pvc cover plate with brass screw/nuts, complete, all as specified and directed. |
| 106 | Supply, laying LT UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq mm 2 core as per IS specifications laid through GI pipe, complete, all as specified and directed. |
| 107 | Supplying, laying, jointing and testing cable XLPE insulated IS 7098 (Part-I)-1988 marked, screened, PVC sheathed, armoured electric power cable (heavy duty) with aluminium conductor for working voltage upto and including 1100 volts, cross sectional area of cable 6sq mm 2 core laid in trenches/fixed on pole/wall/passed through pipe, complete, all as specified and directed. |
| 108 | Supply and laying of50mm dia.GI pipe "light grade" galvanizedwith all fittings laid in trenches for cable protection, complete, all as specified and directed. |
| 109 | M&L for dismantling of service wire 10 sqmm 2 core with all accessories incl service bracket, complete, all as specified and directed. |
| 110 | M&L in replacement of earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground(earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by alternate layers packed with charcoal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GImedium grade with funnel, wire mesh and 15mm dia GI protection pipe light grade all as shown in electrical plate no-3 of SSR part-I and connected toDBS. Earthing test point, and including testing on completion all as specified location and as directed by Engineer-in -charge. Note: Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured saparately. |
| 111 | S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete, all as specified and directed. |
| 112 | Supply and fixing, in replacement ofDistribution board ,double door , sheet metal enclosure,SPN 240 Volts , 08 wayswith 200 amps rated bus bar , with IP 43 protection,complete all as specified and directed. (Note ;- Taking down of DBs including taking down of MCBs also) |
| 113 | Supply and fixing, in replacement ofDistribution board , double door , sheet metal enclosure,SPN 240 Volts , 04 wayswith 200 amps rated bus bar,with IP 43 protection,complete all as specified and directed. |
| 114 | S&Fof MCBs, SPN 40 Amps , 10 KA 230 Volts ,50 HZ, complete, all as specified and as directed. |
| 115 | Supply and fixing MCBs, SPN , 32 Amps, 230V, complete, all as specified and directed. |
| 116 | S&Fof MCBs, SP6-32 Amps ,10 KA230 Volts ,50 HZ, complete, all as specified and as directed. |
| 117 | S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete, all as specified and directed.Make: Havells/Crompton/Wipro / Bajaj / Phillips |
| 118 | S&F in replacement ofLED lamp 9 Watt, complete, all as specified and directed.Make: Havells/Crompton/Wipro / Bajaj / Phillips |
| 119 | S&F in replacement of Lamp holder, PVC/Polycarbonate type with back plate, complete, all as specified and directed |
| 120 | S&F in replacement of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete, all as specified and directed. Make: Havells/Crompton/Wipro / Bajaj / Phillips |
| 121 | Note:- The total shall subject to adjustment of credit of Rs 46951.65 for old Materials as per Schedule of Credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
