Indian Oil Corporation Limited-IOCL has published Tender For Supply Of Standard Gaskets For Piping Flanges And Non Standard Gaskets For Heat Exchangers For Guwahati Refinery Revamp Of Cdu Nsf And Nsu Of Ms Indian Oil Corporation Limited (Iocl), India.. Submission Date for this Tender is 03-08-2023. Gaskets Tenders in guwahati Assam. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supply of “STANDARD GASKETS (FOR PIPING FLANGES) AND NON-STANDARD GASKETS (FOR HEAT EXCHANGERS)” inclusive of all Design, Engineering, Material selection, Manufacturing, Supply, Nameplate marking, Testing, Calibration, Mandatory spares, Tools, Accessories, Painting, Factory testing, Third party inspection and certification by IOCL approved TPI at vendor site as per the scope of supply as specified in the material requisition and other terms & conditions of bidding conditions |
2 | 1 1/2" NPS, SPIRAL WOUND GASKET, 150 #, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
3 | 1 1/2" NPS, SPIRAL WOUND GASKET, 300 #, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
4 | 2" NPS, SPIRAL WOUND GASKET, 150 #, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
5 | 3" NPS, SPIRAL WOUND GASKET, 150 #, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
6 | 4" NPS, SPIRAL WOUND GASKET, 150 #, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
7 | 4" NPS, SPIRAL WOUND GASKET, 300 #, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
8 | 6" NPS, SPIRAL WOUND GASKET, 150 #, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
9 | 24" NPS, SPIRAL WOUND GASKET, 150 #, B-16.20 /B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
10 | 10" NPS, SPIRAL WOUND GASKET, 150#, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
11 | 12" NPS, SPIRAL WOUND GASKET, 150#, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
12 | 14" NPS, SPIRAL WOUND GASKET, 150 #, B-16.20 /B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
13 | 18" NPS, SPIRAL WOUND GASKET, 150 #, B-16.20/B-16.5, 4.5 MM THK, Spiral SS316, Filler-Graphite, Inner ring-SS316, Outer ring - CS |
14 | SS-304, 4.5 THK, 150 NB, SCH-XS, 300#, GRAPHITE FILLED, SPIRAL WOUND, (S-11C) |
15 | SS-304, 4.5 THK, 200 NB, SCH-XS, 300#, GRAPHITE FILLED, SPIRAL WOUND, (S-11C) |
16 | SS-304, 4.5 THK, 40 NB, 300#, GRAPHITE FILLED, SPIRAL WOUND, (S-11C) |
17 | 4.5 THK, S.S.-304, GRAPHITE FILLED SPIRAL WOUND GASKETS WITH NON ASBESTOS FILLED C.S. GUIDE RING. (985-O/D, 959-I/D), (S-11C, Part No-121 ) |
18 | 4.5 THK, S.S.-304, GRAPHITE FILLED SPIRAL WOUND GASKETS WITH NON ASBESTOS FILLED C.S. GUIDE RING. (918-O/D, 892-I/D), (S-11C, Part No-122 ) |
19 | 4.5 THK, S.S.-304, GRAPHITE FILLED SPIRAL WOUND GASKETS WITH NON ASBESTOS FILLED C.S. GUIDE RING., (918-O/D, 892-I/D (10 R)), (S-11C, Part No-123 & 124 ) |
20 | 3.0 THK, S.S.J.A. REFER DRAWING FOR DETAILS, DRAWING NO-CE-1-2852; REV-3A, (840-O/D, 814-I/D (10 R),), (S-11C, Part No-125) |
21 | SHEET,GSKT,NON-ABS, 3MM Compressed non asbestos Fibre Metallic (SS wire reinforced) jointing manufactured from carbon fibre bonded with premium grade SBR & HNBR. Original Third party inspection (TPI) release note from 1OCL approved TPI agencies to be submitted along with supply. Scope of Inspection shall be asper attached Technical Data Sheet (Annexure 1). The gasket supplied must be of UKL-1000 3XA Metallic brand (Make: Uniklinger Limited). No other brand shall be acceptable. The Technical data sheet of UKL- 1000 3XA Metallic (Annexure 1) is attached with this tender for reference. The preferred dimension of supplied sheet shall be L = 2000 mm(approx.), B = 1500 mm(approx.) and thickness = 3mm. Vendor has to give a separate confirmation regarding supply of the same gasket of UKL-1000 3XA Metallic brand (Make: Uniklinger limited) while submission of their bid. Bidders to note that after placement of Purchase order (PO), there shall be no amendment possible in the technical conditions of the purchase order and no clarification shall be issued from IOCL GR. In case of any query or deviation, vendor to submit the same before opening of technical bid. IOCL GR shall thoroughly examine whether the deviation may be incorporated or not. IOCL GR reserves the right to accept or reject any deviation proposed by the vendor. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail