Military Engineer Services-MES has published Tender For Repairs To Joinery Roofing Leakage Seepage Flooring And Repairs To Md Accn Of Offrs And Pbor Accn And Periodical Services To Md Accn At Dhangu Mil Complex Under Ge South Pathankot. Submission Date for this Tender is 11-08-2023. Shed Construction Tenders in pathankot Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with3.0 Kg of cement per sqm. complete all as specified and directed. |
| 2 | M&L for 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement onfair faces of concreteroof surfaces , finished even and fair to receive treatment on roof, complete all as specified and directed. |
| 3 | Supply only water proofing compound, complete all as specified and directed. |
| 4 | Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermplynon woven polyester mat reinforcement of 160 gsm, weight of membrane@ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mmthe membrane shall befirst laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane all as specified and directed. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster) |
| 5 | Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris outside from defence landcomplete all as specified and directed . |
| 6 | M&LPCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in padding over roof slab complete all as specified and directed. |
| 7 | Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 8 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B" bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. |
| 9 | All as per description of item 08 above but except bricks complete all as specified and directed |
| 10 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wallsbuilt in cement mortar 1:4 complete all as specified and directed. |
| 11 | M&L for15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cementincludingtwo coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat complete all as specified and directed.complete all as specified and directed |
| 12 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement including preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 13 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed. |
| 14 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 15 | Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each complete all as specified and directed. |
| 16 | S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 17 | S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 18 | M & L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling ofhollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed. |
| 19 | S&F steel window/ventilator with tubular frame factory made double shutters of size 79mm x 39mm, 16 gauge rectangular tubular frame withside hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 75 mm long and 10mm square bar grills complete, includingtwo coats of synthetic enamel paint over one coat of red oxide primer includingsufficient nos of PCC bed blocks in pcc 1:2:4 (using 12.5mm gradded aggregate) for fixing hold fast& as shown on drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2. |
| 20 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life complete all as specified and directed. |
| 21 | S&F Factory made Solid PVC Moulded Door Shutterwith wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 22 | S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed. |
| 23 | S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire mesh etc sizes of members as per clause 8.20(a) of SSR Part-I complete all as specified and directed. |
| 24 | S&F 35mm thick HDF prelaminated (Wenga/Teak coloured ) moulded shutter PUF(Poly urathane foam )ninsuation with minimum density 40Kg/Cum filled in between two HDF sheets of thickness 3.2mm both & border covered with 10mm thick PVC sheet as per Drg No. CEPZ/TD-378/sheet 1/1 dated 27/12/2011 complete all as specified and directed. |
| 25 | S&F 35mm thick single piece factory made wire gauge door shutter of (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of MS tube 19 SWG size 19 x 19mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No.CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed. |
| 26 | Preparing wood or wood based new or untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 27 | S&F300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed. |
| 28 | S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked complete all as specified and directed. |
| 29 | S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed. |
| 30 | S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel complete all as specified and directed including necessary welding if required . |
| 31 | S&F Aluminium alloy, anodised, sliding door bolt 300mm longwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 32 | Hacking outold broken glass (any thickness,size,quality or description) from wooden frames,glazed with putty or fixed with beads complete all as specified and directed. |
| 33 | S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes including glass pin complete all as specified and directed. |
| 34 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. |
| 35 | S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg (+-5%) manufactured by ISO 9001-2015 certified company the sheet should be 100% water proof termite proof, fire retardent, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete including all fittings likehandle, hinges, hydraulic stopper, beading etc as per direction of Engineer-in-charge. |
| 36 | S&F 18/19mm thick prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in repair complete all as specified. |
| 37 | S &F woodlipping 6mm thick fixed with nail to boarding of any decription complete all as specifird and directed. |
| 38 | S & F continouspiano hinges (30mm width of flaps when open) mild steel, bright finish complete all as specified and directed |
| 39 | S&F for hasp and staple aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate and fixed with screw complete, |
| 40 | S& F magnetic door catcher for cabinets, complete all as specifed and directed. |
| 41 | S&F glavinized mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or glavinized wire staples complete all as specified and directed. |
| 42 | Preparing the new steel surfaces of any description over 10cm width or girthpriming with red oxide zinc crome and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 43 | Dismantling ofwall tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises, M&L for providing glazed ceramic colouredwall tiles of size 450mmx350mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 44 | Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises,including M&L Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 45 | Dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off permises, including M&Lvitrified ceramic tiles light shade 8 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, infloor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 46 | S&F Non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, infloor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:4completeall as specified. |
| 47 | Taking down cement plaster on brick or concrete surfacesany description including raking out joints hacking for key scrubbing down with water,M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement mixed with and including water proofing coumpound including formwork upto 7M height withtwo coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat complete all as specified and directed.complete all as specified and directed.(Note:- The rate included for WPC ) |
| 48 | Taking down cement plaster on brick or concrete surfacesany description including raking out joints hacking for key scrubbing down with water,M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement includingPreparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 49 | M&L cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth all as specified. |
| 50 | Taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceable pipe,S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length complete all as specified and directed. |
| 51 | Taking up or down GI pipe 15mm bore and connections, including cleaning for refixing or removal unserviceable pipe,S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls complete all as specified and directed. |
| 52 | S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mmBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 53 | All as per srl item No 52 above but capacity of water tank 1000 ltr complete all as specified and directed |
| 54 | S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ballscrewed for iron pipe and fixed complete all as specified |
| 55 | S&F in repairs vitreous china wash down water closet (pedestal pattern)white colour including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti syphonic pipe etc complete all as specified and directed. |
| 56 | S&F in repairs vitreous china squatting pan, Orissa pattern size 580mm x 440mm ivory with integral foot rest includingconnection to drain out pipe and to flush pipe, anti-syphonage pipe etc complete including making good the disturbed flooring of existing specifications complete all as specified and directed. |
| 57 | S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand over 10mm thick rendering in cement mortar 1:4 mixed with liquid water proofing admixture of approved brand complete all as specifed & directed. |
| 58 | M&L for 1:5:10 type E2 cement concrete in foundation , filling and mass concrete complete all as spd and directed |
| 59 | S&F in repair plastic water closet seat cover, back closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 60 | S&F in repairs Viterous China wash basin, white, flat back, size 550x400mmexcluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed. |
| 61 | S&F in repair sinks couplingof required size 50/65/75/100 mm aproved by Engr-in-charge complete all as spcified and directed. |
| 62 | S&F in repair vitreous china wash hand basin oval shape any size including cutting for and pining in ends of brackets or erecting stand, waste coupling and PVC waste pipe, 32mm dia to be fixed in MS brackets complete all as specified. |
| 63 | S&F in rpairs 10 litres PVC low level flushing cistern( white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm diaflush pipe with coupling and fixed complete all as specified and directed. |
| 64 | S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. |
| 65 | S&F grating round 140mm size of PTMT (minium weight 50gms) as in repair, complete all as specified and directed. |
| 66 | S&F in repair 15 bib taps, long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipecomplete all as specified & directed. |
| 67 | S&F in repairs 15mm boreAngle valve fancy type brass chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 68 | Supplied and fixed in repair stop valves (ISI marked),15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 69 | S&F in repair pillar tap brass chromium plated fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 70 | S&F in repairs brass chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 71 | S&F in repair brass Chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. |
| 72 | Supplied and fixed in repairs Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed |
| 73 | S &F in repair Brass CP wall mixer w/o pop up waste system for hot & cold water for 15mm borecomplete fixed to connectionsasall as spd & directed . |
| 74 | S&F beveled edge fancy mirror 5.5mm thick glass of size 600x450mm of selected quality with four holes and catch nut complete design/shape will be approved by Engineer-in-Charge complete all as specified and directed. |
| 75 | Supply & fixing in repair of CP health faucet with 1.00mtr flexible tube &hook fixed with and incl CP screws complete all as specified and directed. |
| 76 | Supply & Fixing in repair Stainless steel Plate rack 1mm thick of size900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as specified and directed. |
| 77 | S&F in repair sinks with drainage boardmade of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 78 | S&F in repair Cabinet Mirror of size 400mmx500mmx6mm thick with frame complete all as specified and directed. |
| 79 | Demolition of cement Concrete(unreinforced)in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed |
| 80 | S&F in repair mild steel curtain rod 25mm dia pre-painted synthetic enamel paint of cherry finishes fixed with screws |
| 81 | S&F in repair MS bracket pre-painted synthetic enamel paint of cherry finishes (turned, weathered and mitred) brackets ofwith cut, hole suitable for 25mm dia rod fixed with screws and gutties in wall . |
| 82 | All as per srl No. 81 above, but end caps with wall ornament and fixed to curtain rod with screws of design/ shape all as specified and directed . |
| 83 | Dismantling/ taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed. |
| 84 | S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 85 | S&F 75 mm bore pipes,PVC (SWR) bends any radius fitting for PVC (SWR) pipes as in repair, complete all as specified and directed. |
| 86 | S&F in repair 32mm bore corrugated PVC waste pipe complete |
| 87 | M&L PCC 1:4:8 type D-2 using 40mm graded agg. as in foundation filling and mass concrete complete all as specified. |
| 88 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition,M&L for RCC type B-1, using 20mm graded crushed aggreage as in slab supported on walls, beams and columns in floors, roofs, landing, ballonies and in shelves and the like complete all as specified and directed. |
| 89 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition,M&L for Providing precast cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specified and directed. |
| 90 | M&L for form work to sides and soffits ofshelvesfor rough finished surfaces of concrete complete all as specified and directed. |
| 91 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 92 | M&L for Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 93 | S&F in repair Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;l adders; framed balusters; walk ways; railings; framework of water tanks, cattle trap and similar work conforming to Fe.290. Gde-E-165,ornamental and intricate design complete all as spd and directed. |
| 94 | S&F in repair vitreous wash down single piece water closet in white including fixing bolts and connection to drain pipe,including seat cover plastic flat bottom and MS chromium plated hinging device complete all as specified and directed. |
| 95 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed and incl CP screws all as specified and directed. |
| 96 | S&F in repairs stop valve concealedfancy type, long shank and cup (ISI marked) brass chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for union bore pipe of 15mm dia. |
| 97 | S&F in repair 5mm thick tinted glass in door/windowshuters with aluminium beading/ glazing clip of both side complete all as specified and directed. |
| 98 | Taking down old broken cast iron pipes from existing sewage line or along plumbing stack along the walls including necessary excavation in trenches where required, removal of surplus soil and returning filling in complete, supplying, laying in trenches or along the walls with MS clamps of standard specifications and jointing 75mm bore PVC 4Kgfwaste and vent pipe ISI marked in any lengthincluding sufficient nos of bendwith or without ears with cement joints laid in floor/walls as in repair, complete all as specified and directed. |
| 99 | Taking down old broken cast iron pipes from existing sewage line or along plumbing stack along the walls including necessary excavation in trenches where required, removal of surplus soil and returning filling in complete, supplying, laying in trenches or along the walls with MS clamps of standard specifications and jointing 110mm bore PVC 4Kgfwaste and vent pipe including sufficient nos of bendISI marked in any length with or without ears with cement joints laid in floor/walls as in repair, complete all as specified and directed. |
| 100 | Refixing of door shutters in same openingof any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed. |
| 101 | Repair the leakage/ seepage/ hole/ crack of roof sheet of any description and in any position and upto 7.5 m height using Super flash Strip 100/150mm wide . |
| 102 | Clean existing reinforcement in Column/Wall with wire brush/ rotary wire brush to make surface free from rust scales, loose material, dirt etc complete and providing applying two coats of rust remover and two coat of alkaline rust converting primer/zinc primer and form a corrosion resitant, insoluble and adherent protective layer, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 1 hour between the coats use. |
| 103 | All as per Srl Item No. 102 Above but In Beams |
| 104 | All as per Srl Item No. 102 Above but In Slab/roof projection |
| 105 | Providing and applying, brush application, curing to form anticorrosive with high bond strength of anticorrosive polymer modified cementitious coating for corrosion inhibiting protection of reinforcement in one layers of total thickness of 2 mm In Column/Wall, complete all as specified. |
| 106 | All as per Srl Item No. 105 Above but In Beams |
| 107 | All as per Srl Item No. 105 Above but In Slab/roof projection |
| 108 | Rebuilding the Column/Wall section of damaged RCC elements to its original size or as directed by Engineer-in-Charge in thickness exceeding 40 mm but not exceeding 100mm by providing and casting with pre-packed dual shrinkage compensated micro concrete of minimum grade of M40 and above including providing and fixing of watertight foam faced finish shuttering all lead and lift mixing placing, deshuttering, levelling the surface by grinding off cementitious slurry of construction joints of differences in any to satisfaction of Engr-in-charge, curing etc, complete all as specified. |
| 109 | All as per Srl Item No. 108 Above but In Beams |
| 110 | Rebuilding the Slab/roof projection section of damaged RCC elements to its original size or as directed by Engineer-in-Charge in thickness not exceeding 60 mm in layers of min thickness exceeding 20 mm and avg thickness 40 mm each by providing and applying ready mised duel shrinkage compensated thixotropic mortar (PMM) of minimum grade M40 and above, including all lead lift, mixing by addition of water only as per manufacture"s recommendation, levelling the surface, curing etc complete all as specified. |
| 111 | M&L for remove all loose gravelcement mortar, dirt, oil, grease andforeign material by jet of dry air and clean thesurface mechanically or by grinding to make it smooth before application loose existing bituminous material manually and with heal torch gun to get smooth plain finished surface with no loose material on surface. Repair alljoints & cracks with highly elastic bituminous cold applied putty tarplasic having penetration after setting upto 8mm Levelling ofsurface to give proper slope will be done as per site requirements with Shalipatch cold applied, Bituminous Motor & Cold emulsion cumwaterproofing liquid Shalikote T-10, Created SSD condition on surface withwater.Prime the surface with Tarfelt LM or equivalent make of approved by GE mixed with portable water in the ration of 1:1 and apply @ 400gm per Sqm (As per surface conditions). Apply first coat of Tarfelt LM or equivalent make of approved by GE having elongation 200% conforming to ASTM-C-412 & having crack bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.50mm conforming to ASTM-C-412 with no dilation of water on primed surface while the surface is still tacky with consumption of 700gm per Sqm. *Lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. *Allow the first coat to dry for 10 to 12 Hrs. *Apply 2nd coat oncuredfirstcoat withconsumption @ 700gm per Sqm inopposite direction of first coat by Brush or Roller. *Allow it to dry for 10-12hrs after apply 3rd coat with consumption @ 700gm per Sqm. |
| 112 | Ensure final curing time of 36 hrs before allowing/carrying out any further work, Conductponding test after min 7 day applying two coats of U V ResistantElastomericExterior Acrylic Weather resistant water proof coatingof Shalicryl-215 or equivalent make ofapproved by GE having elongation of 300% aftercuring of 14 daysconforming to ASTMD-6083—for U VProtection of BituminousElastomeric Acrylic Emulsified Liquid Membrane ofTarfelt LM orequivalentmake of approved by GE to give long life and prevent its deterioration from sunlight. |
| 113 | Preparation of old plastered or unplastered surfaces of ceiling including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying two coat of white wash on ceiling upto 20 meter height with scaffolding complete all as specified and directed.NOTE: The rate should include scaffolding upto 20 mtr height. |
| 114 | Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applyingtwo coat of oil bound distemper on walls up to 20 meter height with scaffolding complete all as specified and directed.NOTE: The rate should include scaffolding upto 20 mtr height. |
| 115 | M&L for Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying two coat of cement base paint of approved colour scheme on wall upto 20 mtr height complete all as specified and directed.NOTE: The rate should include scaffolding upto 20 mtr height. |
| 116 | Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of white wash all as specified & dirrected. |
| 117 | Preparation of old plastered or unplastered surfaces of ceiling including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of white wash on ceiling complete all as specified and directed. |
| 118 | Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applyingone coat of oil bound distemper on walls all as specified and directed |
| 119 | Preparation of old plastered or unplastered surfaces of ceilingincluding cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of oil bound distemper on ceiling complete all as specified and directed |
| 120 | Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applyingtwo coat of oil bound distemper on walls all as specified and directed |
| 121 | Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applyingone coat of Plastic emulsion Paint on wall completeall as specified and directed. |
| 122 | Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying one coat of cement base paint of approved colour scheme on wall complete all as specified and directed |
| 123 | M&L for Preparation of old plastered or unplastered surfaces of walls including cornices pilasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc and applying two coat of cement base paint of approved colour scheme on wall complete all as specified and directed |
| 124 | M&L for preparation of old paintedwooden surfaces of any description not otherwise described over 10cm width or girth andapplying one coat of synthetic enamel paint on old wooden surface complete all as specified and directed |
| 125 | M&L for preparation of old paintedsteel surfaces of any description not otherwise described over 10cm width or girth andand applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed. |
| 126 | M&L for preparation of old surfaces ofwall,roof projection/ window chajjas and similar surfaces and applying two coat of weather proof exterioremulsion paintMake : Apex ultima (Manufactrured by Asian paints) complete all as per manufactured and directed by Engr-in-Charge. Note : - Tint/Shade shall be approved by Engr-in-Charge. |
| 127 | M&L for preparation of old surfaces of wall, roof projection/ window chajjas and similar surfaces and applying one coat weather proof exterior emulsion paint make: Apex ultima(Manufactrured by Asian paints) complete all as per manufactured and directed by Engr-in-Charge. Note : - Tint/Shade shall be approved by Engr-in-Charge. |
| 128 | M&L rendering 10mm thick on concrete in CM 1:3in facia or edging of chajjas,ceiling and roof projection etc incl taking out pealed offplaster/concrete and making goodto cracked RCC surface in true line /shape by providing RCC 1:2:4 type b1 using 20 mm graded crushed stone aggregateincluding all necessary form work to thickness as required at GF and FF level finish even and smoothwithout using extra cementincluding 2 coats of white wash complete all as specified and as directed by eng-in charge.NOTE- the rate will be inclusive of scafolding upto 20 mtr height |
| 129 | M&L for Preparation of existing surface finished by 1 to 2 mm thick of wall care putty on surfaces of wall and applying one coat of asian primer over two coat of oil bound distempr on old wall surfaces complete all as specified and directed. |
| 130 | M&L for preparation of new/old plastered surface and applying priming coat and providing heritage finish (Texture finish with metalic colours in any design) in any shade to colour as approved by Engineer-in-Charge and as per manufacture instructions, complete all as specified and directed. |
| 131 | M&L for preparation of old surface of kerb stone, road lining, arrows etc and applying one coat of road marking paint in any shape and colour as approved by Engr-in-charge. |
| 132 | Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
