Tender For Conservation Works To The Protected Monument - Military Barracks, Ambalavayal, Wayanad District, 2023-24, ambalavayal-Kerala

Tender For Conservation Works To The Protected Monument - Military Barracks, Ambalavayal, Wayanad District, 2023-24- 1 Providing And Fixing Double Scaffolding System ( Cup Lock Type ) On The Exterior Side, Upto Seven Story Hight Made With 40 Mm Dia. M.S. Tube 1.5 M Centre To Centre, Horizontal & Vertical Tubes Joining With Cup & Lock System With M.S. Tubes, M.S. Tube Challies, M.S. Clamps And M.S. Staricase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For The Required Duration As Approved And Removing It There After. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connection With The Building Etc Wherever Required For Inspection Of Work At Required Location With Essential Safety Features For The Workmen Etc. Complete As Per Directions And Approval Of Engineer- In Charge. The Elevational Area Of The Scaffolding Shall Be Measured For Payment Purpose. The Payment Will Be Made Once Irrespective Of Duration Of Scaffolding. Note:- This Item To Be Used For Maintenance Work Judicially, Necessary Deduction For Scaffolding In The Existing Item To Be Done. 2 Felling Trees Of The Girth ( Measured At A Height Of 1 M Above Ground Level ) Including Cutting Of Trunks And Branches, Removing The Roots And Stacking Of Serviceable Material And Disposal Of Unserviceable Material.Beyound 30 Cm Girth Up To And Including 60 Cm Girth. 3 Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared. 4 Demolishing Brick Work In Cement Mortar Manually Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. 5 Demolishing Cement Concrete Manually Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In-Charge.Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) . 6 Dismantling G.S. Sheet Roofing Including Ridges, Hips, Velleys And Gutters Etc., And Stacking The Material Within 50 Meters Lead. 7 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed: All Kinds Of Soil 8 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level: 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 9 Brick Work With Common Burnt Clay F.P.S ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 10 Cement Plaster 1:3 ( 1 Cement : 3 Coarse Sand ) Finished With A Floating Coat Of Neat Cement.12 Mm Cement Plaster. 11 Flush / Ruled Pointing On Stone Work With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) . 12 Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete 13 Providing Corrugate G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete ( Up To Any Pitch In Horizontal / Vertical Or Curved Surfaces ) , Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm / M2. 14 12 Mm Cement Plaster Of Mix 1:4 ( 1 Cement : 4 Coarse Sand ) . 15 Providing Good Quality Anjili Wood / Jack Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) . 16 Providing And Fixing Good Quality Anjili / Jack Wood Paneling Or Paneling And Glazing In Paneled Or Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows ( Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured ) Paneling For Paneled Or Paneled And Glazed Shutters 25 Mm To 40 Mm Thick. 17 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparingthe Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 18 Finishing With Epoxy Paint ( Two Or More Coats ) At All Locations Prepared And Applied As Per ManufacturerS Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete. On Steel Work . 19 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work. 20 Varnishing With Varnish Of Approved Brand And Manufacture :Two Or More Coats Of Glue Sizing With Copal Varnish Over An Under Coat Of Flatting Varnish. 21 Flooring With Laterate Stone 15Cm Depth In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) , Providing Slight Slope Towards Both Edges As Directed By The Engineer-In-Charge. 22 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. 23 Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts , Bolts And Washers As Required Complete As Per The Direction Of Engineer-In- Charge Made Of G.I. Wire Of Dia 4 Mm. 24 Providing And Fixing Of 80X60cm Rectangular Retro-Reflectorised Cautionary, Mandatory And Informatory Sign With 7 Years Warranty Manufactured Asper Irc:67 Made Of Type Iv Micro Prismatic Grade Sheeting Vide Clause 801.3.3 Fixed Over Aluminium Sheeting, 2Mm Thick Aluminium Composite Material Sheeting 4Mm Thick With Suitable Back Supporting Frame Of Ms Angle 25X25x3mm And Supported Gi Pipe Pole 50Mm Nb Confirming To Is:1239 Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete Min Size 45X45x60cm, 60 Cm Below Ground Level Including Painting All Exposed Surface With Two Coats Of Epoxy Paint Over Primer And Asper Approved Drawing And Clause 801 Including Lettering Symbols Etc.

INR 2500 /-

INR 35900.0 /-

INR 14.35 Lakhs /-

Name of Work: Conservation works to the Protected Monument - Military Barracks, Ambalavayal, Wayanad District, 2023-24

Sl. No.	Item Description
1	Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
2	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth.
3	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
4	Demolishing brick work in cement mortar manually means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
5	Demolishing cement concrete manually including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
6	Dismantling G.S. sheet roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 meters lead.
7	Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed: All Kinds of soil
8	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
9	Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
10	Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster.
11	Flush/ Ruled pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand).
12	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
13	Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2.
14	12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).
15	Providing good quality Anjili wood/jack wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
16	Providing and fixing good quality Anjili/ Jack wood paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick.
17	Removing white or colour wash by scrapping and sand papering and preparingthe surface smooth including necessary repairs to scratches etc. complete.
18	Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work .
19	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work.
20	Varnishing with varnish of approved brand and manufacture :Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish.
21	Flooring with laterate stone 15cm depth in cement mortar 1:6 (1 cement : 6 coarse sand), providing slight slope towards both edges as directed by the Engineer-in-charge.
22	Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
23	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge made of G.I. wire of dia 4 mm.
24	Providing and fixing of 80x60cm rectangular retro-reflectorised cautionary, mandatory and informatory sign with 7 years warranty manufactured asper IRC:67 made of type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2mm thick aluminium composite material sheeting 4mm thick with suitable back supporting frame of MS angle 25x25x3mm and supported GI pipe pole 50mm NB confirming to IS:1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45x45x60cm, 60 cm below ground level including painting all exposed surface with two coats of epoxy paint over primer and asper approved drawing and clause 801 including lettering symbols etc.