|
| 1 | Sanskar Ashram |
| 2 | Dehydration & filtration of transformer oil to achieve the die electric strength upto 40KV or above etc. complete as required. |
| 3 | Replacement of silica Gel in the existing 400 KVA GE make 11KV/415V Transformer. |
| 4 | Overhauling and servicing of 11KV HT OCB i/c oiling, greasing of fixed & moving contact & checking testing of tripping mechanism system etc. complete as required. |
| 5 | Topping up new transformer oil in the existing transformer & OCB. |
| 6 | Testing, calibration of IDMT relay set of EE make having 2 Nos. Overcurrent & 1 No. Earth fault in each set by secondary injection method etc.complete as reqd. |
| 7 | Servicing of LT bus coupler i/c cleaning, removal of dust and dirt of the male/female contacts and checking, oiling, greasing of the mechanical system for its smooth trouble free functioning i/c testing etc. as required. |
| 8 | Overhauling and servicing of 11KV HT PT i/c oiling, greasing of fixed & moving contact & checking testing of system etc. complete as required. |
| 9 | Supplying and fixing of 11 KV HT PT Fuses 3 Nos. in the existing 11 KV PT Complete with testing of system etc. complete as required. |
| 10 | D.C office |
| 11 | Overhauling, servicing of 500KVA Dry type transformer 11KV step down complete with cleaning, checking of winding IR value, erathing, neutral and setting of door closer i/c tightening of nut bolts etc. complete as required. |
| 12 | Overhauling, servicing of 11KV HT VCB kirloskar make 630Amp. i/c cleaning, oiling, greasing & checking of tripping & operating mechanism system & cleaning of male female contact with CRC 2-26 send paper tightening of nut bolts i/c adjustment of shutter etc. complete as required. = 1 Job |
| 13 | Overhauling, servicing & repairing of 800-1000Amp. ACB complete with cleaning & adjustment of moving & fixed contacts, nut bolts tightening of all electrical & mechanical parts of ACB checking of all contacts etc. complete as required. |
| 14 | Fabrication, supplying & fixing of trench covers made out of 6mm thick M.S checkered sheet, arrangement P/F of 25mm x 25mm x 3mm M.S angle iron suitable cross angle in Z shaped) i/c cutting edges, grinding and painting with enamel black coloured paint with two or more coat to give even shine after applying red oxide paint etc complete as required at site. |
| 15 | Supplying & fixing of handle of size 5”x2” made of ½” dia M.S road for opening and closingtheexisting sheet cover drilling holes, welding and painting etc. complete as required at site. |
| 16 | Cleaning of existing cable trench of Existing size & depth by lifting bolders, domestic waste, soil, bricks dabris & garbage etc by providing suitable temporary angle support on hire charges etc to bear the load of cables of different size without disturbing the connection of cables and shifting the lifted malba complete as required at site. |
| 17 | Dressing of different size LT cable in existing cable trench from 35 Sq.m to 400 Sq.mm with clamp along the side of trench each cable etc as reqd. at site. |
| 18 | Supplying fixing and welding M.S. angle of (40X40X5) MS on both edges of existing trench i/c painting etc. as reqd. |
| 19 | Fabrication, supplying & erection of wiremesh of netting enclosure made out of 40 x40 x6 mm.Thick (M.S) angle iron & T-section covered with wiremesh of size 75mmx 25mmx6 SWC thick duly welded on angle iron frame work i/c having lockable type openable door with heavy duty godown type lock/padlock type locking arrangement 0.55 mtr. long at the corner & grouting thr legs with C.C of 1:3:6 i/c painting with one coat of red oxide & two coat of enameled painting, welding etc. as required. |
| 20 | Painting of existing MS chequered plate panels, bus cuplor with grey/black coloured enameled paint with two or more coat after removing the rust & grease/Oil with help of emery paper etc complete as required at site. |
| 21 | Spray/brush painting of LT Panel, Emergency Panel, Poles, DB\"s, Rising Mains with Doors, conduit, wiremesh, shutter, fire fighting system, cylinder, down comer system & other Electrical equipment in electric room with two coat of epoxy paint of approved colour & shade including scrapping of old paint wherever required i/c applying Primer/emery paper to make the surface smooth and cleaning all dirt & rust & also marking switch locations with white colour paint complete etc. as required. |
| 22 | Credit for old dismantle materials i.e M.S angle, M.s chequered sheet, M.S Rolling shutter scrapes sets etc. all items. |
