Rural Development Department has published Tender For Construction Of Model School New Work At Zpps Amla Tq.Georai Dist. Beed. Submission Date for this Tender is 31-07-2023. Building Work Tenders in georai Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | LIBRARYExcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means |
| 2 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 3 | Providing and laying Cast in situ/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 4 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundationslike raft,strip foundations,grillage and footings ofR.C.C. columnsand steel stanchions etc. including bailing outwater,Steel centeringformwork,laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curingetc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steelcentering,formwork,cover blocks, laying/pumping, compactionand roughening the surface if special finishistobe providedandcuring etc. complete.(Excludingreinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate Crushed sand VSI Grade |
| 7 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 8 | Filling in plinth and floors with contractors aterial/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete. |
| 9 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 10 | Providing and fixing MS Angle frame of 40x40x5 mm size for Doorincluding provision of fixing aldrop, tower bolt & hinges including one coat anticorossive oil paint primer coat etc. complete. |
| 11 | Providing and fixing MS Angle frame of 40x40x5 mm size forwindow doors including provision of fixing aldrop, tower bolt & hinges including one coat anticorossive oil paint primer coat etc. complete. |
| 12 | Providing and fixing in position mild steel door and windowshutters including mild steel angle frame of size 25x25x5 mm for fixing mild steel sheet 22 guage including welding fixing to frame and all necessary fixtures including electrostatic powder coating etc. complete Spec.No. As per directed Engineer Incharge |
| 13 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) |
| 14 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 15 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beamscolumns,canopies,staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as perdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 16 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 17 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. |
| 18 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. |
| 19 | Providing fine cementfinish 1.5 mm thick over plastered surface including scaffolding etc. as. Directed by Engineer in charg. |
| 20 | Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaningetc. complete. |
| 21 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete |
| 22 | Providing and applying washable oil-bound distemper of approvedcolour andshade to old andnewsurfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 23 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. |
| 24 | Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colourtonewstructuralsteelworkandironworkinbuildingsincludingscaffoldingif necessary, cleaning and preparing the surface etc.complete. (excluding primer coat). |
| 25 | VERTUAL ROOM Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means |
| 26 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 27 | Providing and laying Cast in situ/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 28 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundationslike raft,strip foundations,grillage and footings ofR.C.C. columnsand steel stanchions etc. including bailing outwater,Steel centeringformwork,laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 29 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curingetc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 30 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steelcentering,formwork,cover blocks, laying/pumping, compactionand roughening the surface if special finishistobe providedandcuring etc. complete.(Excludingreinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate Crushed sand VSI Grade |
| 31 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 32 | Filling in plinth and floors with contractors aterial/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete. |
| 33 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 34 | Providing and fixing MS Angle frame of 40x40x5 mm size for Doorincluding provision of fixing aldrop, tower bolt & hinges including one coat anticorossive oil paint primer coat etc. complete. |
| 35 | Providing and fixing MS Angle frame of 40x40x5 mm size forwindow doors including provision of fixing aldrop, tower bolt & hinges including one coat anticorossive oil paint primer coat etc. complete. |
| 36 | Providing and fixing in position mild steel door and windowshutters including mild steel angle frame of size 25x25x5 mm for fixing mild steel sheet 22 guage including welding fixing to frame and all necessary fixtures including electrostatic powder coating etc. complete Spec.No. As per directed Engineer Incharge |
| 37 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) |
| 38 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 39 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beamscolumns,canopies,staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as perdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 40 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. |
| 41 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. |
| 42 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. |
| 43 | Providing fine cementfinish 1.5 mm thick over plastered surface including scaffolding etc. as. Directed by Engineer in charg. |
| 44 | Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaningetc. complete. |
| 45 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete |
| 46 | Providing and applying washable oil-bound distemper of approvedcolour andshade to old andnewsurfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. |
| 47 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. |
| 48 | Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colourtonewstructuralsteelworkandironworkinbuildingsincludingscaffoldingif necessary, cleaning and preparing the surface etc.complete. (excluding primer coat). |
| 49 | KITCHEN SHEDExcavation for foundation in Earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and strutting) etc. complete. (above 1.50 meters lift) Spec.No.Bd.A.I itme no 21.02 |
| 50 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 51 | Providing and layingin situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete for footingas per detailed designs and drawings, or as directed including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface of roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement)Spc.No.BD.F3itme no 25.11 |
| 52 | Providing and casting in situ cement concret M20(1:1 1/2:3) of hard trap stone metal for R.C.C. Column including compacting compackting curing etc excluding cost of reinforcementSpecicationNo Bd. F5itme no25.31 |
| 53 | Providing and casting in situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings, or as directed including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface of roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement)Spc.No.BD.F6 itme no |
| 54 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete.Spc.No.BD.G1itme no27.01 |
| 55 | Filling in plinth and floors withContrctor"s soil, sand or murum in 15cm to 20cm layers including watering and compaction etc. complete. Spec.No.Bd.A.11 page item no 21.37 |
| 56 | Providing second class burnt brick masonry with conventional/ Indian standard type bricks in cement mortar 1:6 in Super stuctureincluding striking joints, caffolding,racking out joints, watering complete.Spec.No.Bd.G.5. itme no 27.05 |
| 57 | Providing and fixing MS Angle frame of 40x40x5 mm size for Door /window doors including provision of fixing aldrop, tower bolt & hinges including one coat anticorossive oil paint primer coat etc. complete. Spec.NoBdT PAGE NO 313.( SSR 2021-22 Item no 39.36 page no 313 ) |
| 58 | Providing and fixing in position mild steel door and windowshutters including mild steel angle frame of size 25x25x5 mm for fixing mild steel sheet 22 guage including welding fixing to frame and all necessary fixtures including electrostatic powder coating etc. complete Spec.No. As per directed Engineer Incharge.( SSR 2021-22 Item no -- page no---) |
| 59 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade)Spec.No.BDF 9. itme no 26.05 |
| 60 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Spec.No.BDF 8. itme no 25.70 |
| 61 | Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. |
| 62 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beamscolumns,canopies,staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as perdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec.No.BdF17item no 26.33 |
| 63 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.Spec.No.Bd.L 1. itme no 32.01 |
| 64 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete. |
| 65 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete.(SSR Item no32.11Bd.L.7 Page Number 369 |
| 66 | Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaningetc. complete.(SSR Item no33.01)Bd.M.1 Page Number 379 |
| 67 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.Spec.No.Bd.P 1A. itme no 36.03 |
| 68 | Providing and applying washable oil-bound distemper of approvedcolour andshade to old andnewsurfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.(SSR Item no36.11)Bd.P.5 Page Number 413 |
| 69 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.Complete |
| 70 | Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colourtonewstructuralsteelworkandironworkinbuildingsincludingscaffoldingif necessary, cleaning and preparing the surface etc.complete. (excluding primer coat). |
| 71 | Providing and preparing kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. |
| 72 | COUMPOUND WALL Excavation for foundation in Earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and strutting) etc. complete. (above3.0 meters lift) |
| 73 | Providing Dry trap rubble stone soling 15 to 20 MM Including hand packing |
| 74 | Providing and laying Cast in situ/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 75 | Providing and layingin situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete for footingas per detailed designs and drawings, or as directed including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface of roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement)Spc.No.BD.F3 page no 298 |
| 76 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundationslike raft,strip foundations,grillage and footings ofR.C.C. columnsand steel stanchions etc. including bailing outwater,Steel centeringformwork,laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 77 | Providing and casting in situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings, or as directed including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface of roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement)Spc.No.BD.F6 page no 300 |
| 78 | Providing second class burnt brick masonry with conventional/ Indian standard type bricks in cement mortar 1:6 in Super stuctureincluding striking joints, caffolding,racking out joints, watering complete.Spec.No.Bd.G.4. Page No.314 |
| 79 | Providing and casting in situ Plain Cement Concrete 1:2:4 of trap/ granite/ quartzite/ gneiss metal for Coping to parapet wall of required thickness including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and ven surface of roughening the surface if special finish is to be provided and curing etc.complete.Spc.No.BD.F11 page no 304 |
| 80 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paintofapprovedcolourandshadeetc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.Number: As directed by Engineer- in-charge. |
| 81 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beamscolumns,canopies,staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as perdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 82 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. |
| 83 | Providing and applying two coats of water proof cement paint of approved manufacturer & of approved colour to the plaster surface including scaffolding if necessary, cleaning and preparing the surface watering of two days complete. Spec.No.Bd.O.8. Page No. 406 |
| 84 | BOYS TOILET Excavation for foundation in Earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and strutting) etc. complete. (above 1.50 meters lift) Spec.No.Bd.A.Iitme no 21.02 |
| 85 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete..Iitme no 21.40 |
| 86 | Providing and laying Cast in situ/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Iitme no 24.01 |
| 87 | Providing and layingin situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete for footingas per detailed designs and drawings, or as directed including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface of roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement)Spc.No.BD.F3itme no 25.11 |
| 88 | Providing and casting in situ cement concret M20(1:1 1/2:3) of hard trap stone metal for R.C.C. Column including compacting compackting curing etc excluding cost of reinforcementSpecicationNo Bd. F5itme no25.31 |
| 89 | Providing and casting in situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings, or as directed including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface of roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement)Spc.No.BD.F6 itme no 25.50 |
| 90 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete.Spc.No.BD.G1itme no27.01 |
| 91 | Filling in plinth and floors withContrctor"s soil, sand or murum in 15cm to 20cm layers including watering and compaction etc. complete. Spec.No.Bd.A.11 page item no 21.37 |
| 92 | Providing second class burnt brick masonry with conventional/ Indian standard type bricks in cement mortar 1:6 in Super stuctureincluding striking joints, caffolding,racking out joints, watering complete.Spec.No.Bd.G.5. itme no 27.05 |
| 93 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.Spec.No.Bd.G.7. itme no 27.06 |
| 94 | Providing and fixing MS Angle frame of 40x40x5 mm size for Door /window doors including provision of fixing aldrop, tower bolt & hinges including one coat anticorossive oil paint primer coat etc. complete. Spec.NoBdT PAGE NO 313.( SSR 2020-21 Item no 39.36 page no 313 ) |
| 95 | Providing and fixing in position mild steel door and windowshutters including mild steel angle frame of size 25x25x5 mm for fixing mild steel sheet 22 guage including welding fixing to frame and all necessary fixtures including electrostatic powder coating etc. complete Spec.No. As per directed Engineer Incharge.( SSR 2020-21 Item no -- page no---) |
| 96 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Spec.No.BDF 8. itme no 25.70 |
| 97 | Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwithtwocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.(SSR Item no 31.09) BDJ 938 |
| 98 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beamscolumns,canopies,staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as perdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec.No.BdF17item no 26.33 |
| 99 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.Spec.No.Bd.L 1. itme no 32.01 |
| 100 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Spec.No.Bd.L 2A. itme no 32.04 |
| 101 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete.(SSR Item no32.11Bd.L.7 Page Number 369 |
| 102 | Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete..Spec.No.Bd.M13. itme no 33.25 |
| 103 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.Spec.No.Bd.P 1A. itme no 36.03 |
| 104 | Providing and applying washable oil-bound distemper of approvedcolour andshade to old andnewsurfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.(SSR Item no36.11)Bd.P.5 Page Number 413 |
| 105 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete.(SSR Item no35.13)Bd.0.8 Page Number 406 |
| 106 | Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colourtonewstructuralsteelworkandironworkinbuildingsincludingscaffoldingif necessary, cleaning and preparing the surface etc.complete. (excluding primer coat).(SSR Item no35.04)Bd.0.3 Page Number 404 |
| 107 | ProvidingandfixingOrissatypewhiteglazedearthenware575mmwaterclosetpan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.BDV Item No 42.30 |
| 108 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap withsymphoniclowlevelwhiteglazed10litrescisternwithblackbackliteseatwithall necessary pipe connection etc. complete.BDV 42.34 |
| 109 | Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)BDV 45-42.18 |
| 110 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting andfixingofaccessoriessuchasinlet,outletoverflowpipeinclusiveofalltankscapacity between 200 to 1000 litersBDV -42.53 |
| 111 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.15 MM Dia CPVC Pipe |
| 112 | 20 MM Dia CPVC Pipe |
| 113 | Providing , laying and fixing ,jointing Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. |
| 114 | GIRLS TOILET Excavation for foundation in Earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering (including shoring and strutting) etc. complete. (above 1.50 meters lift) Spec.No.Bd.A.Iitme no 21.02 |
| 115 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete..Iitme no 21.40 |
| 116 | Providing and laying Cast in situ/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Iitme no 24.01 |
| 117 | Providing and layingin situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete for footingas per detailed designs and drawings, or as directed including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface of roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement)Spc.No.BD.F3itme no 25.11 |
| 118 | Providing and casting in situ cement concret M20(1:1 1/2:3) of hard trap stone metal for R.C.C. Column including compacting compackting curing etc excluding cost of reinforcementSpecicationNo Bd. F5itme no25.31 |
| 119 | Providing and casting in situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings, or as directed including centering, form work, compaction and finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface of roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement)Spc.No.BD.F6 itme no 25.50 |
| 120 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposedfaces, raking out joints on exposedfaces and watering etc. Complete.Spc.No.BD.G1itme no27.01 |
| 121 | Filling in plinth and floors withContrctor"s soil, sand or murum in 15cm to 20cm layers including watering and compaction etc. complete. Spec.No.Bd.A.11 page item no 21.37 |
| 122 | Providing second class burnt brick masonry with conventional/ Indian standard type bricks in cement mortar 1:6 in Super stuctureincluding striking joints, caffolding,racking out joints, watering complete.Spec.No.Bd.G.5. itme no 27.05 |
| 123 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.Spec.No.Bd.G.7. itme no 27.06 |
| 124 | Providing and fixing MS Angle frame of 40x40x5 mm size for Door /window doors including provision of fixing aldrop, tower bolt & hinges including one coat anticorossive oil paint primer coat etc. complete. Spec.NoBdT PAGE NO 313.( SSR 2020-21 Item no 39.36 page no 313 ) |
| 125 | Providing and fixing in position mild steel door and windowshutters including mild steel angle frame of size 25x25x5 mm for fixing mild steel sheet 22 guage including welding fixing to frame and all necessary fixtures including electrostatic powder coating etc. complete Spec.No. As per directed Engineer Incharge.( SSR 2020-21 Item no -- page no---) |
| 126 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)Spec.No.BDF 8. itme no 25.70 |
| 127 | Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwithtwocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.(SSR Item no 31.09) BDJ 938 |
| 128 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beamscolumns,canopies,staircase,newels, chajjas, lintels pardis, copings, fins, arches etc. as perdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec.No.BdF17item no 26.33 |
| 129 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.Spec.No.Bd.L 1. itme no 32.01 |
| 130 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.Spec.No.Bd.L 2A. itme no 32.04 |
| 131 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete.(SSR Item no32.11Bd.L.7 Page Number 369 |
| 132 | Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete..Spec.No.Bd.M13. itme no 33.25 |
| 133 | Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete.Spec.No.Bd.P 1A. itme no 36.03 |
| 134 | Providing and applying washable oil-bound distemper of approvedcolour andshade to old andnewsurfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.(SSR Item no36.11)Bd.P.5 Page Number 413 |
| 135 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete.(SSR Item no35.13)Bd.0.8 Page Number 406 |
| 136 | Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colourtonewstructuralsteelworkandironworkinbuildingsincludingscaffoldingif necessary, cleaning and preparing the surface etc.complete. (excluding primer coat).(SSR Item no35.04)Bd.0.3 Page Number 404 |
| 137 | ProvidingandfixingOrissatypewhiteglazedearthenware575mmwaterclosetpan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.BDV Item No 42.30 |
| 138 | Providing and fixing European type white glazed earthenware coupled closet symphonic trap withsymphoniclowlevelwhiteglazed10litrescisternwithblackbackliteseatwithall necessary pipe connection etc. complete.BDV 42.34 |
| 139 | Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)BDV 45-42.18 |
| 140 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting andfixingofaccessoriessuchasinlet,outletoverflowpipeinclusiveofalltankscapacity between 200 to 1000 litersBDV -42.53 |
| 141 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.15 MM Dia CPVC Pipe |
| 142 | 20 MM Dia CPVC Pipe |
| 143 | Providing , laying and fixing ,jointing Eco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. |
| 144 | HAND WASH STATIONProviding and fixing white glazedearthenware WashHandBasinof 55cm.x40cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 145 | Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories suchas inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 146 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 147 | ELECRTIFICATION Point wiring for light/fan/bell in 20 mm metal conduit with1.5 sq.mm (2+1E) FR grade copper wire, flush type switch,earthing and required accessories as per specification No: WGPW/ SW 1-9-1 |
| 148 | Point wiring for plug on board of light or fan as per specification NO: WG-PW/SWHPL Make |
| 149 | Supplying & erecting mains 2x1.5 sq.mm. and earth wire 1.5 sq.mm FR PVC copper wire, ISI mark HMS PVC conduit min. 20mm dia, as per specification No: WG-MA/PC. |
| 150 | Supplying and erecting double pole metal clad switch with HC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP . |
| 151 | Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF |
| 152 | Supplying and erecting HMS PVC conduit 20 mm dia.with PVC accessories on wall / ceiling as per specification No:WG-MA/CON. |
| 153 | Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WGMA/BW |
| 154 | Supplying and erecting ISI mark shockproof 3 pin plug socket 16A with porcelain base/ flushtypeerected on Filled polypropylene ISI marked (IS:14772-2000) board or polishedthick varnished double wooden block / folded or screwedboard with top of either wooden/3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Sunmica with S M screws and duly connected.Ketco make |
| 155 | Supplying and erecting ISI mark shockproof piano type porcelain base switch 250 V 16 A, erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden/ folded or screwed board with top of either wooden/ 3 mm thick hylam sheet/ 4mm thick plywood pastedwith 1.5 mm thick Sunmica with S M screws and duly connected.make Ketco |
| 156 | Supplying & erecting mains with2x2.5 sq.mmF.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW HPL Make |
| 157 | Supplying and erecting electronic type step regulator complete erected on provided switch board.Ketco make |
| 158 | Supplying & erecting approved make 1 x T8 40/36W white stove enamelled / powder coated box type fluo.fitting with 40 Watts. polyester heavy duty copper wound ballast, fixed at ceiling or on wall as per specification no.FG-IDF/BFF Khatan make |
| 159 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution boardas per specification No. SW-SWR/MCBHPL make |
| 160 | RAIN WATER HARVESTING ProvidingandfixingP.V.C.Rainwaterpipesof110mmouterdiameterandhavingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992includingproperrainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket withsolventcementandproperlyrestingtheshoeofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. ITEM NO 42.87 SSR 2021-22 |
| 161 | RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame&cover,PVCrungsetc.including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shallbe inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge |
| 162 | Testing Charges As per Estimate |
| 163 | Royalty Charges as per Estimate |
| 164 | GST 18% as Per Estimate |
| 165 | Labour Insurance |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
