Chennai Port Trust-CPT has published Tender For Tender For Renovation Work For The Cisfs Mess Located At Ground Floor Of B - Coy Building Of Cisf Barracks In Ex(C )South Division. Submission Date for this Tender is 07-08-2023. Barrack Tenders in chennai Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 1.Dismantling and removing the existing damaged floor plastering/floor tiles / mosaic in Cement mortat and bringing down the debris to the ground level wherever required without damaging the nearby structures and deposting within a lead of 50mand for disposal all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. |
| 2 | 2.Dismantling old plaster or skirting including wall dadooing and raking out joints and cleaning the surfacefor providing glaze tile dadooing including disposal of rubbish to theground level within a lead of 50m for disposal all asper direction of Engineer-in-charge andas per site condition of work including all labour, tools, tackles, equipments, transport, fuel etc, complete. |
| 3 | 3.Dismantling and removing the existing damaged Wooden/PVC/FRPdoorsofarealessthan3M2including main frame with shutters and MS hold fast if any, by cutting the masonry/concrete wherever required without any damages tonear bystructure, transporting and handing over the serviceable materials to the departmental stores/RSD yard andstacking the debris if any, at ground level within a lead of 50m for retransportation and disposal at alead of 1km allas per relevant specification andall asper direction of Engineer-in-charge including all labour, tools, equipment, transport, fuel, etc., complete. |
| 4 | 4.Dismantling and removing the existing wornout MS grills, grill gates etc., like steel work manually/ by mechanical means in built up sections without any damages tonear bystructure, transporting and handing over the serviceable materials to the departmental stores/RSD yard andstacking the debris if any, at ground level within a lead of 50m for retransportation and disposal at alead of 1km allas per relevant specification and all as per direction of Engineer-in-charge as per site condition of work including all labour, tools, tackles, equipments, transport, fuel, etc, complete. |
| 5 | 5.Demolishing of leaner mix cement concrete inmanually/ by mechanical meansto the required depth including stacking wherever requiredwithoutdamaging the nearby structures including collecting andbringing debris to the ground leveland depositing the debris within a lead of 50m for disposal all asper direction of Engineer-in-charge andas per site condition of work including all labour, tools, tackles,equipments,transport, fuel,etc, complete. |
| 6 | 6.Dismantling and removing thebrick work manually/ by mechanical meansin Cement Mortar to the required size and shape at all height / levelwherever requiredwithoutdamaging the nearby structures including collecting andbringingdown the debris to the ground leveland depositing the debris within a lead of 50m for disposingall as specified andas directed at site, including all all labour, tools, tackles, equipments, fuel, scaffolding, etc., complete |
| 7 | 7.Earthwork excavation upto 1.5m by manually/mechanically in ordinary soil, sand, clay, mixed with roots, boulders, weighing individually less than 250 kg. debris, rubbish etc., as existing at site of work up to 1.5m depth for hardenning area, chamber, seweage line and where ever required, andas directed at site, including dressing of sides, dewatering if any as specified under relevant specifications, depositing the excavated earth within a lead of 50m all asper direction of Engineer-in-charge including shoring, shuttering, labour, tools tackles equipments, fuel, etc., complete. |
| 8 | 8. Providing, fixing and laying in position rigid unplasticised PVC pipes for Rain water, sewage and drainage line (Finolex or Truebore or Varun or equivalent) including necessary bends, clamps and specials, etc., and wherever required including cutting the brick masonry/concrete, refilling with cement mortar and making good the disturbed portions including jointing the pipes using necessary adhesives,making the joints water tight all as directed at site of work, including cement and all materials, labour, tools, scaffolding, equipments, etc., complete. (a) 110mm dia (4Kgf/Sq.cm) |
| 9 | 8(b). 75mm dia (4Kgf/Sq.cm) |
| 10 | 8(c).150mm dia (6Kgf/Sq.cm) |
| 11 | 9.Providing and fixing in position First Class country wood (SAL/PADAUK) wrought main frames of finished size 95x70mm for doors with necessary M.S. hold fasts/clamps fixed suitably to the masonry/concrete including cutting pockets and grouting with P.C.C.1:3:6 (1 Cement : 3 Crushed stone sand : 6 graded down stone aggregate of 20mm down size) etc., and applying two coats of oil type wood preservative of approved brand and manufacture, complete. as per direction of Engineer-in-chargeincluding all labour, materials,tools, equipments, etc., complete. |
| 12 | 10.Providing and fixing First class country wood (SAL/PADAUK),30mm thick panelled shutters for doors/windows and fixing with butt hinges of required size with necessary screws, including panelling 16mm tk with single leaves / double leaves all complete adopting Port Authority"s manual anddirection of Engineer-in-charge including all labour, materials, tools, equipments, etc.,complete. Note:Butt hinges with necessary screws shall be paid separately. |
| 13 | 11.Supplying and fixing good quality pre polished granite sink (Orissa pattern of size 1000x500x300mm (overall) with placing on the brick on edge wall with CM 1:3 (1Cement : 3 crushed stone sand) including necessary sink waste coupling, spring hose pipe all as directed at site of work includingcuring, cement and all other materials, labour, tools, equipments etc., complete. |
| 14 | 12.Preparing the surfaces of floor/wall and plastering in cement mortar 1:3 (1cement : 3 CSsand)20mm thick and with neat cement slurryto the required finish, curing etc., all as directed at siteincluding cement, alllabour, materials, tools, equipments, scaffolding, etc. complete. |
| 15 | 13.Providing Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V levelin CM 1:4 (1 cement : 4 crushed stone sand) for all super structuresand wherever requiredallas directed at site, including cement, all labour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 16 | 14.Providing Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in CM 1:5 (1 cement : 5 crushed stone sand) including making horizontal and vertical grooves 10mm wide 12mm deep complete and wherever required allas directed at site, including cement, all abour, materials, scafolding, tools, curing, equipments, etc., complete. |
| 17 | 15.Providing and placing institu kitchen platform of Reinforced Cement Concrete 75mm thick above plinth upto foor V of mix 1:1.5:3 in volumetric proportions (1 cement : 1.5 crushed stone sand : 3 graded stone aggregate (hard granite) 20mm nominal size in volumentry proportion all as per relevant specification and as directed at site including necessary formwork, mixing, transporting, placing, ramming, consolidating, scaffolding shuttering vibrating, including cement, all labour, materials, curing, equipment, tools, etc. complete. |
| 18 | 16.Providing, casting,and fixing in position of RCC precast cover slab 75mm thick incement concrete of mix 1:1.5:3 involumetric proportions (1 cement : 1.5 crushed stone sand : 3 stone aggregate (hard granite) of 20mm nominal size) inculding finishing the exposed surface,in cement mortor 1:3 (1cement 3 crused stone sand) 6 to 10mm thick with a floting coat of neat cement punning all as per relevant specification and as directed at siteincluding mixing, transporting, placing, ramming, consolidating, etc. including scafolding,shuttering, vibrating including cement, all labour, materials, curing, equipment, tools, etc. complete. |
| 19 | 17.Providing and laying of PCC forlevelling course in CC 1:4:8 in volumetric proportions (1 cement : 4 crushed stone sand : 8 graded stone aggregate 40mm nominal size)consolidated including necessary excavation, levelling & dressing & finishing the top smooth all as per relevant specification as directed at siteincluding cement, all labour, materials, tools, equipments,etc., complete |
| 20 | 18.Providing and laying of PCC forlevelling course in CC 1:2:4 involumetric proportions (1 cement : 2 crushed stone sand : 4 stone aggregate (hard granite) 40mm nominal size) consolidated including necessary excavation, levelling & dressing & finishing the top smooth all as per relevant specification as directed at siteincluding cement, all labour, materials, tools, equipments,etc., complete |
| 21 | 19.Providing and layingof polished Granite slab of 18mm thickness in kitchen platformand wherever required approved colour (steel grey) or of nearestsize available in the marketwith required slope and fixed with neat CM 1:4 (1 cement : 4 crushed stone sand)including cutting the masonry wall for fixing the slab in position including cost of cement and other materials, nosing the granite slab,labour, tools, equipments,etc., complete. |
| 22 | 20.Supplying, fabricating and placing in positionThermo-Mechanically Treated bars of grade Fe-500D (TMT steel bars) or more as reinforcement for all RCC works wherever required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per relevant specification, drawings and as directed,including steel, all materials, labour, tools, equipment, transport, fuel, etc., complete. Note: The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., Binding wire will not be measured for payment purpose. |
| 23 | 21.Preparing the surfaces of wall and plastering in Cement Mortar 1:5 (1cement : 5 crushed stone sand) 12 mm thick in all floors to the required finish, curing etc., all as directed at site including cement, alllabour, materials, tools, equipments, scaffolding, etc. complete. |
| 24 | 22.Supplying and fixing of gully trap with chamber required size as per drawing no CEM/69A/91 (Chennai Port Trust Civil Engineering Works Manual drawing Amended) all as per relevant specifications and as directed including all materials, labour, tools, equipments etc., complete. |
| 25 | 23.Providing and fixing 110mm dia PVC Nahani trap (floor trap with grattings suitable for PVC waste water pipe) embedding the trap making the joints water tight etc., allas directed including allmaterials, labour, tools, equipments etc., complete. |
| 26 | 24.Supplying, fabricating and fixing the M.S Grill as directed at site using suitable 12mm MS Square bars, verticle 100mm c/c and horizontal 400mm c/c and making necessary pocket (dismantling the existing brick work) includingprovidingand fixing necessaryarrangements including fixing the Grill to the pocketwithPCC 1:2:4(1 cement: 2 crushed stone sand : 4 stone graded aggregate of 20mm graded down to 12mm size) in volumetric proportions etc.,all as directed at site of work including scaffolding, fixing grill in proper alignment, including cement, alll materials, labour, tools, transport, fuel , etc., complete NOTE:1. The payment is based on the total weight of theMS flats, bars, etc as fabricated.2. The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment. etc., will be borne by the contractor. |
| 27 | 25.Providing and fixingprelaminated 12mm particle board for aluminium partition with one side decorative and other side lamination, flat pressed 3 layer & graded balancing lamination, flat pressed 3 layer & graded (medium density)allas directed including allmaterials, labour, tools, screws, cleat, equipments etc., complete. Note: Before fixing the frame applying two coats of synthetic enamel paints over a one coat of wodden primer. |
| 28 | 26.Providing and fixing aluminium fittings ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws allas directed including allmaterials, labour, tools, screws, equipments etc., complete. (a) Butt Hinges 125mm Long |
| 29 | 26(b). Butt Hinges 100mm Long |
| 30 | 26(c). Tower bolt / draw bolt-250mm long |
| 31 | 26(d). Tower bolt / draw bolt-150mm long |
| 32 | 26(e). Tower bolt / draw bolt-100mm long |
| 33 | 56(f). Aldrop 250 mm long |
| 34 | 26(g). Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete |
| 35 | 26(h). Providing and fixing aluminium handles 75mm with plate 125x32mmISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws allas directed including allmaterials, labour, tools, screws, equipments etc., complete. |
| 36 | 27.Providing and fixing in position First Class country wood (SAL/PADAUK) wrought main frames of finished size 0.075x0.0254mm for cupboard/kitchen shutters with necessary coach screws allas directed including allmaterials, nails, screws, adhesive fevicol, labour, tools, equipments etc., complete. Note: Before fixing the frame applying two coats of synthetic enamel paints over a one coat of wodden primer |
| 37 | 28.Providing and fixing of 18mmthick commercial ply wood and fixing laminated sheet on two side for cupboard shutter andedges to be painted with polyurethane primer and befor placing teakwood lipping all round the shutter allas directed including allmaterials, nails, screws, adhesive, labour, tools, equipments etc., complete. Note: Necessary fixtures like butt hinges, tower bolts, etc., will be paid under relevant item of this schedule. |
| 38 | 29.Supplying and fixing good quality insects preventing aluminium meshgrade 304 as 18x16x0.24 dia to main frame of the doors etc. wherever required after removing the old damaged mesh including providing powder coated aluminium profile size 43/8 x117.4x 1.00mm (Vertical and Horizontal as required numbers ) on all thesides of the existing wooden frames with necessary requred fittings of the screen all of approved qualityand as directed at site of work including all labours, materials, fabrication, tools equipments etc., complete. |
| 39 | 30.Supplying and fixing of good quality insects preventing PVC netlon mesh consisting of 1.8mmx1.8mm apexture for size (Approx) to the window openings andventilators etc., and wherever required after removing the old damaged mesh including providing 25mm wide hook fasteners nailed stabled continuously on all the four sides of the wooden frames and loop fasteners tailored on the edges of the screen all of approved quality and as directed at site of work including all labours, materials, fabrication, tools, equipments, scaffoldings, etc., complete. |
| 40 | 31.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20mm dia pipes(Trubore/Finolex) or equivalent having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for Concealed work all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., and T.W plugs/clamps, including punching the masonry/concrete wherever required including all labour, materials, tools, equipments, scaffolding etc., complete. |
| 41 | 32.Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20mm dia pipes(Trubore/Finolex) or equivalent having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing, including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge for External work, including all labour, materials, tools, equipments, scaffolding etc., all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., and, including punching the masonry/concrete wherever required. |
| 42 | 33.Providing and laying Vitrified tiles for flooring conforming to IS :15622 (thickness to be specified by the manufacturer) with good quality (Jhonson/ Kajaria/Nitco or other approved brands) of size 600mmx600mm or of nearest approved size andcolour match with existing and water absorption less than 0.08%, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments set including pointing in white cement mixed with pigment of matching shade complete., including all materials, labour, brushes, tools, equipment, plants, transport, fuel, etc., complete. |
| 43 | 34.Providing and laying Ceramic glazed floor tiles of size 300x300mm with good quality, Anti-skid ceramic tiles (Jhonson/Kajaria/Nitco or other approved brands)(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments including pointing the joints with white cement and matching pigments etc., complete., and as directed at site, including all materials, labour, tools, equipments, , etc., complete. |
| 44 | 35.Providing and laying Vitrified tiles for skirting of 150mm height conforming to IS :15622 (thickness to be specified by the manufacturer) with good quality (Jhonson/ Kajaria/Nitco or other approved brands) of size 600mmx600mm or of nearest approved size andcolour match with existing and water absorption less than 0.08%, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 crushed stone sand) jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments set including pointing in white cement mixed with pigment of matching shade complete., including all materials, labour, brushes, tools, equipment, plants, transport, fuel, etc., complete. |
| 45 | 36.Providing and fixing 15mm dia C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms intoilets in sound working conditionetc., all as directed including all aterials, labour, tools, equipments, etc., complete. |
| 46 | 37.Preparing the existingsurfaces of ceilings and applying twocoats ofwhite washing with lime/lovelycem to give an even shade all as directed at site of work wherever requiredincluding all labour, materials, tools, brushes,tackles, equipments, scaffolding etc., complete. |
| 47 | 38.Preparing the surfaces of old external walls and painting with two coats of Acrylic Smooth exteriorpaint (asian or equivalent) to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. |
| 48 | 39.Preparing thesurfaces of old inner walls and applying two coats ofplastic emulsion paint (asian orequivalent) to give an even shade all as directed at site of work wherever required including all labour, materials, tools, brushes, tackles, equipments, scaffolding etc., complete |
| 49 | 40.Preparing the surfaces of new wooden members and painting with two coats of Deluxe Multi Surface Paint over a coat of primer (asian orequivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note: 1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 50 | 41.Preparing the surfaces of old wooden members and painting with two coats of synthetic enamel paint (asian orequivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note: 1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 51 | 42.Preparing the surfaces of new Steel members and painting with two coats of Deluxe multi surface paint over a coat of primer (asian orequivalent) of approved quality to give an even shade, all as directed at site of work including all materials, labour, scaffoldings, brushes, tools, equipments, etc., complete. Note: 1.Necessary painting co-efficient shall be allowed as per ChPA engineering manual. 2.The above quantity is inclusive of painting co-efficient. |
| 52 | 43.Re-filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. wherever required in layers not exceeding 200mm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m all asper direction of Engineer-in-charge and including all labour,tools, equipments, etc., complete. |
| 53 | 44.Loading, transporting, dumping and levelling the debris etc., within a lead of 2kms all as per relevant specifications and as directed including all labour, transport, tools, equipments, fuel, etc., complete. Note: 1. The tenderer shall maintain trip sheets in triplicate in Trust"s approved format at his own cost. 2.Payment will be based on the lorry cubical content. No deduction of voids for debris will be made. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
