Military Engineer Services-MES has published Tender For Up-Gradation Of Omq (P-12) & Smq (P-89) As Per Map-Ii Scale At Af Stn Bhowali. Submission Date for this Tender is 16-08-2023. Demolition Work Tenders in bhowali Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Jul-2023 | Amendement-01 | Other | 04-08-2023 |
| 2 | 04-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-08-2023 |
| 3 | 11-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-08-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of un reinforced concrete in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing rubbish to out side MOD land complete all as specified. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 3 | M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified and directed. |
| 4 | M & L for non skid coloured ceramic tiles (300x300mm)x7to 8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed. |
| 5 | M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer, complete all as specified and directed. |
| 6 | M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes etc in Cement Mortar 1:6 complete all as specified. |
| 7 | M&L non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed incoloured cement to match with jont free non-skid tiles, complete all as specified and directed. |
| 8 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting,complete all as specified and directed. |
| 9 | M&Lforof glazed ceramic coloured tiles joint free in vertical surfaces of size 450x300-350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed. |
| 10 | M&L Granite 18-20 mm thick (Jet black) work (table rubbed and polished) in steps, platforms andincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade Including rounding of edges exposed surface complete all as specified. |
| 11 | M&L for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed. |
| 12 | M&L for reinforced cement concrete M-15 type B1using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately) |
| 13 | TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 14 | S & F rolled mild steel Roof tubuler trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 15 | S&F MS steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 16 | S&F Galvanised, corrugated mild steel sheeting of thickness 0.63 mmwith two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 17 | M&L for rendering 15 mm thick plaster on fair faces of brick/concrete surfaces in CM (1:4)on wall surface, finished even and smooth without using extra cement, complete all as specified and directed. |
| 18 | M&L for rendering 10 mm thick plaster on other than fair faces of brick/concrete surfaces in CM (1:6)on wall surface, finished even and smooth without using extra cement ,complete all as specified and directed. |
| 19 | M&L for preparing newly plastered surfaces of walls and applying 2 coats of oil bound distemper emulsion including a coat of alkali resistant primer over 3mm thick wall care putty, complete all as specified and directed. |
| 20 | M&L for complete removal of existing treatment and applyingtwo coats of destemper oil emulsion including a coat of alkali resistant primer over 3mm thick wall care putty, complete all as specified and directed. |
| 21 | M&L for preparing the new plastered surfaces and applying two coats of cement base paint on walls all as specified and direcrted. |
| 22 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces etc complete as in sunken portion etccomplete as specified and directed. |
| 23 | M & L cement concrete type E2, 1:5:10 (40mm graded stone aggregate) as in filling and mass aggregate complete as specified and directed. |
| 24 | M&L for polythene film black 50micron thick, laid on a coat of bitumen primer @ 0.3-0.5 Kg/Sqm complete as specified and directed. |
| 25 | M&L 32 mm tubes medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floors as in spouts complete all as specified and directed. |
| 26 | M&L for rendering 5 mm thick plaster on other than fair faces of brick/concrete surfaces in CM (1:3)on ceiling surface, finished even and smooth without using extra cement, complete all as specified and directed. |
| 27 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 28 | M&L for preparing old plastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed. |
| 29 | Dismantling boarding, any description, fixed in any position with screws all complete all as specified and directed. |
| 30 | M&L for prepartion of old painted wooden surfaces exc. 10 cm width and applying one coat of synthetic enamel paint complete all as spd and directed. |
| 31 | S&F Providing Kitchen/cupboard cabinet with shutter complete in required sizes made out of 18 mm thick one side decorative lamination & other side white balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters and panels made out of 18 mm thick one side decorative laminated PVC sheet all brackets 5.5 mm screws etc. All the edges shall be covered with 2 mm thick PVC edge bonding tape of 90 degree edge bend finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge complete all as specified. |
| 32 | All same as per Sl No. 31 here-in-above, but both sides white lamination complete all as specified. |
| 33 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x4" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge |
| 34 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x6" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge |
| 35 | S&F stainless steel modern plain basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x8" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge |
| 36 | S&F stainless steel modern cup and saucer basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x4" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge |
| 37 | S&F stainless steel modern perforated cutlary basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x4" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge. |
| 38 | S&F stainless steel modern thali basket made up of surrounded by 5 mm dia and internal 3 mm dia stainless steel wire of size 18"x20"x8" complete all as described and as directed. Make: Arrow or equivalent make as approved by Engineer-in-charge. |
| 39 | S&F 60 cm long stainless steel telescopic channels for sliding modular kitchen racks. Make: Godrej or equivalent make as approved by Engineer-in-charge. |
| 40 | S&F stainless steel L hinges of required size for modular kitchen as approved by Eng-In-Charge based on sample kept in AGE(I) Office. |
| 41 | S&F stainless steel handles 100 mm long fabricated type, bright polished decorative type fixed with brass screws complete all specified. |
| 42 | S&F magnetic catcher complete all specified. |
| 43 | S&F vitreous china squitting pan Orrisa Pattern size 580x440 mm white with integral foot rest complete all as spd incluidng lime/ cement concrete bedding . |
| 44 | S & FPVC flushing cistern 10 ltrs capacity valve less symphonic action type low level complete with inlet valve handles incl brackets, chromium plate brass flush pipe 32 mm dia PVC connection and incl taking down old high level cistern comp all as specified. |
| 45 | S & F in repairs CP brass Soap dish, fixed to walls with chromium plated (CP) brass screws complete all as specified and driected. (Make : Cera, Cat No : F5006106) Or Equivalent as specified in PS . |
| 46 | S&F 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 47 | S&F in repairs 15 mm CP brass angle cock with wall flange, screwed for Iron Pipe or for brass ferrule complete all as specified and as directed.(Make : Cera, Cat No : F2008201) Or Equivalent as specified in PS . |
| 48 | S & F 15 mm bore single lever brass basin mixer, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.(Make : Cera, Cat No : F2008461) Or Equivalent as specified in PS . |
| 49 | S&F 15mm Bib Tap long nose with wall flange, chromium plated fancy type long shank screwed for Iron Pipe or for brass ferrule complete all as specified and as directed. |
| 50 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified. |
| 51 | S & F 15 mm Brass,Chromium plated over head shower 70 mm(2.5") dia with evolving joint and shower arm(suitable for dew range) including fixing tosteel pipe or union complete all as specified and directed. |
| 52 | S & F PVC connections 15mmdia , 450mm long, , withPTMT nuts& washers at both ends complete all as specified. |
| 53 | S & Fin repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges,complete all as specified and directed. |
| 54 | S & FVitreous China Ware Wash hand basin white, flat back, 550x400 mm sizeoval type in repairs including cutting for and pinning ends of brackets or erecting stand.(Make :Cera) Or Equivalent as specified in PS . |
| 55 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) and Wash down water closet (Pedestal pattern), complete all as specified and directed. |
| 56 | S&F CP brass two way bib taps with flange and aerator, screwed for Iron Pipe or for brass ferrule complete all as specified and as directed. (Make : Cera, Cat No : F2008162 or equivalent make as specified in PS) |
| 57 | S&F health faucet ABS body with wall hook and 1 mtr SS braided rubber hose pipe complete all as specified.(Make : Cera, Cat No : F8030301 or equivalent make as specified in PS)) |
| 58 | S & F 15 mm bore brass, chromiun plated, wall mixer (3 - in - 1) with arrangement for both telephonic shower and overhead shower with bend pipe, screwed down high pressure withlong screwed shanks and fly nuts, screwed for iron pipe.(Make : Cera, Cat No : F2008403or equivalent make as specified in PS) ) |
| 59 | S & F 15 mm bore brass, chromiun plated, sink mixer(wall mounted with 170 mm long swivel spout and wall flange,screwed down high pressure withlong screwed shanks and fly nuts, screwed for iron pipe.(Make : Cera, Cat No : F2008501 or equivalent make as specified in PS) |
| 60 | M&L for 75mm dia PVC floor trap, with grating including jointing with solvent cement complete all as directed and specified |
| 61 | S & F 75 mm bore PVC (SWR) bends of any radius with access door. |
| 62 | S&Ffor 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified. |
| 63 | S & F 110 mm bore PVC (SWR) bends of any radius with access door. |
| 64 | S&F 110 mm bore PVC (SWR) soil, waste, vent pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified. |
| 65 | Taking up or down15 mm bore Galvanised steel tubing and connections , including cleaning for refixing or removal to store, complete all as specified and as directed by Engineer - in - Charge. |
| 66 | Cutting chases, forwater tubing or concealed , etc, and making good to facings where required and plastering in cement mortar (1:4)cutting not exceeding 10cm girth in brick walls. |
| 67 | S&F 16 mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7-4(PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls,ceilings or laid in floor. |
| 68 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 69 | S&F plate rack of size (24"X36"X10") including fixing of screws complete all as specified. Make : Prayag, Cat No P-336 or equivalent make as specified in PS) |
| 70 | S&F25mm dia, stainless steel curtain rods including brackets and latto complete all as specified and as directed by Engineer-in charge. |
| 71 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete,(fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 72 | Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) etc complete all as specified and directed. |
| 73 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. |
| 74 | Taking down unserviceable sub main wiring with copper/aluminium conductor,PVC insulated,unsheathed cable of any size drawn through andincluding rigid PVC or PVC casing coping including earth wire complete all as specified anddirected. |
| 75 | Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy dutydrawn through and including in PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with,including steelbox of required module forfixing ofmodular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light/ fan/bell point controlled by one, one way switch complete all as specified and directed .Note : surface conduit shall be laid in ceiling portion only. |
| 76 | All as per Serial Item No. 75 above but for one light point controlled by two Nos. of, two way switches complete all as specified and as directed. |
| 77 | All as per Serial Item No.75 above but for one 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed. |
| 78 | All as per Serial Item No. 75 above but one 3 pin socket outlet 5 Amps on independent board complete all as specified and as directed. |
| 79 | All as per serial Item No.75 above but for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-strandedcopper conductor with 4.00 Sqmm PVC insulated FRLS multi-strandedcopper conductor as earth wire complete all as specified and directed . |
| 80 | Supply and Fixing Modular switch 1 way 6A, 1 module complete all as specified. |
| 81 | Supply and Fixing Modular switch 1 way16A, 1 module complete all as specified. |
| 82 | Supply and Fixing Modular switch 2 way 6A, 1 module complete all as specified. |
| 83 | Supply and Fixing Modular Bell push 6A, 1 module complete all as specified. |
| 84 | Supply and Fixing Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified. |
| 85 | Supply and Fixing Modular Socket, 6A/16A - 2/3 pin combined 2 module,complete all as specified. |
| 86 | Supply and Fixing Modular fan step regulator, 120W - 2 module complete all as specified. |
| 87 | Supply and Fixing Modular White cover plate with frame,2 module complete all as specified. |
| 88 | Supply and Fixing Modular White cover plate with frame,4 module complete all as specified. |
| 89 | Supply and Fixing Modular White cover plate with frame, 8-12 module complete all as specified. |
| 90 | Supply and fixing of Bell,multi music type, AC, 230 volts, single pole complete all as specified and as directed. |
| 91 | Submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLSPVC insulated multi-stranded copper conductor, single core cable colour Red,Black, and green conforming to IS 694 drawn through existing conduit and connected to common earth dollycomplete all as specified and directed. Note :- Three runs of 6 sqmm shall be measured as one length for the purpose of measurement. |
| 92 | supply and fixing of LED light fitting 1X10Wbulk head luminaries, with lamp holderswith all accessories including 10 W LED bulb including taking down old fitting complete all as specified and asdirectedMake :Havells /Bajaj/Wipro |
| 93 | supply and fixing of pride plus Inverter LED batten 20 Watt,6500 K, 230 Volt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours complete all as specified and directed by engineer-in-charge. make havells,cat part no LHEXACP7FN1W020 or equivalent in crompton/bajaj/wipro |
| 94 | supply and fixing of GLAMAX SMART BATTEN (Tuneable White) Glamax LED 20 W TW Smart Batten is designed meticulously to give you complete control over your home lighting. You could operate the batten using your Browse through the colour smartphone.options, alter the brightness and give your home the perfect ambience that fits your mood complete all as specified and as directed by engr in charge.make:- havells cat part No LHLDAMNDUA8R020 or Equivalent in bajaj/philips/wipro |
| 95 | Supply and fixing of E-Lite LED Pride Plus/nxt in a compact batten (57.5 cm), Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly,energy efficient ready to use pack and connectiong up with twin core twisted flexible copper conductor cable with suitable size taking down old fitting complete all as specified and asdirected Make :Havells cat part No LHEXAPP7UN1W020 or Equivalent in /Bajaj /Wipro/philips. |
| 96 | LEDbulb of 10 watt with 6500K colour temp, infittingcomplete all as specified and asdirected Make :Havells / Bajaj /Wipro |
| 97 | Ceiling rose, surface bakelite, 65 x 50 mm, three terminals, 230 Volts complete all as specified and as directed. |
| 98 | Factory made distribution board in sheet metal enclosure in double door with 200A ratedbus bar,SPN 8 way, 240V for fixing MCB"s complete all as specified and as directed. |
| 99 | Factory made distribution board in sheet metal enclosure in double door with 200A ratedbus bar,TPN 4 way, 240V for fixing MCB"s complete all as specified and as directed. |
| 100 | MCB SPN ‘C’ Curve 10KA, 40 amps complete all as specified and directed . |
| 101 | MCB SP ‘C’ Curve 10KA, 5 to 32 amps complete all as specified and directed . |
| 102 | MCB TPN ‘C’ Curve 10KA, 63 amps, 415V complete all as specified and directed . |
| 103 | Blankig plate for filling gap of MCB complete all as specified and directed. |
| 104 | Modular type Blankig plate for filling gap for switch/socket complete all as specified and directed. |
| 105 | Lamp Holder, insulated body with back plate, 230 Volts for batten fittings including taking down old one complete all as specified and as directed. |
| 106 | M&L for making opening/hole suitable for fixing exhaust fan 300 mm sweep including plastering finishing and making good the existing surface. |
| 107 | Supply and fixing ceiling fans against BER complete with blades, down rods, electronicregulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and asdirected. |
| 108 | Supply and fix exhaust fan against BER made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300m complete all as specified. |
| 109 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket modular type complete with one single pole MCB 20Amps Complete all as specified |
| 110 | Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in groundpreferably vertically in ground with top edge not less than 1.25 mtr deep below normal ground level connected with and including galvanised iron wire 4 mm dia as earthing lead by means of nuts bolts and washers of galvanized iron protected by 15mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe , including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size, charcoal and salt in alternate layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing on completioncomplete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
