|
| 1 | Dismantling the existing damaged brick/stone masonary in cement mortar wall including clearing away from site etc., complete |
| 2 | Dismantling the existing RCC Roof Slab including clearing away from site etc., complete |
| 3 | Earth work Narrow excavation for foundationinordinary soil with initial lead and lift etc., complete |
| 4 | Narrow Excavation |
| 5 | Supplying and filling with M.sand in layers of not more than15cm thick including watering and ramming to consolidation etc., complete |
| 6 | Plain cement concrete 1:5:10 mix using 40mm ISS gauge HBBG metal for foundation and flooring including curing dewatering and all other labour charges etc., complete |
| 7 | Providing steel centering and shuttering with strutting arrangements for sides and soffits etc., complete |
| 8 | without strutting |
| 9 | for column |
| 10 | with strutting |
| 11 | Supplying cutting, bending & tying in position of MS / RTS grills for RCC works including cost of steel & binding wire etc., complete. |
| 12 | Reinforced cement concrete 1:1.5:3 mix (one cement one and half M.sand & Three 20mm metal) using 20mm ISS gauge HBBG metal including cost of all materials and labour charge but excluding cost of reinforcement and binding wire etc., complete. |
| 13 | for foundation and basement |
| 14 | for superstructure |
| 15 | Brick work in cement mortar 1:5 (one cement and five sand) mix using country bricks of standard size 8 ¾” x 4 ¼” x 2 ¾ ”etc., complete. |
| 16 | for foundation and basement |
| 17 | for superstructure |
| 18 | Supplying and fixing of MS grill gate using suitable MS L angle flats including cost of material and labour charges for welding, cutting and fixing and also one coat of red oxide primer etc., complete |
| 19 | Weathering course with concrete broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaten with wooden beaters giving to required slope and thicknessetc., complete |
| 20 | Finishing the top with one course of pressed tiles of size 20cm x 20cm x 20mm size laid in cm 1:3 mix mixed with water proofing compound as per Indian standard 2% by weith of cement used and pointed with the same mortar etc., complete |
| 21 | Special Ceiling Plastering 1:3 mix 10mmtk etc., complete |
| 22 | Plastering with CM 1:5 mix 12mm thick etc., complete |
| 23 | Supplying and fixing in position of 20 BWG GI plain sheet shutter door of size 70 x 160 cm framed with alround MS angle iron of size 30 x 30 x 5mm with one ledge and two braces made out of MS flat 30 x 5mm size without door frame but with necessary gudjin pins and locking arrangements on both sides complete.The 20 BWG GI plain sheet should cover the MS angle frame alround in such a way that there would not be any exposition of the angles to avoid any rusting.The fastening of the GI sheet with the angle iron frame must be with aluminium rivets at 25cm C/C.The entire shutter door must be painted with one coat of red oxide paint and the shutter properly fixed in position etc., complete - Each |
| 24 | Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete1:4:8 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers. |
| 25 | Supply and fixing in position of European water closet with \"S\" (or) \"P\" trap of approved color and quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with standard specification including supply and fixing in position of 10litre capacity glazed porcelain low level flushing tank on wall including 2 Nos of 15mm & brass nipple, 15mm dia PVC brass connection, 15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection etc., complete complying with standard specification |
| 26 | Supplying and fixing in position best quality approved make white glazed earthen ware wash hand basin size 550mm x 400mm with a pair of cast iron brackets including cost of15mm F brasschromium plated pillartap, 32mm F C.P. waste, 32mm F PVCwastepipe with rubber plugs and chain, 15mm FG.M. Wheel valve 15mm F brass nipple, 15mm F Nylon connectionsetc. Including fixing the wash hand basin in the wall in position with a pair of C.I. Brackets with teak wood plugs and screws and giving necessary water supply connection and paintingthe brackets with two coats of paint over a priming coat of anticorrosive paint including testingfor leakage etc. complete as per standardspecifications. |
| 27 | Dadooing the skirting the wall with white (or) colour glazed tiles of tiles of size 15cm x 15cm x 6mm laid in cement mortar 1:2 mix – 10mm tk. and pointing with white cement using 0.40kg. /m2 including finishing the joint and pointing flush with tiles surface etc., complete. |
| 28 | Flooring with ceramic tiles of size 305 x 305 x 6mm of approved colour and qualityin cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly etc.complete. |
| 29 | Construction of inspection chamber of size 1’ 1 ½” x 1’ 1 ½” as per T.P.No.18/1944 and of the description the foundation of the inspection chamber to be cement concrete 1:5:10 mix using 40mm metal and brick work in cement mortar 1:5 mix using country bricks and plastering with cement mortar 1:4 mix 12mm tk as per std. specification. |
| 30 | RCC 1:2:4mix using 50mm ISS gauge HBBG chips for pre cast slab of 50mm thickness excluding cost of reinforcement grills in position but including moulding, casting, finishing and fixing in position etc., complete |
| 31 | RCC 1:2:4mix using 50mm ISS gauge HBBG chips for Jally of 50mm thickness excluding cost of reinforcement grills in position but including moulding, casting, finishing and fixing in position etc., complete |
| 32 | Supply and fixing of following water supply materials at site with best quality etc.,complete |
| 33 | 32 mm dia UPVC Internal Concealed |
| 34 | 25 mm dia UPVC Internal Concealed |
| 35 | 20 mm dia UPVC Internal Concealed |
| 36 | Supply and fixing of following water supply GI specials at site with best quality etc.,complete |
| 37 | 32 mm dia UPVC Coupler |
| 38 | 25 mm dia UPVC Coupler |
| 39 | 20 mm dia UPVC Coupler |
| 40 | 32 mm dia UPVC Elbow |
| 41 | 25 mm dia UPVC Elbow |
| 42 | 20 mm dia UPVC Elbow |
| 43 | 32 mm dia UPVC Tee |
| 44 | 25 mm dia UPVC Tee |
| 45 | 32 mm dia GM Gatevalve |
| 46 | 25 mm dia GM Gatevalve |
| 47 | 32 mm dia UPVC Union |
| 48 | 25 mm dia UPVC Union |
| 49 | PVC Screw Down Tap |
| 50 | 110mm Dia PVC Pipe -6KSC |
| 51 | 110 mm dia PVC Elbow |
| 52 | 110 mm dia PVC tee(mould) |
| 53 | Supply of PVC tank at site etc.complete. |
| 54 | UPVC Adhesive |
| 55 | Conveyance of 110 mm diaPVC rigid pipes to proper grading and alignment jointing with pre cement paste and testing to the required pressure etc., complete. |
| 56 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for concealed PVC light / fan point (for elctronic regulator) SD-24. |
| 57 | Wiring with 2X 1.5 sqmm (22/0.3) PVC insulated Sc unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5A 3 pin non inter locking CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point ( SD-38) |
| 58 | Supply and fixing of 20w 4 Feet LED Fittings with LED Higher End Etc.Complete |
| 59 | Supply and fixing of LED INDOOR FITTINGS (LIGHT EMITTING DIODE)-18W LED 3000K Fitting with LED Higher End Philips / Havells / Equivalent |
| 60 | Supply and Laying of 2core 6sqmm Cable on wall with MS Clamps(SD-215) |
| 61 | Supply and run of 2 of 4Sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD-65. |
| 62 | Supply and run of 2 of 4Sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V in 20mm dia GI pipe with suitable bend on both endfor service connection mains SD-70. |
| 63 | White washing two coats with best sheel lime etc..complete. |
| 64 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete |
| 65 | Painting with best synthetic enamel paint of approved Colour and high quality with two coats to new iron work etc. complete. |
| 66 | Supply and Fixing of 110mm diaRain water Down fall pipeincluding cost of material ,shoe ,bond,brackets teakwood plugs etc..cpmplete. |
| 67 | Supplying and fixing in position Indian make bewelled edge mirror of approved quality and brand PVC / Fibre Glass framed of size 600mm x 450mm x 5.5mm with necessary plastic back PVC frame with bottom stand of approved colour with brass screws, Rawal plugs etc., complete as per standard specifications. |
| 68 | Supply and fixing of best approved quality chromium plated Towel rail 600mm Long and20mm dia with all material and labour cost for fixing etc., complete. |
