Fertilisers And Chemicals Travancore Limited has published Tender For Revamping Of Ambalamedu School Building For Providing Non Managerial Club House At Fact (Cochin Division) Township At Ambalamedu, Ernakulam.. Submission Date for this Tender is 31-07-2023. Building Work Tenders in cochin Kerala. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 24-Jul-2023 | TECHNICAL CORRIGENDUM | Technical Bid | 31-07-2023 |
Sl. No. | Item Description |
1 | Removal of all kinds of materials such as benches, desk, tables, almirah, furniture etc. of all kinds/ material from all rooms of the building prior to revamping works( maximum lead 25m) to the designated location. |
2 | Dismantling and removing the MP tiles /PWD tiles over the roof including ridges, hips, valley sheets, wind tiles and board ridges but excluding roof timber and stacking materials as per deptl.instructions. |
3 | Dismantling and removing wrought and framed timber roof and floor and stacking materials as per deptl.instructions. |
4 | Labour charges for dismantling carefully the existingceiling /partitions with AC sheets, Plywood / Hardboard /woodetc and stacking them for reuse as per deptl.instructions. |
5 | Chipping & removing mosaic flooring / skirting/ slate or blackboards in walls in the toilet rooms and other areas very carefully without damaging the remaining portions and water supply items and removing the debris to places pointed out by the department. |
6 | Dismantling existing old sanittary fittings like wash basin, EWC, Urinal etc and removing all internal water lines and waste lines carefully without damaging the building as instructed at site from 2 toilet blocks |
7 | Chipping & removing old cement plastered surface including racking out joints & clearing the surface for replastering & disposal of the debris as per directions within a distance of 150 m. |
8 | Chipping & removing portions of existing RCC works carefully without damaging the remaining structure & removing the debris as per directions within a distance of 150 m. |
9 | Dismantling and clearing away any thickness of rubble, brick, laterite in CM including disposal of debris as per directions within a distance of 150 m. |
10 | Dismantling CC/RCC works including separately removing & stacking available reinforcement & clearing away the debris as per directions within a distance of 150 m. |
11 | Dismantling carefully the existing RCC jalley ofsize 500x250 mm without any damage to remaining building components. |
12 | Dismantling and removing doors with or without ventilators including removal of shutters, hinges, holdfast and all other fittings and stacking materials as per deptl.instructions |
13 | Dismantling and removing windows/ventilators/shelves/cup boards/AC frames etc including removal of shutters, hinges, holdfasts and all other fittings and stacking materials as per deptl.instructions |
14 | Taking down shutters of doors, windows and ventilators including removal of hinges and all other fittings and stacking as per deptl.instructions |
15 | Dismantling steel work manually/ by mechanical means in built up sections (collapsible grill/gate etc.)without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.(Measurements will be based on actual weight taken at FACT"s weigh bridge if required by Engineer-in-Charge). |
16 | Supplying and fixing Thambakam wood reepers in position for roofing work including cost of suitable wire nails etc. complete at all levels |
17 | Supplying 1st class and well-seasoned Thambakam wood scantling at site in required dimensions as per deptl.instructions. |
18 | Labour for woodwork in wrought and put up with deptl.materials. |
19 | Supply, fabrication and fixing of steel structures made with M.S. hollow tubular sectionsofTATA /JINDAL ofdifferent sectionswithinsert plates,legsetc. and blinding the hollow tubes with MS plates etc. at all heights with necessary welding ,scaffoldiing and painting with twocoats of zinc chromate yellow metalprimer and twocoats of synthetic enamel paint with all labour and material charges etc. complete |
20 | Supplying and providing Aluminium coloured roofing sheets "Tiled Profile" of"Hindalco everlast " or equivalent makeat all levels with minimum thickness of 0.5mm,with suitableanticorrossive corroshield selftapping scews, washers, overlaps of sheets with adequate sealing arrangements including cuttingsheets torequiredshape/length and fixing withself tapping screws ofrequired diameter and length, etc.as per manufacturer’s specifications. |
21 | Supplying and providingcolour coated Zincalume steel sheetsat all levels with minimum yield stress of 550 Mpa and having 0.45mm base metal thickness and a hot dip zinc aluminium alloy coating( consist of 43.5% zinc, 1.5% silicon and 55% aluminium with total coating mass of 150 gm/Sqm). The total colour coating thickness of 40 micronswith silicon modified polyester paint system shall be of 20 microns coat on exterior surface and 10 microns on under side of sheet over 5 microns primer coat on both sides Total thickness of coated sheet to be0.5mm. Roofing sheet shall be crest fixed to the purlins with Hot dip galvanized self drilling fasteners of required diameter and length with integral EPDM washers as per manufacturer’s specifications. Fasteners also to be provided on the side laps of sheet. Minimum sheet overlap at end laps shall be 150mm- For Roofing/cladding/louver |
22 | Providing colour coated Zincalume steel ridgecapping with hooksorbolts and nuts,and EPDM washers etc.complete.as per manufacturer’s specifications |
23 | Supplying and fixing10 mm or suitable dia Anchor bolts at all heights for fixing sunshade brackets including cost of bolt,drilling charges,scaffolding charges if required etc complete as per instructions |
24 | Plain Cement Concretework in 1:2:4 nominal mix using 20 mm and downgrade hard granite broken stone including all charges for mixing concrete, laying, consolidating, curing etc.complete at all levels,excluding cost of cement |
25 | RCC work in 1:1½:3 nominal mix using 20 mm and downgrade hard granite broken stone including all charges for mixing concrete, laying, consolidating, curing etc.complete but excluding cost of form work & reinforcement works- For foundation footings, bottom & sides of trenches, equipment foundations, plinth beams, lintels, slabs, columns & beams etc.up to 15 m from ground level. |
26 | Centering and shuttering including strutting, propping etc. and removal of form Lintels, beams, plinth beams, girders, bressumers and cantilevers |
27 | Providing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete with Thermo-Mechanically Treated bars of grade Fe-500D (TMT bars) including cost of reinforcement steel |
28 | Cement block masonry work in CM 1:6 using good quality, approved cement blocks including charges for conveying, scaffolding charges etc. as per departmental instructions for super structure walls up to 5 m height from ground level/floor level, excluding cost of cement |
29 | Cement plastering with CM 1:4,12 mm thick one coat floated hard and trowelled smooth at all levels,excluding cost of cement |
30 | Charges forplastering with neat cement flushing coat over the base plastering,excluding cost of cement |
31 | Roofing with first class MP roofing tiles 340 mm nominal size over rafter and reaper already provided (Using deptl. MP tiles). |
32 | Painting one coat of roof tile paint asian paints apex tile guard or equivalent on MP tiles afterthoroughly cleaning the surface including all cost of materials, labour etc. |
33 | Resetting the existing M.P. hip and ridge tiles in surki mortar 1:½:1½ (or relaying)including finishing the edges at all heights |
34 | Providing surki mortar 1:½:1½ to the existing ridge, hip tiles and valley gutters including finishing the edges. |
35 | Surki mortar bordering to tiled roof about 65 Sq.cm. in section including adding cement at all heights as per deptl.instructions. |
36 | Valleying with 22 Guage Aluminium sheets , 900mm wide with an overlap of 150 mm at joints including nailing with stainless steel nails of required length to the roof members as valley gutters at all heights including necessary scaffolding etc complete. |
37 | Ceiling with 4 mmnonAC plain sheets “E” board of Everest or equivalent screwed on to the underside of frame work already provided including necessary SS screws, wire nails & cost of all materials & scaffolding charges etc. complete as per deptl. instructions. |
38 | Supplying and fixing Anjili wood planed and framed work in position to the lines and levels etc. complete as per deptl. instructions. |
39 | Providing, fabricating & fixing in position to the door frame already provided, first class well seasoned Anjili wood single leaf/double leaf fully paneled shutters with 150 x 35 mm bottom & lock frames, all other frames 100 x 35 mm & 18 mm thick panel planks including all labour charges for fixing all hardware but excluding cost of hardware etc.complete. |
40 | Providing & Fixing in position fully glazed shutters (top or center hung) in first class well seasoned Anjiliwood & 3 mm thick plain glass to suit the ventilator frames already provided with 70 x 30 mm frames and 20 x 12 mm teakwood beadings & brass wire nails including all charges for fixing hardware but excluding cost of hardware etc.complete. |
41 | Providing 3 mm thick plain glass for glazed shutters, partition etc with wooden fillet, putty etc. including dismantling broken glass etc. |
42 | Providing and fixing PVC door of syntex or equivalant make withshutter frame made of extruded plastic section having dimension of 60 x 24 mm or nearest, paneling with single panelhollow plastic section of20 mm thick withaverage wall thickness of 1 mmand outer frame of door made of extruded plastic section of 48 x 40 mm or nearestincluding providing and fixing all required fittings such as stainless steel butt hinges, PVC tower bolts, PVC handles etc.complete as per manufacturers specifications. |
43 | Providing guard bars to windows & ventilators using suitable size M.S. rods using contractor’s own MS bars |
44 | Providing and laying with approved brandrectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in suitable colours laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
45 | Providing and fixing first quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-Charge for dadoing to walls over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
46 | SupplyingandfixingPVC floortrap (single or multy type) of approved brand 110 mm size with requiredprovision ofoutlets and inlets as per manufacturers specifications, cutting and making good the walls and floors, etc. complete. |
47 | Supplying and fixing 125 mm (5 inch) Stainless steel floor gratings (two piece) to PVC trap as per instructions at site |
48 | Supplying and fixing approved qualitywhite glazed vitreous china flat back lipped front urinal of size 430x380x230 mm or nearest sizewith 1No. 15mm PVC heavy type connection and 1 No.15mm CP regulating valve of superior make ,CP spreader with flush pipefixing the urinal to wall with Stainless steel screws with plastic grips including cutting and making good the walls etc. complete as per deptl instructions. |
49 | Supplying and fixing urinalpartitionwith "flair Division plate" of Johnsonwhite colour or equivalent |
50 | Supplying conveying and fitting 550x400mm or nearest size wash hand basin of white glazed vitreous china approved quality with a pair of special alloy bolts for fixing the basin on walls with 1 No. 15 mm heavy type CP brass pillar tap of approved make 1no.heavy type 15mmPVC connection and 1No.15 mm CP regulating valve of superior make ,1No. 15 mmCP waste coupling,32 mm PVC waste pipe with cp learning nut 1No. etc. including cutting and making goodthe walls,etc. complete. |
51 | Supplying and fixing at all levels approved quality /brand European type vitreous china white glazed water closet pan with P/S trap and White/Black duro plastic seat and lid with CP brass hinges and CP rubber buffers, 10 litre capacity PVC low level flushing cisternof approved makewith all fittings 1No.32mm CP brass flush bend, 1No:15mm superior PVC connection heavy type ,15mm CP regulating valve,cutting and making good the walls and floorsincluding giving connection to sewer pipe with all necessary specials,etc. complete as per direction at site |
52 | Supplyingto civil storewhite glazed Orisa pan of (Hindustan ,Cera or equivalent) 580x440mm size with P/S trap includingall necessary specials,etc. |
53 | Supplying to civil store PVC high level flushing cistern of 10 Ltr. Capacity of approved make and quality with all required arrangements viz, 1 No. 32 mm PVC flush pipe with learning nut, 1 No. 15 mm superior make 15 mm GM float valve & inlet connection etc.complete. (of make CERA,JOHNSON,KHAJARIA or equivalent) |
54 | Charges for fixing deptl. Orissa Pan/IWC / EWC pan, wash hand basin,Sink etc. (Supplied by the Company) with accessories, making good surface to the existing finished levels etc. as per deptl.instructions. |
55 | SupplyingConcealed Stop cock ¾ inch "CERA/ JOHNSON/ PARRYWARE or equivalent type |
56 | SupplyingAngle valve with wall flange of standard range (CERA,JOHNSON or equivalent) |
57 | SupplyingLong body bib cock ofstandard range CERA/JOHNSON or equivalent type |
58 | Supplying to Civil store100 mm CP brass shower rose with 15 mm / 20 mm inlet and of approved brand / manufacturer |
59 | Supplying 600x 450 mm ornearestsize bevelled edge mirrorof approvedqualitysuperiormake " with hard board or plastic sheeton the rear and fixingthesame in positionwithnecessary plugs& SS screws etc complete |
60 | Suppling and fixing 600 x20 mm or nearestStainless steelheavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete |
61 | SupplyingHealth faucets of standard range approvedby Engineer-in-Charge (CERA,JOHNSON or equivalent brand) |
62 | Supplying and fixing best quality SS soap dish including cost of screws, wooden plugs etc. |
63 | Supplying to civil store 110 mm OD PVC pipehaving 4 Kg/cm2 pressure rating as per IS 4985 - Class II |
64 | Supplying to civil store63 mm OD PVC pipes having 10 Kg/cm2 pressure rating as per IS 4985 Class-V |
65 | Supplying to civil store50 mm OD PVC pipes having 6 Kg/cm2 pressure rating as per IS 4985 Class-III |
66 | Supplying, laying and jointing with solvent cement, Rigid PVC pipes conforming to IS 4985 Class V (10 Kg/cm2 pressure rating) for water lines with all required concealed (brass embeded) PVC specials, such as Tees, bends, elbow, union, reducer etc. with clamps if any including necessary cutting and making good the walls, earth work if required etc.complete -25 mm OD Pipe |
67 | Earth work excavation in all classes of soil including narrickal but excluding hard rock which require blasting including back filling in basement & sides of foundation, depositing on bank within an initial lead of 50 m including breaking clods, watering, ramming and sectioning of spoil bank etc.complete- Up to 1.5 m depth from ground level. |
68 | Felling trees of the girth ( measured at a height of 1m above ground level ) including uprooting,cutting of trunks and branchesand stacking of serviceable material and disposal of unserviceable material -Beyond 30 cm girth up to and including 60 cm girth |
69 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. |
70 | Painting one priming coat with approved quality wood primer on wood work after rubbing with sand paper and cleaning all the surface including all cost of materials labour etc. |
71 | Cleaning thestructural/other surface neatlyat all heights, manually with suitable tools or with high pressure water jet spray (using suitable mechanical means), and scraping if required, to remove the whole accumulateddust, rust, dirt etcas per departmental instructions. |
72 | Painting one priming coat on new/old iron work at all heights with approved quality zinc chromate yellow metal primer of approved brand & quality at all heights including cost of primer and materials, labour, scaffolding charges, cleaning the site etc. as per departmental instructions |
73 | Painting with synthetic enamel paint using approved quality paint as specified one coat (over a priming coat already done and paid separately) for wood work/iron work after cleaning the surface including cost of all materials and labour. |
74 | Painting with synthetic enamel paint for each succeeding coat for woodwork/ ironwork including cost of all materials and labour. |
75 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
76 | Painting one coat of priming coat on plastered surface (interior)with approved quality cement primer after cleaning the surface including all cost of materials, labour etc. |
77 | Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well. |
78 | Painting with one coat ofapproved quality exterior primer to walls after neatly cleaning the surface by removing loose paint, dirt etc.by cleaning with water, scrapping etc. at all heights including cost of all materials, labour charges, scaffolding charges etc.complete as per instructions. |
79 | Painting with one coat ofexternal emulsion of approved quality and colour over the priming coat already done and paid separately after cleaning with cotton waste including cost of all materials, labour charges, scaffolding charges etc complete at all heights as per departmental instructions |
80 | Painting with one coat to old surface/succeeding coat ofexternal emulsion of approved quality and colour after cleaning with cotton waste including cost of all materials, labour charges, scaffolding charges etc complete at all heights as per departmental instructions |
81 | Polishing of old wooden furnitures ,surface of cup boards, doors/ windows etc at all heights by (1) cleaning the old surface well after removing the old polished surface by scratching, sand papering to get smooth finish and applying "Esdee" filler or "Sleek N.C. Wood Filler - Clear" for filling voids(2) Applying wood sealer of "Sleek Euro Clear Sealer - PU HS " of M/s. HBC ,2 coats(3) Applying 2 coats of polish "Sleek Euro Topcoat Clear Glossy - PU " of M/s.HBC or equivalent to obtain smooth finish. |
82 | Providing cup board shutters with approved quality wooden series Aluminium profiles having show case frame of size 66x32.5x0.83 mm,shutter frame of size 41.90x23x0.98 mm, Intermediate frame of size 32x32x0.80 mm (if required) having necessary shutters & partitions (If required) as per requirement, covered with 3 mm hylam sheet inclusive of SS Handles, 75 mm SS hinges, Magnetic latches , necessary cleat angles,rubber beedings & corners with all fixtures in SS screws etc complete as per directions at site |
83 | Supplyingstainless steel butt hinges 125 mmto department . |
84 | Supplying at site Stainless steel tower bolt ,200 mm long |
85 | Supplying12 mm dia 300 mm long stainless steel Aldrop with all fixtures. |
86 | Supplying to Civil storePad Lock 50 mm “Godrej Navatal “ with duplicate keys |
87 | Supplying & fixing flat iron hold fasts suitable to doors, windows ventilators etc. with necessary SS screws for fixing. |
88 | Supplyingstainless steel butt hinges 75 mmto department |
89 | Supplying stainless steelhooks & eyes, 100 mm to department |
90 | Supplying stainless steelhooks & eyes, 150 mm to department. |
91 | Supply of Stain less steel screws suitable gauge, 25 mm in length |
92 | Providingand fixing SS door handle 150 mm with SS screws etc. complete |
93 | Supplying to civil storeball valveforged "ZOLOTO"or equivalent brand, 50 mm size |
94 | Supplying to civil storeball valveforged "ZOLOTO"or equivalent brand, 25 mm size |
95 | Providing labour assistance for emergency works which are not covered in the Schedule of work-Man Mazdoor |
96 | Providing Plumber for waterline repair works for normal and odd hours (for 8 hour duty) |
97 | Providing labour assistance for emergency works which are not covered in the Schedule of work- Skilled labour like Mason,Carpenter etc. |
98 | Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. |
99 | Local application of chemical insecticides of brands specified in IS-6313 for anti- termite treatment of the interior portion of building like cup boards , walls, roof ceiling, other woodworks etc(Payment is for per Sq.m area of area applied) |
100 | Providing and fixing in position collapsible steel shutters with vertical channelsbraced with flat iron diagonalswith top and bottom rail of T-iron complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, as per IS 10521 spec or design as approved by Engineer-in-Charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail