Artificial Limbs Manufacturing Corporation Of India-ALIMCO has published Tender For Insourcing Wheel Assemblies Of Tricycles, Wheelchairs And Mtc And Cutting And Bending Of Ms Al.Tubes And Final Axilla Assembly And Drilling Holes And Csk Assembly Work (As Per Drawing). Submission Date for this Tender is 31-07-2023. Rolling Hardware Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Frame Assy. (As per drawing) |
2 | Sub Assy. work of Tricycle (TD2C95/96) As per drawing |
3 | Wheelchair Frame Size-II Final Assy. Work of Outsourced Sub Assembled Wheelchair Frame Size-II (TD2C51AZ0) As per drawing |
4 | Wheel Assemblies : Bicycle Front Wheel Assy. Size 28"x 1 ½" with 32Holes. Mounting of tyre & Tube using tape on wheel. |
5 | Bicycle Rear Wheel Assy. Size 28"x1 ½", 40Holes.Mounting of tyre & Tube using tape on wheel |
6 | Front wheel Assy Size 28’’x 1½ “, 32Holes. Assembly of Rim, Spoke, Nipple, Washer and Hub and Trueing of wheel (As per drawing) |
7 | Rear wheel Assy Size 28’’x 1 ½”, 40 Hole. Assembly of Rim, Spoke, Nipple, Washer and Hub and Trueing of wheel (As per drawing) |
8 | Bicycle Front wheel Assy Size 20"x 1 3/8" ,20 Holes. Mounting of tyre & Tube using tape on wheel |
9 | Rear wheel Assy Size 24"x 1 ½", 40 Holes. Mounting of tyre & Tube using tape on wheel |
10 | Rear wheel Assy Size 24" x1 ½", 32 Holes. (i) Punching of 8 Holes & Fixing of 4 Brackets (TD2A06JB2) with rivets on Rim Size 24" x1½". (ii) Assembly of Rim, Spoke, Nipple, Washer and Hub and Trueing of wheel. As per drawing. |
11 | Rear wheel Assy Size 20" x 1 ½", 20 Holes. (i) Drilling of 8 Holes & Fixing of 4 Brackets (TD2A06JB2) with rivets on Rim Size 20" x1½". As per drawing. (ii) Assembly of Rim, Spoke, Nipple, Washer and Hub and Trueing of wheel (As per drawing) |
12 | Wheel Assy. with Push Rim |
13 | Rear Wheel Assy. (R) As per drawing |
14 | Rear Wheel Assy. (L) As per drawing |
15 | Front Wheel Assy. As per drawing |
16 | Cutting of MS Tube (As per drawing) |
17 | (i) Length upto 0.75 Mtr. |
18 | (ii) Length between 0.75 to 1.5 Mtr. |
19 | (iii) Length more than 1.5 Mtr. |
20 | Cutting of Aluminium Tube (As per drawing) |
21 | (i) Length upto 0.75 Mtr. |
22 | (ii) Length between 0.75 to 1.5 Mtr. |
23 | Bending of MS Tubes |
24 | (i) Length up to 1.25Mtr. (Single Bend) |
25 | (ii) Length between 0.75 to 1.5 Mtr. |
26 | (iii) Length up to 2.5 Mtr. (Two Bend) |
27 | (iv) Length more than 2.25 Mtr. (Six Bend) |
28 | (v) Length up to 2.5 Mtr. (Four Bend) |
29 | Final Assembly of Axilla Crutch (As per drawing) |
30 | Drilling holes & CSK on Almunium Tubes Works (As per drawing) |
31 | Drilling holes & CSK on Al. Extension Tube of Axilla Crutch (As per drawing) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail