Urban Development Department-UDD has published Tender For Redevelopment Of Office Hall, At 3Rd Floor Of Dmm Library, Shakshi, Jamshedpur. Submission Date for this Tender is 20-07-2023. Building Work Tenders in jamshedpur Jharkhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | PART-01 Partition work |
2 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
3 | For fixed portion |
4 | Power Coated Aluminium (minimum thickness of power coating 50 micron) |
5 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
6 | Power Coated Aluminium (minimum thickness of power coating 50 micron) |
7 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
8 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
9 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
10 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
11 | PART-02 Painting work |
12 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
13 | Providing two coat of Plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone of fine sand paper, applying putty wherever required, scaffolding do--- |
14 | PART-03 Sanitary/Plumbing |
15 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
16 | Kitchen sink with drain board |
17 | 510x1040 mm bowl depth 250 mm |
18 | Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms |
19 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
20 | Granite of any colour and shade |
21 | Area of slab over 0.50 sqm |
22 | PART-04 Flase ceiling |
23 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : |
24 | 12.5 mm thick tapered edge gypsum moisture resistant board |
25 | PART-05 STORAGE |
26 | Providing ply wood partition upto 2.5M height with 4mm thick commercial ply wood of standard make fitted and fixed both sides over sal wood frame of 50x50mm posts at 122cm centres and 3 nos 50 x 50mm horizontal members inclduing cost of anchoring the partition to floors and walls properly and providing 2 coats of synthetic enamel paint over a coat of priming of approved shade and make and leaving space for doors if necessary all complete as per drawing specification and direciton of E/l. (4 mm thick ply) |
27 | Particle Board 12 mm thick |
28 | Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
29 | Float glass panes |
30 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
31 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked |
32 | PART -06 CURTAIN & Other Items |
33 | Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. |
34 | 25 mm diameter. |
35 | Part-06 (ELECTRICAL WORK) (Make- Havels, Anchor, Coulamb.) |
36 | S/F PVC conduit- supplying & fixing of following sizes of PVC conduit with accessories in surface / recess including cutting the wall & making good the same in case of recessed conduit as required |
37 | 25 mm |
38 | 40 mm |
39 | Point wiring in PVC conduit , with modular type switch- wiring for light point fan point / exhaust fan point / call bell point with 1.5 sq mm FR PVC insulated CU conductor single core in surface / recessed PVC conduit modular switch with modular plate , phenolic laminted sheet with suitable size PVC/ MS box as required. |
40 | Group C |
41 | Circuit sub-main wiring in PVC conduit - wiring for circuit / sub main wiring along with earth wire with following size of FR PVC insulated CU conductor single core cable in surface / recessed PVC conduit as required |
42 | 2x1.5 sq mm+ 1x1.5 sq mm earth wire |
43 | 2x2.5 sq mm+ 1x2.5 sq mm earth wire |
44 | 2x4 sq mm+ 1x4 sq mm earth wire |
45 | Supply & fixing of following sizes or modules of GI boxes |
46 | 1 or 2 module |
47 | 4 or 5 module |
48 | 6 module |
49 | Modular base & cover plate for modular switches |
50 | 1 or 2 module |
51 | 4 or 5 module |
52 | 6 module |
53 | S/F modular type switch socket- supply fixing of following modular switch socket on the existing mosular plate & switch box including coonections but excluding modular plate etc as required |
54 | 5/6 amps 1 way switch |
55 | 15/16 amps 1 way switch |
56 | 5/6 amps 3 pin socket outlet |
57 | 15/16 amps 6pin socket outlet |
58 | S/F modular type blanking plate- supply fixing of following modular blanking plate on the existing modular plate & switch box including coonections but excluding modular plate etc as required |
59 | S/F ceiling rose- supply & fixing 2 pin 5 amps ceiling rise on the existing junction box or wooden block including coonection etc as required |
60 | Pedastal fan with adjustable height, inbuild speed regulator,560mm |
61 | SITC of 16" 400 mm wall fan |
62 | 20/22 W LED tube light |
63 | 2"X2" LED panel light (36 W) |
64 | Supplying & Fixing following way horizointal type 3pole & neutral, Sheet metal MCB distribution board, 415V, on surface/recess, complete with tinned cu busbar, neutral busbar, reath bar, interconnections, powder painted including earthing ect as required (but without MCB/RCCB/isolator) |
65 | 6way( 4+18) Double Door Horizointal type |
66 | Supplying & Fixing 8way(8+24)way Vertical type 3pole & neutral, Sheet metal MCB distribution board, 415V, on surface/recess, complete with tinned cu busbar, neutral busbar, reath bar, interconnections, powder painted including earthing ect as required( but without MCB/RCCB/isolator) |
67 | Supplying & Fixing 6 amp to 32Amp rating 240V, 10KA"C" curve MCB suitable for inductive loads of following poles in existing MCB DB complete with connections testing & commissioning ect as required. |
68 | 6/32 Amps SP MCB |
69 | 6/32 Amps DP MCB |
70 | Supplying & Fixing following rating 4pole 415V, isolator in existingMCB DB complete with connections testing & commissioning ect as required. |
71 | 63Amp |
72 | Supplying & Fixing following rating double pole ( single phase+ Neutral) 240V, RCCB having asensitive current of 30mA in existingMCB DB complete with connections testing & commissioning ect as required. |
73 | 16/25 amp |
74 | 40 amp |
75 | 63 amp |
76 | Supplying & fixing 20amp 240V, SPN industrial type socket outlet with 2 pole & earth, metal enclosed plug top along with 20amp "C" curve SP MCB in sheet metal encloser in recess/ surface with chained metal cover for the socket outlet complete with connections, testing and commissioning ect as required |
77 | PART- 07 (SPLIT AC SYSTEM) |
78 | Supply of 1.5 TR 5 star inverter type split units IS:1391 part 1 (Make- Haier, LG, Samsung & Voltas) |
79 | Supply of following accessories required for installtion of split AC |
80 | Copper tube of size 1/2"for split AC |
81 | Copper tube of size 5/8"for split AC |
82 | Drain pipe for AC |
83 | Outdoor stand for 1.5 TR split AC |
84 | GST @ 18% of Total (A) |
85 | Labour Cess @ 1% |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail