Road And Building Department-RBD has published Tender For Construction Of Civil Infrastructure For Installation Of Biomedical Waste Management Equipment At Chc, Laida In The District Of Sambalpur. Submission Date for this Tender is 14-07-2023. Building Work Tenders in sambalpur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer-in-charge. |
| 2 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royaltiesof sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 3 | Cement Concrete of Proportion (1:3:6) in foundation and floors i.e., below the base course of terrazoo flooring using 4 cm (1 ½”). size black hard hand broken granite stone metalapproved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15cm - 6”including cost, conveyance, royalties of all materials and cost of all labours, T&P required for the work etc. complete. |
| 4 | 2.5cm(1") thick damp proof course with cement concrete (1:2:4) using 12mm to 20mm but (20mm not to exceed 25%) hard black broken granite stone chips of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete watering, curing, cost and conveyance of all materials - and royalties etc. with all labour and T&P required for the work complete including side shuttering. |
| 5 | Cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour and T&P etc. required for the workcomplete. |
| 6 | R.C.C. work of prop.M-20 in following works using 12mm to 20mm (½” to ¾”) size (20mm not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position. |
| 7 | Lintel |
| 8 | Chajja |
| 9 | Roof Slab |
| 10 | Straightening bent up or coiled M.S. rod or Tor Steel bending, cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works including cost, conveyance andM.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors(payment will be made on weight of M. S. Rods or Tor Steel only and no separate payment will be made towards the weight of binding wires). etc. complete as per specification & direction of Engineer-in-charge. |
| 11 | Fly ash brick masonry in cement mortar (1:6) in Foundation & plinthusing fly ash bricks of23cmx11cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour and T&P required for the work complete in all respect in all floors as per specification and direction ofEngineer-in-charge |
| 12 | Fly ash brick masonry in cement mortar (1:6) in Superstructureusing fly ash bricks of23Cmx11cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and all materials with all labour and T&P required for the work complete in all respect in all floors as per specification and direction ofEngineer-in-charge |
| 13 | 16mm (5/8”) thick cement plaster (1:6) finished smooth to inside roughsurface of9”/10” thick brick walls after raking out the joints including watering and curing with cost with cost, conveyance, royaltiesof all materials with all labour, T&P required for the work etc. complete. |
| 14 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royaltiesof all materials with all labour and T&P required for the work etc. complete in all respect. |
| 15 | 2.5cm (1”) thick artificial stone flooring with cement concrete (1:2:4) laid to proper slope using 12mm size black hard crusher broken granite stone chips of approved quality from approved quarry including rounding the corners and watering, curing with cost, conveyance, royalties of all materials with all labour, cess and T&P required for the work complete in all respect in all floors |
| 16 | 6mm (1/4”) thick cement plaster (1:4) to RCC surface finished smooth including closed deep chipping and slury treatment for celing including watering and curing with cost, conveyance, royalties, and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors |
| 17 | Supplying, fitting and fixing vetrified tile in floors of size 600mm x 600mm of approved make conforming to IS-13755 with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials, taxes, labour, T&P etc. required for the work. |
| 18 | Fixing glazed wall tiles having approved size of approved quality, shade, make & as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties andall materials complete in all respects. |
| 19 | Supplying, fitting and fixing vitrified industrial tiles in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cment of approved quality including cost of all materials, labour, T&P etc required for the work all complete as per direction of Engineer-in-charge. |
| 20 | Supplying, fitting and fixing of M.S. Door / Window shutters, gates & M.S. Grill as per approveddesign as directed by Engineer-in-charge and placing in proper position including cost, conveyance, royalty, labour, T&P etc. complete as per direction of the Engineer – in – Charge. |
| 21 | Supplying fitting and fixing angle iron truss made out of approved MS angle sheets flats approved drawing and design including drilling holes and supplying nuts and bolts with cement concrete (1:2:4) on walls including cutting and mending to proper sizes and welding, cost, conveyance royalties andall materials complete in all respect.as per the direction of E.I.C. .and as per approved specification. |
| 22 | Supplying, fitting and fixing colour coated durashine roofing sheet of 0.45mm (T.C.T.) x 1072 in roofing including fixing with nuts, bolts including cost, conveyance, taxes of all materials with all labour andT&P etc. complete in all respect. |
| 23 | Finishing wall surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffodling staging charges with cost of all materials, labour, T&P etc. complete. |
| 24 | Painting two coats with plastic emulsion paint over a coat ofprimer to make an even finished surface in all floors and heights to wall surface of approved make and shade including cost, conveyance of all materials, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 25 | Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 26 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per the direction of the Engineer-in-charge. |
| 27 | Back filling by excavated earth and compacted in layersincluding cost, conveyance, royalties and of materials and cost of labour with T & P required for the work etc. |
| 28 | E.I. WORKS WIRING FOR LIGHT POINT/ FAN POINT/ EXHAUST FAN POINT/ CALL BELL POINT WITH 1.5SQMM FR COPPER CONDUCTOR SINGLE CORE CABLE IN SURFACE/ RECESSED MEDIUM CLASS PVC CONDUIT WITH PIANO TYPE SWITCH , PHENOLIC LAMINATED SHEET , SUITABLE SIZE M.S BOX AND EARTHING THE POINT WITH 1.5 SQMM FR PVC INSULATED COPPER CONDUCTOR SINGLE CORE CABLE ETC. AS REQUIRED. (MAKE- HAVELLS /HPL/ VGUARD/ FINOLEX/ ANCHOR) |
| 29 | GROUP - A |
| 30 | GROUP - B |
| 31 | GROUP - C |
| 32 | Recessed wiring to 5/6Amp Plug point in 20mm dia non-metalic PVC flexible polytene conduit with 1.5sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 5Amp.,250V piano type switch ISI marked .(Make of wire Finolex/ L&T/ Anchor/ Havels/ V-Guard) |
| 33 | S/F of 5/6A Switch & 3Pin 5/6A Socket on Existing Board |
| 34 | Supplying and fixing PVC batten/ angle holder including connection etc. as required in place of ceiling rose. |
| 35 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.(power points ) |
| 36 | Supplying and fixing of stepped type electronic fan regulator on the existing switch box including connections but excluding laminated sheet etc.asrequired. |
| 37 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(MAKE- HAVELLS /HPL/ VGUARD/ FINOLEX/ ANCHOR) |
| 38 | 2 X 1.5sq. mm + 1 X1.5sq. mm |
| 39 | 2 X 2.5sq. mm + 1 X1.5sq. mm |
| 40 | 2 x 4.0 sq.mm + 1 x 1.5 sq.mm |
| 41 | 2 X 6 sq. mm + 1 X1.5sq. mm |
| 42 | INVERTER WIRING with 1.5sqmm PVC S/C multistrand Copper wire |
| 43 | Supply and fixing of Computer Board |
| 44 | Supply and fixing of Chemecal Earthingas per Govt. Specification |
| 45 | Supply of 6mm2 Alluminioum Service Wire |
| 46 | S/F 1200/1400MM CEILING FAN.(MAKE-BAJAJ/ USHA/ CROMPTON) |
| 47 | Exhaust fan 12" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Usha or equivalent). |
| 48 | S/F OF 90W LED STREET LIGHT |
| 49 | Supply and fixing of 15 watt LED Bulb Lamp ( make Havells/ Halonix/ Bajaj/ Crompton and its equivalent) |
| 50 | S/F of 20W New E-lite LED curve with wide angle profile.High lumen batten with efficacy of 100 lumens( Make - HAVELL MODEL E-LITE LED Curve Catno.LHEXBXPNIN1W020 or its equivalent to Crompton/ philips) |
| 51 | Supply & installation of Panel Board wall mounted size 36" X 20" X 9" made out of 16 SWG CR sheet with powder coating & with following arrangement. -1) 160Amp TPNMCCB-1nos (Legrand/ Snider)(2) 200A Bus Bar- 1 no ,(3) 32 A DP MCB- 4nos, (4) 200Amp Cutout Box:- 1nos with digital instruments with voltmeter, transparent glass, amperemetre, CT coil, Selector switch, Panel fuse & RYB indicator. |
| 52 | Supply and laying of 35 sqmm 3.5 Core XLPE Alluminioum Armoured cable |
| 53 | P.H. WORK Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 54 | 25mm dia PVC ASTM pipe (sch-80) |
| 55 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 56 | 15mm dia CP angle stop cock (Jaquar Make) |
| 57 | 15mm dia CPbib cock (Jaquar Make) |
| 58 | 25mm dia brassfull way valve (Shakti make) |
| 59 | 32mm dia brassfull way valve (Shakti make) |
| 60 | 15mm CP Extension piece |
| 61 | 125mm CP grating |
| 62 | 15mm size C.P. flange |
| 63 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 64 | 1000 liters capacityPVC water storage tank |
| 65 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 66 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 67 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 68 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with |
| 69 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 70 | Towel ring |
| 71 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 72 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 73 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 74 | 600mmx450mm size B.E mirror (swivelled type) |
| 75 | Ext. S/D Portion |
| 76 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 77 | 100mm dia P.V.C. pipe |
| 78 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
