Public Works Department-PWD has published Tender For Renovation And Additional Alteration For Treasury Office In D.A.C. At Pathankot. Submission Date for this Tender is 15-07-2023. Building Work Tenders in pathankot Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (8.26) |
| 2 | Window |
| 3 | Dismantling brick work tile, masonry or tile lining (8.5) |
| 4 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. |
| 5 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete |
| 6 | Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter |
| 7 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 |
| 8 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) |
| 9 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. |
| 10 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 11 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge. 13.65 |
| 12 | 12.5mm thick cement plaster 1:4 |
| 13 | Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. |
| 14 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade. |
| 15 | Painting two coats including priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 16 | Coloured glazed tiles 20 cm x 20 cm and 5 mm thick in skirting and dado on 12 mm thick cement plaster 1:3 in baseand jointing with grey cement slurry @ 3.3kg per sqm and filling joints with white cement slurry in joints including bevelled corners. |
| 17 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ). |
| 18 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) : |
| 19 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 20 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre-laminated particle board with decorative lamination on one side. |
| 21 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) |
| 22 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete |
| 23 | Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) |
| 24 | Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc complete (best make of approved quality). |
| 25 | Providing, laying and instalation of Steel Strong room Door with frame & Grill gate size 2050mm x1150mm tool resistance complete in all respect |
| 26 | Providing & Laying of table |
| 27 | Providing & Laying of Chair |
| 28 | Excavation manually in trenches for pipe lineswithstraight oropencutting in streetsandlanesinbuilt-upareawhere width of street / Lane from wall to wall is less than 3 meterincludingtrimmingand dressing sides leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering,includingthe cost ofdewateringof rainwater,diversionfor traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removalof surplus soil from the site upto 15 meter distance complete in all respects. |
| 29 | Providing and laying, jointing fixing and testingG.I.PipelinesB-Classincluding costofspecialssuchastees, bends,sockets,elbows etc. esting, cutting, threading Inside building complete. |
| 30 | 15mm i/d |
| 31 | 20mm i/d |
| 32 | 25mm i/d |
| 33 | Providing, fixingandjointingUnion Couplings in G.I. Pipe lines. |
| 34 | 15mm i/d G.I. Union |
| 35 | 20mm i/d G.I. Union |
| 36 | 25mm i/d G.I. Union |
| 37 | Provo/ding,fixingandjointinggun-metal peet valves (Heavy Pattern) with hand wheels, onG.I.Pipelines laidinthe ground or inside buildings including all carriages complete. |
| 38 | 20mmi/dGunMetalpeetvalveheavy pattern. |
| 39 | Cutting holes upto 23cm square for pipes inflooringandroofsofbricks,tileswith lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required. |
| 40 | Through floor or roof 11.5cm thick |
| 41 | Cutting chase in brick walls in cement or in floor for embeddingG.I. or C.I pipes lines and making good the same to its original condition. |
| 42 | Size 75 mm x 75 mm |
| 43 | Providingand fixing in positionautomatic brass ball valves in tanks. |
| 44 | 20mm i/d Brass ball valve with plastic ball with G.I. socket |
| 45 | Excavation manuallyin trenches with straight or open cutting in a built up street/ laneshavingwalltowallwidthupto3 metre for sewers and manholes to full depths as shown in drawings, including shoring,dressingto correctsectionsand dewatering of rain water, provision for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, fixing and maintenance of caution boards, fencing, refilling trenches, watering,dressingand restorationof surface to original level and removal of surplus spoils from the site of works upto 15 metre,for all worksotherthan connections to complete in all respects. |
| 46 | Cement concrete 1:6:12 with brick ballast 40mm gauge. |
| 47 | Providing,lowering,cutting& jointingsalt Glazed Stone ware Pipes and Specials ISI marked as per IS 651-2007 class Sp-1 into Trenchesfor all epths and Laying out the same to correct alignment, Gradients, levels etc., In Trenches including all dressing and trimming of bed and sides of trenches,if requiredtrimmingand cutting ofconcretebedsandjointsholes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surroundingbenching,haunchingand envelopes are completed. The sewer shall rest on the bed at every point through-out its length and to ensure this, it shall be grouted in without extra charge by the contractor with 1:3 cement sand mortar includingjointingof pipes and specialsin trenches,usingcementsandmortar1:1 and best white italian spun yarn, finishing 100mm sewer line complete (4" i/d) S.W. pipe |
| 48 | Providing and fixing in position Chinaware EuropeantypewaterclosetPtraporS trap (to the approval of the Engineer-in- charge) suite-consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket,shortbend32 mmdiaincluding cost of solid white cover complete in all respect and to the entire satisfaction of engineer in |
| 49 | Providing and fixing in position best Indian make ( to the approval of the Engineer-in-charge) indian type ORISSA water closet suite for sinking into floor with raised foot treads complete with 100m H.C.I. trap with or without vent as required and all other necessary fittings. Providingandfixingjetspraywith2"-6" long PVC pipe. |
| 50 | With C.P. Brass nut |
| 51 | Providing & fixing in position vitreous Chinware white flat back or angular lipped front urinal of approved make (to the approval of the Engineer-in-charge)of size460 x 350 x 260 mm with C.P. brass tube connection 300 mm longcomplete in all respect. |
| 52 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 53 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 54 | Size 600mmx450mm |
| 55 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. |
| 56 | 110mmi/dSWRUPVCpipelineslaid complete |
| 57 | 90mm i/d SWR UPVC pipe lines laid complete |
| 58 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 59 | For 110mm i/d pipes |
| 60 | Single Tee With Door |
| 61 | Vent Cowls |
| 62 | Coupler |
| 63 | P Trap/Floor Trap 110mm x 75mm |
| 64 | Providing and fixing in position gully traps fixedincementconcrete1:4:8complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete1:2:4 in coping around cover and frame etc. with threecoatsofblackbitumasticsuperior paint of approvedmanufactureon all C.I. workasperstandard designminimum depth of water should be 150 mm with a minimum seal 50mm. |
| 65 | 100mminternalDiametreSWgullytrap with H.C.I. grating and cast iron cover weighingapproximately7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 66 | Providing & Fixing in postion 15 mm i/d bib cockof best quality(as approvedby the Engineer-in-charge). |
| 67 | CP Bib Cock |
| 68 | Providing& Fixingin postionstop cock/ Angle valve (as approved by the Engineer- incharge). |
| 69 | C.P.brass 15mm Angle valve |
| 70 | Providingandfixingin PVCflexibletube connectionof approved make complete in all respects. |
| 71 | Size 15mm x 300mm with CP brass Nut |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
