Military Engineer Services-MES has published Tender For Repair To Water Proofing Treatment, Sunken Treatment, Att, Sanitary Fittings And Allied Plumbing Works, Repairs To Interlocking Tiles, Chequered Tiles And Misc Works In Common Area At Metcalfe House And Petty Repairs To B/R Nature Works Fo. Submission Date for this Tender is 16-08-2023. Shed Construction Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Jul-2023 | Corrigendum01 | Date | 28-07-2023 |
| 2 | 19-Jul-2023 | Corrigendum02 | Date | 04-08-2023 |
| 3 | 04-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-08-2023 |
| 4 | 11-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-08-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling bricks tiles or concrete tiles, single layer on roofs and removal, etc complete all as specified and directed. |
| 2 | Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof)complete all as specified and directed . |
| 3 | Roughening of surfaces of old concrete slab by wire brushing, sweeping, cleaning and washing down to remove all loose dust etc. and brushing neat cement slurry @ 3.00 kg/Square Metre on roof surface, etc complete all as specified and directed. |
| 4 | M&L for 15 mm thick screed bed or bedding layer in CM 1:4, mixed with water proofing compound @ 3% of weight of cement complete all as specified and directed. Note :- WPC shall be measured and paid separatly. |
| 5 | Supply only water proofing compound complete all as specified and directed. |
| 6 | M&L for Water proofing treatment over roof at any height consisting evenly applied bitumen primer coat @ 0.30 litre/ Sq. m on surfaces,Applying evenly a tack coatof bitumen @1.20 Kg /Sqmand a layer of APP polymer 3 mm thick , membrane weight not less than 3.00 Kg/ Sq.m duly sealed incl applying a coat of aluminium paint over a coat of cold emulsion bituminous primer at over laps joints with flame (complete by torch application) complete all as per manufacturer"s instructions,complete all as specified and directed. Notes:- (i)Application of polymeric membrane shall be by torch application. (ii) The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (iii)Primer shall be applied after preparing & cleaning of fully dried cement plastered surface. |
| 7 | M&L forproviding and injecting chemical emulsion for post constructional antitermite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 8 | M&L for antitermite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 Ltres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed. |
| 9 | M&L for Anti-termite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, of side in skirting of existing floors using /Floor emulsion @ one litre per hole,300mm apart including drilling and pluging 12mm dia hloles with CM 1:2 (1cement:2 coarse sand) to match the existing floors complete all as specified and directed. |
| 10 | M&L for Anti-termite treatment using chemical Chlorophyriphos 20% or lindane emulsifiable concentrate conforming to IS:3944 or IS 632 respectively, at point of contract of wood work by chemical emulsion (in oil and kerosene based solution) @ 0.5 litre per hole by drilling 6mm dia hloles at a downward angle of 45 degree at 150mm centre to centre and sealing the same with CM 1:2 (1cement:2 coarse sand) to match the existing floors complete all as specified and directed. |
| 11 | M&L fortreating the soil along the external perimeter of building at the rate of 2.25 Ltrs of anti termite emulsion per meter of the perimeter wall complete all as specified and directed. |
| 12 | Removing building materials etc.to a distance upto 10 km, beyond the lead included in the rates, including loading, unloading and stacking at the destination outside MOD Land in low level area complete all as specified and directed. |
| 13 | Removing building materials etc to a distance exceeding 10 KM but not exceeding 20 KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination outside MOD Land in low level area complete all as specified and directed. |
| 14 | M&L in repair water proofing treatment to sunken RCC slab complete all as specified and directed, comprises the following operations/stage:- (a) The surface shall be rendered clean prior to application of coating. Mechanical grinding of the surface shall be done so that it is free of dust, debris and oil deposits. (b)Removing all loose material, like cement slurry, mortar, plaster and other unwanted particles, which may provide hurdle between chemical and concrete bond. (c)Cleaning the surface with soft brush to make it clean and dust free. (d)Providing and laying of a 75 x 75 mm coving with polymer modified mortar at floor wall joints wherever necessary. (e)Providing and applying 1 coat of Asian Paints (or equivelent brand of Berger/Nerolac)Smartcare Repair Polymer mixed with cement in ratio of 1: 2 over the entire clean and prepared surface as a sealer coat. (f)Supplying and applying two component Asian Paints (or equivelent brand of Berger/Nerolac) Smartcare Ultra Block 2k acrylic polymer modified high performance coating system, brush applied, membrane with an elongation of >220% and tensile strength of 1.72 MPa as per ASTM D 2370:2016, crack bridging ability of 3 mm as per EN 1062-7:2004, no leakage up to 5 bars of water pressure. The system includes final base preparation, applying the coating in two coats with a total consumption of 2.25kg/sqm. (g)Providing and laying 25 mm thick cement sand plaster admixed with integral waterproofing compound @ 200 ml per bag of cement (1 Cement: 4 Sand) followed by neat cement punning. (H)Water testing shall be carried out for 48 hrs. |
| 15 | Taking down cement plaster from brick or stone wall etc including rackingoutjoint, hacking for key scrubing down with water etc complete all as specified and directed. |
| 16 | Dismanting of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 17 | M&L for glazed ceramic tiles 300x200x7/300X450X7mm thick coloured tiles in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to matchthe shade of tile laid over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 18 | M&L for non skid coloured ceramic tiles 400mm X 400mm X 7mm/300X300X7 thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over & including 15mm thick cement screed in CM 1:6 complete all as specified and directed. |
| 19 | M&Lfor glazed ceramic designer coloured tiles of size 600x300x7-8 mmthick on vertical surface as in skirting/dado set and jointed in neat cement slurry and pointing to in white or coloured cement to match the surface over and including 10mm thick rendenring in CM 1:4 on brick wall complete all as specified and directed. |
| 20 | M&L for painting on road hinting/lineswith hot applied thermo plasticcompound paint confirming to MOST specified painting as per manufactures specification / directions, mechanically applied to form 1.5mm thick film on road limit including cleaning and drying the existing dust oil, grease and moisture free surface before applying paint (or equivelent brand of Berger/Nerolac) complete all as specified and directed. |
| 21 | M&L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water. The size of bldg shall be of vary in of each floor and vary in number of floors. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint all as specified and directed. Note : The rates includes for carrying out the work upto G+6 storeys. |
| 22 | M&L for 15mm thick rendering on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement etc complete all as specified and directed. |
| 23 | M&L for two coats of oil bound distemperon new plastered surfaces ofceiling including preparation of surfaces etc complete all as specified and directed. |
| 24 | M&L for applying twocoats of distemper oil emulsion over a coat of Chalk whiting primer, on plastered surfaces, prepara-tory to distempering including 2 mm thick wall care putty on wall incl preparation of new surfaces etc complete all as specified and directed. |
| 25 | S&F in repair vertical veniationblind consisting of aluminium head rail, vanes/louvers 4” wide of approved tint and traverse cordcomplete, complete all as specified and directed. |
| 26 | S&Fin repair vitreous china squatting pan "Orissa" pattern size 580 x 440mm, white, with integral footrest (excluding flushing cistern) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, complete all as specified and directed. |
| 27 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) including Plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device and CP jet etc. complete all as specified and directed. |
| 28 | S&F in repair Viterious China urinals, bowl type (back or corner wall type) of size 465X355X265 mm,complete including providing and fixing plugs,bedding urinal against wall in Cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe,grating and Union for discharge pipe. complete all as specified and directed. |
| 29 | S&F in repair vitreous china Urinal, Half stall type white (excludign flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes fixed in repairs. complete all as specified and directed. |
| 30 | S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimun weight 60 gms) complete all as specified and directed. |
| 31 | S&F in repair PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified and directed. |
| 32 | S&F in repair vitreous china wash hand basin, white flat back, size 550mm x 400mm including pillar tap of chromium plated with capstan head with long screwed shanks and fly nuts, brass chromium plated waste coupling 32mm dia, with fly nuts, pvc waste pipe and MS brackets 25x25x5 mm thick incl cutting for and pining in ends of brackets, fixed as in repairs complete all as specified and directed. |
| 33 | Supply and fixin repair wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type)including cutting for and pinning in ends of brackets or erecting standinclusive ofwaste pipe,waste coupling etc complete all as specified and directed. |
| 34 | S&F in repair Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 35 | S&F in repair PVC internal syphone kit with handle suitable for low level flushing cistern having10 ltrs capacity, white, valveless, syphonic action type , complete all as specified and directed. |
| 36 | S&F in repair flush pipe/L bend for PVC low level flushing cistern as suitable for EWC/ Orissa pattern pan including jointing to WC complete all as specified and directed. |
| 37 | S&F in repair soap dish chromium plated of size 100 x 100 mm any type, fixed with chromium plated brass screws, complete all as specified and directed. |
| 38 | S&F in repair 15mm dia PVC connection with brass nut, of length 450mm, complete all as specified and directed. |
| 39 | S&F in repair PVC connections 15mm dia & 600mm long with PTMT nuts , complete all as specified and directed. |
| 40 | S&F in repair 15mm bore pillar tap long neck,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure,with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 41 | S&F in repair long body Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe, complete all as specified and directed. |
| 42 | S&F in repair Bib taps 15mm dia chromium plated , fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 43 | S&F in repair angle stop valve, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 44 | S&F in repair angle valve 15mm dia cast copper alloy chromium plated, fancy type with capastan head screwed both ends for iron pipe or for union , complete all as specified and directed. |
| 45 | S&F in repair 15 mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling porting of the wall as required including making good to match with existing complete all as specified and directed. |
| 46 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 15mm bore pipe, complete all as specified and directed. |
| 47 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe, complete all as specified and directed. |
| 48 | S&F in repair Chromium plated shower roses 125 mm size fixed with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 49 | S&Fin repair Toilet paper holder with flat recessed type stainless steel box type fixed to wall,with chromium plated brass screws, complete all as specified&directed. |
| 50 | S&F in repair 100 mm dia mild steel chromium plated gratingcomplete all as specified and directed. |
| 51 | S&F in repair chromium plated waste coupling fitting 100mm / 75mm bore pipes to kitchen sinks complete all as specified and directed. |
| 52 | S&F in repair 32mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed complete all as specified and directed. |
| 53 | S&Fin repair 40mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed complete all as specified and directed. |
| 54 | S&F in repair 32mm dia PVC waste pipe for WHB, sink, urinal etc 60cm long with union complete all as specified and directed. |
| 55 | S&F in repair 40mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed. |
| 56 | S&F in repairCP Health faucet with 1.50 Mtr flexible chromium plated tube and hook fixed to angle valve 15mm bore with accessories complete all as specified and directed. |
| 57 | S&F in repair Chromium plated jet spray with CP connection pipe for EWC, 15mm bore with fittings, complete all as specified and directed. |
| 58 | S&F in repair brass chromium plated tubular towel rail 20mm dia 60 cm long between flanges, fixed to walls with necessary screws complete all as specified and directed. |
| 59 | Supply and fixing in repairs brass chromium plated tubular towel ring having dia of ring not less than 150mm fixed to walls with necessary screwscomplete complete all as specified and directed. |
| 60 | S&F in repairs CP brass bottle trap 32 mm dia including jointing to waste fitting and waste pipe complete all as specified and directed. |
| 61 | S&F in repair 15 mm dia GI steel tubing medium gradegalvanised with all fittingsand fixed complete to walls and ceiling or laid in floorscomplete all as specified and directed. |
| 62 | S&F in repair 20 mm dia GI steel tubing medium gradegalvanised with all fittingsand fixed complete to walls and ceiling or laid in floors,complete all as specified and directed. |
| 63 | Cutting chases, pining in making good to facings where required & pointing in CM 1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls, complete all as specified and directed. |
| 64 | S&F in repair rotational moulded polythene water storage tank (Cylindrical vertical with closed top ), white in color, double layer, hoisted and fixed in position 500 ltrs capacity including disonnecting and refixing the GI pipe and fittingscomplete all as specified and directed. |
| 65 | All as per Item Ser No 64.00 above but 1000 ltrs capacity of tank. |
| 66 | Disconnecting existing tanks, setting aside (or lowering if equired ) for repairs ,cleaning,etc.and hoisting if required reconnecting and refixing in position including cleaning and removing all scales and dirt from tanks and from mouths of circulating pipe etc for 250 ltr to500 ltrs capacity of tankscomplete all as specified and directed. |
| 67 | All as per Item Ser No 66.00 above but exc 500 ltrs and not exc 1000 ltrs. |
| 68 | Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground levelcomplete all as specified and directed. |
| 69 | M&L for 40mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed. |
| 70 | S&F glass dividing strips, 3mm thick, 38mm wide complete all as specified and directed. |
| 71 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelersm apexstone, bed plates, including weathering, slightly rounded or chamfered angles and throatingcomplete all as specified and directed. |
| 72 | S&F factory made chequred cement concretecoloured tiles 300mm x 3000mm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 73 | M&L for 75mm thick cement concrete type D-2, 1:4:8(using 40mm graded stone aggregate) as in sub base concrete all as specified and directed. |
| 74 | M&L for Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushedstone aggregate) as in cover slabs of manholes, gully traps etcset in CM 1:4 complete all as specified and directed. |
| 75 | M&L glazed ceramic tiles 300x450x7to8mm thick coloured tiles in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to matchas in dado over 15mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 76 | M&L for light shade coloured vitrified light shade tiles(600x600mm size) 10 mm thick (Sqm/ rectangular) polished,in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 77 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed. |
| 78 | M&L for machine cutkota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complet including 20mm thick screed bed or bedding layer in CM 1:6,complete all as specified and directed. |
| 79 | M&L machine cut 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Note:- (i) The rate of granite stone shalldeemed to be included for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also deemed to be included for cutting and and granite polishing to achive the desired granite finish. |
| 80 | Easing of door/windows shutters (without taking off) of not exceeding 1 Sqm of panels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of tower bolts. Sliding bolts etc complete all as specified and directed. |
| 81 | Easing of door/windows shutters (without taking off) exceeding 1 Sqm but n exc 2 sqm of pannels for easy closing/opening tightning of hinges or changing the position of hinges adjustments of tower bolts. Sliding bolts etc complete all as specified and directed. |
| 82 | Taking down and Adjusting / repairing of steel window shutters for smooth opening/closing including greasing, welding and adjustment of projecting type friction hinges in any position make fully functioning complete all as specified and directed. |
| 83 | S&F in repairaluminium alloy body floor door stopper of size 75m having double round legs for better grip ,with rubber base fixed to door shutters with countersunk screws complete all as specified and directed. |
| 84 | S&F in repair 250 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section complete all as specified and directed. |
| 85 | M&L in repair aluminium sheeting 0.56 mm thick fixed to wooden shutters with screw including cutting to required size etc complete all as specified and directed. |
| 86 | M&L securing glass of any description in existing steel frame with putty including removing of old putty complete all as specified and directed. |
| 87 | S&F in repair extruded aluminium alloy handles, fabricated type, anodised 150 mm sizecomplete all as specified and directed. |
| 88 | S&F in repair 200 mm long aluminium anodised barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 89 | S&F in repair 100 mm long aluminium anodised hasp and stapple safety type Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 90 | S&F in repair 100 mm size steel window handles, Including welding if required complete all as specified and directed. |
| 91 | S&F in repair 100 mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed. |
| 92 | S&F in repair 75 mm hinges MS Butt hinges medium weight cold rolled. complete all as specified and directed. |
| 93 | S&F in repair 100 mm long aluminium handles, cast type anodied for alluminum windows complete all as specified and directed. |
| 94 | S&F in repair stainless steel wire cloth 0.36 mm nominaldia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed. |
| 95 | S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed. |
| 96 | S&F in repair 4 mm thick sheet glass in squares/rectangle of size excedding 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed. |
| 97 | S&F in repair 5.5mm thick sheet glass of any colour, ordinary quality and glazing with snap beading and gasket, neoprene packing etc. for aluminium door & window exc 0.5 Sqm in each pane. complete all as specified and directed. |
| 98 | S&F 5.5 mm thick sheet glass in squares/rectangle area not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) including rubber beading complete all as specified and directed. |
| 99 | Taking down and refixing of PVC door shutter, after repairing loosenedjoints of styles,hinges etc of chowkhets orframes and easing etc and making complete functional complete all as specified and directed. |
| 100 | S&F in repair door closer hydraulically regulated, aluminium body designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 101 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete complete all as specified and directed. |
| 102 | S&F in repairs 600mm x 450mm x 5 mm thick bevelled edge looking mirror of selected quality glass with aluminium frame of channel alround mounted on 4 mm thick commercial ply or AC building boardfitted to wooden plug with CP brassscrews complete all as specified and directed. |
| 103 | Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed. |
| 104 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 105 | M&L for racking out old joints of roof tiles including flush pointing in CM 1:3 upto depth of 20 mm complete including cutting removing vegetation complete all as specified and directed. |
| 106 | M&L welding in repairs (thickness of metal to be welded n exc 06 mm) in any situation and in any floor complete all as specified and directed. |
| 107 | Repairing of rolling shutter push type with necessary repair work of defective parts i.e, re posting of laths, riveting to old defective rivets, tightning nuts and bolts, replacement of spring, greasing to movable parts and at guide channel, greasing the sides of the rolling shutter,including taking out and re-fixing rolling shutter for smooth functioning size of rolling shutter n.exc 25 sqm each, complete all as specified and directed. |
| 108 | M&L two coats of synthetic enamel paint over a coat of zinc chrome/red oxideprimer including preparation of new or previously untreated steel surfacesover 10 cm in width or girth, complete all as specified and directed. |
| 109 | S&F in repair mortice lock, verticle type of brass complete size 100mm and 4 levers complete all as specified and directed. |
| 110 | Taking down chowkhats or frames with shutter (without taking off shutters from the frame) of size exc 1.5 sqm but not exc 4 sqm and making good to distrubed surface without any extra cost complete all as specified and directed. |
| 111 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm and making good to distrubed surface without any extra cost complete all as specified and directed. |
| 112 | S&F pressed steel frames for doors with one or more rebates of size 105x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet, complete all as specified and directed. |
| 113 | M&L for pressed steel frames for doors of size 125 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates welded with frame and making arrangement for fixing of door spring etc, complete all as specified and directed. |
| 114 | S&F factory made solid PVC door frame size 50mmx47mm made out of 5mm thickplain colour PVC sheet reinforced with MS square tube as per spacification, complete all as specified and directed. |
| 115 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling hollow of pressed steel frame, complete all as specified and directed. |
| 116 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gep insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per spacification, complete all as specified and directed. |
| 117 | S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed. |
| 118 | M&L prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint coat, complete all as specified and directed. |
| 119 | S&F 100mm size butt hinges, medium weight cold rolled mild steel, complete all as specified and directed. |
| 120 | S&F 150 mm long aluminum anodized barrel tower bolt of extruded section, complete all as specified and directed. |
| 121 | S&F 150mm size aluminum handles cast type, anodized, complete all as specified and directed. |
| 122 | S&F 250mm long aluminium alloy anodized sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts andsliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed. |
| 123 | S&F in repair 50 micron thick podwer coated aluminium grill 6x 45mm thick section 10cm center to center spacing complete with U-channel all around fixed in windows with screws complete all as specified and directed. |
| 124 | S&F anodised aluminiumpowder coating aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed. |
| 125 | S&F anodised aluminiumPowder coating door shutters aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, ruber neoprene packing , hinges,anodised aluminium snap beading screws, all necessary builders hardware etc, complete all as specified and directed. |
| 126 | S&F anodised aluminiumPowder coatingwindow and ventilator shutters, side hung type without sash bars aluminium section weighing not less tha 0.55Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardare, complete all as specified and directed. |
| 127 | S&F 12mm thick prelaminated particle board exterior grade with decorative prelaminated both sides of approved shades fixed to aluminium shutters/ partitions complete all as specified and directed. |
| 128 | S&F 4.8mm thick sheet glass ordinary quality in Squre/rectangle exc 0.5 sqm each pane coloured and fixed with glazing pins and rubber beading etc in aluminium door/partion etc complete all as specified and directed. |
| 129 | S&F in repair aluminium anodised fully glazed partly panelled partitions and fixed glazing made out of anodized aluminium section 63.50x 38.10 x 1.60mm including necessary jointing cleats glazing clips, rubber packing anodised alum snap beading screws etc, frame work fixed to walls , floor and ceiling with rawl plug wherever required complete all as specified and directed. Note: - (i) Area of each panel shall not be exceding 01 sqm. (ii)Sheet glass and particle board shall be measured and paid for separately. |
| 130 | S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 131 | S&F in repair Stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 132 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 133 | S&F in repair 110 mm bore PVC (SWR) bends with rubber ring joints complete all as specified and directed. |
| 134 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required,complete all as specified and directed. |
| 135 | S&F in repair PVC (SWR) 75mm dia soil waste and rainwater drainage pipes single socketedin any length withrubber ring joint laid in trenches or in floor complete all as specified and directed. |
| 136 | S&F in repair 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified and directed. |
| 137 | Dismentling boarding, any description, fixed in any positioin with nails complete all as specified and directed. |
| 138 | S&F Anodised aluminium snap grid frame work for false ceiling of Size of grid 605x605mm complete all as specified and directed. |
| 139 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 140 | M&L for 8mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed. |
| 141 | S&F solid PVC wall linining/panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed. |
| 142 | S&F of 5mm thick plain colour PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 143 | M&Lfortaking down existing treatment and applying Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick in cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note :- (i) White cement shall be used in place of ordinary cement in the top layer of the item of washed stone grit plaster and quoted rate shall deemed to be included for the same. (ii) Providing groves shall deemed to be included in the quoted rate. |
| 144 | Dismentling wrought iron or mild steel work of any descriptions not otherwise provided complete all as specified and directed. |
| 145 | M&Lfor pre-polishedcoloured chequered cement concrete tiles 30cm X 30cm X 25mm thick, with white cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 146 | M&L for 10mm thick anti skid pavement tiles (heavy duty) of area n.exc 0.18 sqm each of approved colour & shade & antiskid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match laid over & including 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 147 | Demolition of cement concrete (unreinforced) of any position not other wise described specifically provided for and including removing demolished unserviceable material/debris out side MoD land in low laying area complete all as specified and directed. |
| 148 | M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 149 | M&L for 80mm thick pre-cast PCC coloured designerinter locking tiles/ paver block with grey cement and no pigment any shape & size confirming to IS-15658 -2006, M-40 grade over and including 40mm thick sand cushioning layer complete all as specified and directed. |
| 150 | M&L for precast concrete coloureddesigner interlocking paver block any shape and size confirming to IS-15658 - 2006 of 60mm thickness, M-40 grade with gray cement and no pigment laid over and including 40 mm thick sand cussioning complete all as specified and directed. |
| 151 | Dismantling structural steel work including doors, gates, angle post but excluding framed truss etc complete all as specified and directed. |
| 152 | S&Fmild steel works as framed work such as door, grill , railing, cattle trap on open drains using mild steel angle iron,framed guard bars; barred iron doors; ladders; framed balusters; wall ways; railings; framework of water tanks including jali and similar work, MS flats of sizes as directed with and including provision of MS hinges and MS Hold fast,conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 153 | S&F mild steel work in tubular trusses for pillar/post/rafter/purlin with frame work or frame work forACPboardwith special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 154 | M&L for 15mm thick rendering on brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement etc complete all as specified and directed. |
| 155 | M&L forRough cast plaster including 15mm thick rendering in CM 1:3 onbrick work or concrete surfaces complete as specifed in SSR pat -I clause 14.22 complete all as specified and directed. Note :- Rough cast finish to be as below :- After applying the under coat of CM 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generallly of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even.The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered. |
| 156 | M&L for applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation ofsurfaces, complete all as specified and directed. |
| 157 | Providing cement concrete 1:2:4 type B-1 using 12.5mm graded stone aggregate as in roof kerbs of mud stops, rounded or chamfered on edges, complete all as specified and directed. |
| 158 | S&F factory made cement concrete kerb stone, finished surface of size 20cmx30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfacesof sides and 20mm for the rest of surfaces jointedin cement mortar 1:6 and struck flush etc including demolition of old broken kerb stone and removing of same out side MoD land in low laying area complete all as specified and as directed . |
| 159 | M&L for applying two coats of synthetic enamel paint over concrete/plastered surfaces along with prepration of new or previously untreatedsurfaces of any description over 10cm width or girth with one coat of priming paints plaster coat complete all as specified and directed. |
| 160 | Demolition of reinforced cement concrete as in drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 161 | S&F Factory made precast heavy duty (grade M-40) drain/manhole covers with MS frame and reinforcement (size Square/rectangular/circular with ring) complete all as specified and directed. |
| 162 | S&F in repair Stainless steel ( Grade 304) hollow tube, thickness 16 guage (Round or square/rectangularpipe) of any dia /size fixed as in posts / railing with knock-down fixing system & top Mounted Round Baluster made of 38 to 50mmmm dia Stainless steel 304 Grade as in railing,balusters,posts,newel posts,running rails,middlle rails,chains etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangementincluding making good to the disturbed surfaces as required complete all as specified and directed. |
| 163 | Demolition of brick work built in cement mortar of any description complete all as specified and directed. |
| 164 | M&L for brick masonry with sub class old size `B` brickstraight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 165 | M&L for two coats of acrylic exterior emulsion of any tint including priming with alkali resistant primary paint on external cement plastered surfaces ofwallcomplete all as specified and directed . |
| 166 | Removal of air lock / blockage of water in GI tubing 15mm/20mm bore cleaning the pipe or fitting etc and refixing the same in position complete all as specified and directed . |
| 167 | Repair to leakage in bib taps,pillar taps,stop cock, angle valve and low level flushing cistern,etc of any description by changing the washer etc complete all as specified and directed . |
| 168 | Supply and fix in repairs brass spindles for bib tap and angle cock etc (as per sample kept in office) complete all as specified and directed . |
| 169 | Supply and fix in repairs Brass spindle for WHB mixer and Wall Mixer and concealed stop cock (as per sample kept in office) complete all as specified and directed . |
| 170 | S&F in repair small fittings galvanised iron medium grade such as sockets, elbow, nipple,tee,union and hexa nipple etc as requiered for GI tubing for 15mm bore pipe complete all as specified and directed. |
| 171 | All as per Item Ser 170.00 above but for 20mm bore pipe. |
| 172 | S&F in repair 20mm gun metal, globe or gate valves wih iron wheel head,screwed both ends for iron pipe complete as specified and directed. |
| 173 | All as per item Ser No 172.00 above but 25mm dia. |
| 174 | All as per item Ser No 172.00 above but 40mm dia. |
| 175 | M&L in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete B-1, 1:2:4 complete all as specified and directed . |
| 176 | S&F in repair sand cast iron `P" or `S" trap 100mm dia complete all as specified and directed . |
| 177 | S&F in repair 100 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 178 | S&F stainless steel butt hinges 100 mm long complete all as specified and directed .. |
| 179 | S&F in repair continous (piano) hinges mild steel bright finish or electro galvanised width of flaps (when open) 40 mm complete all as specified and directed . |
| 180 | S&F in repair Aral bihari hinges of standered size and screw complete all as specified and directed |
| 181 | S&F in repair 125mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed . |
| 182 | S&F in repair 100mm mild steel Mortice lock, vertical type , 2 leavers complete all as specified and directed |
| 183 | S&F in repair 50 mm brass Mortice lock, vertical type, 2 leavers complete all as specified and directed |
| 184 | S&F in repairfancy type pillar tap 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure withor with out lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed . |
| 185 | S&F in repair waste fitting CP Brass 40mmdia for sink, basin complete all as specified and directed. |
| 186 | S&F in repair Toilet paper holder vitreous china box type fixed to wall withCP brass screw complete all as specified and directed . |
| 187 | S&F in repair CP grating 125 mm dia with or without hole for waste pipe fixed on floor / nahani trap fixed with cement morter complete all as specified and directed . |
| 188 | S&F in repair floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed . |
| 189 | S&F in repair aluminium(Extruded section body) door closer hydraulically regulated,designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 190 | S&F in repair stainless steel wire cloth 0.56 mm nominaldia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed. |
| 191 | M&L for welding in repair exc.2.5cm but n.exc.5cm in length of metal having thickness n.exc, 6mm complete all as specified and directed. |
| 192 | S&F in repair 18-19mm thick Prelaminated particle board, interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timberframe work by taking out old unserviceable board from Kitchen cupboard/almirahacomplete all as specified and directed . |
| 193 | S&F in repair plywood 6mm thick, grade BWP, type BB fixed with screw to timber frame work complete all as specified and directed |
| 194 | S&F in repair50mm dia brass polishedcupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed . |
| 195 | S&F in repair 20mm dia MS CP curtain rods with fixing brackets, stops etc complete all as specified and directed |
| 196 | S&F in repair2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type or cranked bolts and washer in roof and wall etc complete all as specified and directed . |
| 197 | M&L for machine cutkota stone slab flooring 20-25mm thick in staircase riser/tread/skirting /dado etc laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completed over and including 10mm thick screed bed or bedding layer in CM1:4 complete all as specified and directed . |
| 198 | M&L for rubber moulded prepolished coloured precast concrete interlocking paver block60mm thick of any shape and size with white cement and pigment, M-35 Grade, confirming to IS 15658-2006complete all as specified and directed. |
| 199 | M&L Sand filling/stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed . |
| 200 | M&L for Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed. |
| 201 | S&F in repair kitchen plate rack of size 33" X 31" X 10" made out of 1mm thick stainless steel complete all as specified and directed . |
| 202 | S&F in repair night latch 75 mm 4 lever brass body complete all as specified and as directed. |
| 203 | S&F in repair sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joint fixed to wall complete all as specified and directed . |
| 204 | S&F in repairs sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints fixed to wall complete all as specified and directed . |
| 205 | S&F in repairs sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed . |
| 206 | S&F in repair sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed . |
| 207 | S&F stack clamps, made out of 50 mmX 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia pipecomplete all as specified and directed . |
| 208 | All as per item Ser No. 207.00 above but 100mm dia pipe. |
| 209 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore dia and fixed complete all as specified and directed. |
| 210 | M&L for 10mm thick cement plaster on brick/concrete surface in cement mortar 1:4 finished even and smooth surface without using extra cement complete all as specified and directed. |
| 211 | Preparation of newly plastere wall surfaces and applying two coats of cement base paint over a coat of priming paint complete all as specified and directed . |
| 212 | M&L for white cement as in sealing of traps/sides of "P" or "S" trap/joint of flush pipes and WC and making good complete all as specified and directed . |
| 213 | Dismantling cast iron work of any description complete all as specified and directed . |
| 214 | S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed . |
| 215 | S&F Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and directed . |
| 216 | M&L in repair aluminium sheeting 0.71 mm thick fixed to wooden shutters with CP screw including cutting to required size etc complete all as specified and directed. |
| 217 | Taking down shuttersexc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed . |
| 218 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,including spacers and epoxy fillings in joints where ever required complete all as specified and directed. |
| 219 | M&L for 15mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 220 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.06 sqm,vertical surfaces as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick in CM 1:4complete all as specified and directed. |
| 221 | M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc.0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry, laid over and including screed bed 15 mm thick in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified and directed . |
| 222 | M&L prepolished coloured chequred cement concrete tiles 300X300X25 mm size, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 223 | M&L for Cement concrete type C2 1:3:6 (40mm graded stone aggregate) as in foundations, filling and mass concrete/Subbase complete all as specified and directed . |
| 224 | M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection etc. complete all as specified and directed . |
| 225 | M&L for applying silicon sealeant on joints of wall, cill, jambs, roof, window etc with sufficient quantity for proper sealing of joints complete all as specified and directed. |
| 226 | M&L for plain cement concrete 1:5:10 mix, type E-2 (using 40mm graded aggregate) as in filling of sunken portion complete all as specified and directed. |
| 227 | M&L PCC 1:2:4 ( type B 0 using 12.5 mm graded stone aggregate) mixing with WPC levelling course in floor etc complete all as specified and directed. Note:- WPC shall be measured and paid seperatly under respective item as "Supply only". |
| 228 | Providingand applyingspecially formulated Asian Paints Smart Care Hydroloc (or equivalent in sika/Fosroc/pidilite as approved) , a one component, ready-to-use, penetrative-cum-film forming interior waterproofing solution that provides best-in-class solution to interior waterproofing problems like dampness and efflorescence. It forms a breathable, but water-tight film which doesn’t allow transport of water and salts to the surface complete all as per manufacturer"s instructions complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
