|
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m (One point five meter) in width or 10 sqm (ten squaremeter) on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five meter) , including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m (fifty meter) including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing. 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 4 | Stone soling properly hand-packed filling interstices with spalls and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm (hundred millimetre) spread thickness (finished work including materials and labour) including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 5 | Kota stone slab flooring over 20 mm (twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 6 | Steel work in built up section trusses and framed work including hosting fixing in position and applying a priming coat of red lead paint as per direction of Engineer-in-Charge. In beams joists channels angles, tees, flats with connecting platesor Angle cleats as main and crossbeams hip and jack rafter purlin connected to common rafter and the like including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 7 | Providing and fixing MS BP sheet 1.66mm ( one point sixty millimetre) to 2mm (two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid seprately). including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 8 | Providing and fixing 0.60mm ( ziro point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty)microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 9 | Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (ziro point sixty millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 10 | Providing and laying 15 mm (fifteen millimetre) cement plaster on the rough side of single or half brick wall of mix : 1:6 (one cement: six fine sand) including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 11 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
| 12 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of material within all leads and lifts and as per direction of Engineer-in-Charge |
