Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-07-2023 | AMENDMENT | BOQ | 22-07-2023 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frame not exceeding 1.5 sqm each with shutter(s) (without taking off shutters from the frame), including removing from site and making good the disturbed surface as per original( except filling of hold fast concrete) , complete all as specified and directed. |
| 2 | All as per srl Item No 1.00 here-in-above but exceeding 1.5 Sqm and not exceeding 4 Sqm, complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1.00 m and n.exc 2.00 Sqm. complete all as specified and directed. |
| 4 | Supply andfixing steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (AF) Ambala.(ii) Glazing & wire gauge shall be measured and paid separately. |
| 5 | Supply and fixing Pressed steel framessize 125mmX60mm for doors with one or more rebates incuding necessary fixing lugs, hinges lock strike plate,etc.., completeall as specified and directed. |
| 6 | Supply and fixing 35 mm thick, 2nd class hardwood rail and style plain, framed, panelled shutters (two panel) with lock rail and panel of 9 mmB.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face.The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated and directed as Engineer-in-Charge |
| 7 | Supply and fixingto chowkats, 35mm thick,2ndst class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a). |
| 8 | M/L Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified and directed. |
| 9 | Supply and fixing Solid PVC Door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with 19mm x 19mm M.S. Square tube profiles are mitred cut at corners and joined by inserting 2 Nos 150 mm long brackets of 15mm x 15 mm MS square tube shall 19 mm x 19 mm in square tubes and suitably scruwed suppling & fixing in opening, complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supply and fixingfactory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MSframe shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitablePVC sheet beading and joined together with solvent cementand fixed in the frame at site complete as per specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and fixingButt hinges 125 mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 12 | Supply and fixing300mm long, Aluminium alloy,anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, complete all as specified and directed. |
| 13 | Supply and fixing200mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 14 | Supply and fixing aluminium handles, cast type, anodised150 mm size complete all as specified and directed. |
| 15 | Supply and fixing galvanised mild steel wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 16 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 17 | Supply and fixing 3 mm thick ordinaryquality andglazing with oil putty in squares n. exc0.5 Sqm in each pane complete all as specified and directed. |
| 18 | Material and labour for preparing surfaces of new or previously untreated surfaces ofsteel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth complete all as specified and directed. |
| 19 | Material and labour preparing new or previously untreatedsurfaces ofwood & wood based and applying two coats of synthetic enamel paint over a coat of pink primer, over10 cm in width or girth complete all as specified and directed. |
| 20 | Supply andFixing for bands,straps, hold fasts ; wall ties, plate washers and similar small articles confirming to Fe-209 Gde-E-165 complete all as specified and directed. |
| 21 | Material and LabourPCC (1:3:6), type C1, (using 20 mm graded stone aggregates) as in filling of MS sheet chowkats, fixing of hold fast and window chajja complete all as specified and directed. |
| 22 | Supply and fixing mild steel300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed with screw to wooden frames or with welding to steel frames complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fixing in repairmild steel300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed with screw to wooden frames or with welding to steel frames complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fixingin repairs galvanised mild steel wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 25 | Supply and fixing in repair Door closer hydraulically regulated, designation No. 2, universal type of aluminium body suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg fixed to door frame with screws or welding complete complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and labour anodised aluminium doorand chowkhatsmade out of hollow extruded aluminium section as mentioned below. Each door shall beprovided with 02 Nos disc or Dtype aluminium handles, 02 Nos aluminium tower bolts 200mm long, one brass mortice lock of six levers with key in duplicate and shallbe regulated by provided double action hydraulic floor doorspring/hydraulic door closer (Make sandhu/RITZ).Shutter to be partly glazed with andincluding 5mm thick tinted glass and partlypanelled with and including 12mm thick prelaminated particle board with decorativelaminations on both sides, rubber beading/gasket, anodised aluminium beading, screws complete in all respect all as directed by the Engineer-in-charge. Chowkhat/frame: 101.6x44.45x1.5mm thickShutter top and bottom rail: 114.3x44.45x1.5mm thickShutter middle rail : 83.5x44.45x1.5mm thickShutter vertical/style : 83.5x44.45x1.5mm thickMAKE : (i) Anodised aluminium section : JINDAL, HINDALCO, INDALCO(ii)PARTICLE BOARD : NOVAPAN, KITPLY, BHUTAN BOARD (iii)Glass : saint gobin, modi guard, TATA. |
| 27 | Supply and fixing anodisedaluminium window including aluminium grill made outof hollow extruded section as mentioned belowand glazed with tinted glass 4mm thick fixedwith glazing clips rubber beading/gasket anodised aluminiumbeading screw and lock type handlesof size 75mm, 2 Nos aluminium tower bolts 150mm long etccomplete all as specified anddirected with the following sizes:-Chowkat/Frame Size :101.6x44.45x1.5mm thickMullion: Not less than 0.55Kg/RM Shutter : Not less than 0.55 Kg/RM |
| 28 | Demolition of plain cement concrete (un-reinforced) in gound floors and paving n exc 15 cm thickness (below or above ground level) including removal of debries to distance exc 50 mtr n exc 250 mtr, complete all as specified and directed. |
| 29 | Material and labour for 25mm thick PCC 1:2:4, (20mm graded aggregate in sub basecomplete all as specified and directed. |
| 30 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed |
| 31 | Material and labour for non-skid ceramic colouredfloor tiles7-8 mm thick (square /rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm set and jointed in neat cement slurry and pointed with white orcoloured cement to match, including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engr in charge. |
| 32 | Material and labour forlight shade vetrified ceramic tiles 10mm thick (square/rectangular) polished, arrea of each tiles not exceeding 0.36 sqm, in floors etc. etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles colour, including 15mm thickscreed bed(in CM 1:6), complete all as specified and directed. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store andrubbish off the premises complete all as specified and directed. |
| 34 | M&L for Glazed ceramic tiles in vertical surface 450x 300X 7mm thick set and jointed in neat cement slurry and pointed in colour cement to match colour of tiles complete including a coat of neat cement slurry with 3.0 kg of cement per sq. metre. over 10 mm thick rendering in CM 1:4 all asspecified and directed by Engr-ln-Charge |
| 35 | M & L for kota stone 20-25mm thick in riser , skirting, dado etc laid over cement screed and jointed with grey cement slurry mixed with pigments to match with the shade of the slab including rubbing and polishing including 10mm thick rendering as in backing, in CM 1:4 complete all as specified and directed all as specified and directed |
| 36 | Material and labour 75 mm thick cement concrete type C2, 1:3:6using (40mm graded mechanically crushed stone aggregate) as in plinth protectionand platform and floor.etc, finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 37 | Dismantling ofAsbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 38 | M & L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with \"L\" type or \"J\" type or cranked hook bolts in roofs complete all as specified and directed. |
| 39 | S & Ffor Pre-painted galvalume aluminum zinc coating GI basedcorrugated steel sheet 0.50mm thick ofcolour as approved having tensile strength of 550 Mpa and grade AZ 150 as in roof coveringand cladding complete all as specified and directed. |
| 40 | S & F for pre-painted galvalume aluminum zinc coating GI basedplainsteel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and grade AZ 150 as in ridge to roofl, fixed with self taping screws complete all as specified and directed. |
| 41 | Dismantling of mild steel work or wrought iron of any description in any position complete all as specified and directed. |
| 42 | S & F mild steel flat iron wind ties for for roof including secruing bolts, including necessary driling and similar works conformig to Fe-290 Gde E-165 complete all as specified and directed. |
| 43 | M & L for MS work in tubular/ roof trusses (framed) trussed, purlins ,crane gantries,rails , stanchions and fasteningsand heavy bracket framing (beam ,tee, channel, angle or flat section confirming to Fe-410-W (Gde-250 quality A) complete all as specified and directed. |
| 44 | Supply and fix for MS screw bolts any size ( machine made) with hexagonal square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nutexc 5cm but not exc 10 cm long complete all as specified and directed. |
| 45 | Demolition of mud phuska in roof any thickness and loweringdown and removing complete all as specified and directed. |
| 46 | Dismantling roofbrick tiles or terrasing tilesingle layer complete all as specified and directed. |
| 47 | M/L Rendering15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fairon in cement mortar (1:3), using water proofing compound as per recommended ratio, after brushing cement slurry complete all as specified and directed.Note:- water proofing compound shall be measured and paid seperately |
| 48 | M/L PCC type B-1 (1:2:4), using 20 mm graded stone aggregates asin roof kerbs or mud stops, rounded or chamfered on edges surface channels and drains,Filling of MS sheet chowkats ,roof padding complete all as specified and directed. |
| 49 | M/L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm & adjoining vertical surfaces over clean RCC/plastered roof surfaces complete all as specified and directed. |
| 50 | M/L 40 mm thick brick tiles laid on cement mortar (1:6), 15 mm thick and joints filled with flush pointing in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on complete all as specified and directed. |
| 51 | M/L 40 mm thick brick tiles (Except tiles) including cleaning cement mortar and laid on cement mortar (1:6) , 15 mm thick and joints filled with flush pointing in cement mortar (1:3) mixed with 5% of crude oil by weight of cementcomplete all as specified and directed. |
| 52 | Material and labour for APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3 kg/sqm of Make:-STP Texsa Ltd or hyper plas (Polyster),black finish reinforced with non-woven polyster matt (Weight not less than 150 gms/Sqm) with thermo fusible finish laid over compatible bitumen primer at the rate of 0.40 Ltr /Sqm torching over laps with a propane or abutan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions including preparation of surface complete all as specified and directed by Engr-in-Charge. Note:-(i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing.(ii) 10% amount of the total amount of water proofing treatment shall be retained as a guantee and shall be released after 10 years.However contractor may deposite the FDR of same amount in favour of GE.If contractor fail to rectify the defect pointed out during this period in writting,the defect shall be got rectified at contractor\"risk and cost and the payment shall be made from the amount kept reserved or by encasing the FDR deposited by the contractor as guarntee.Contractor\"s quoted rate for this item shall deemed to be inclusive of this aspect. |
| 53 | Suppy only intergral water proofing compound complete all as specified and directed. |
| 54 | Cutting groove in parapet wall 75 mm wide and 65 mm deep,complete all as specified and directed. |
| 55 | Cutting out cracks to V-section in existing roofs or terracing up to 25 mm depth, cleaning out, and filling solidly with a tarplastic sealing comound after applying shalitex primer complete all as specified and directed.. MAKE OF SEALING COMPOUND: STP, CHOKSY. |
| 56 | Taking down cement plaster of any description on brick walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 57 | Demolition of brick work built in cement mortor including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed. |
| 58 | Material and labour rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces fair and even smooth without using extra cement complete all as specified and directed. |
| 59 | Material and labour rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces fair and even smooth without using extra cement complete all as specified and directed. |
| 60 | Material and labour rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 on ceiling allt complete all as specified and directed. |
| 61 | Material and labour Brick work with sub class \"B\" bricks, using old size bricks straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 62 | All as per srlItem no 61.00 here-in-before ,but except bricks complete all as specified and directed. |
| 63 | M&L for preparation of new surfaces byincl cornices & pillasters and applying two coats of Oil bound distemper on walls over a coat of alkali resistant priming paint, over a coat of wall care putty complete all as specified and directed. |
| 64 | M & L Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of wall care putty complete all as specified and directed. |
| 65 | M & L Preparation of newly plasteredsurfaces on ceilingand applying two coats of white wash on ceilingcomplete all as specified and directed. |
| 66 | Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc or insulation boards/slabs/blankets,any thickness including cover fillets complete all as specified and directed. |
| 67 | 12mm thick Perforated particle board /tiles for insulation and accoustic purpose, 60x60 cm in size, fixed with nails to timber frame work wth staples on ta a snap grid complete all as specified and directed. |
| 68 | S& F of Size of grid 605 x 605mm Anodised aluminium snap grid for work for false ceiling complete all as specified and directed. |
| 69 | S&F Hanger of GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long expension hold fastener 12.5mm dia. 40 mm long complete all as specified. made out of GI flat 40x3mm size 60 mm long complete complete all as specified and directed. |
| 70 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings, complete all as specified and directed. |
| 71 | S&F 5 mm thick PVC Sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 72 | Taking up or down steel tubing and connections, for refixing or removal from sitefor 15mm bore pipe, complete all as specified and directed. |
| 73 | Supply and fixing ,15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 74 | Refixingold steel tubing 15mm bore and connections (taken outGI tubing from item No. 36 above)in new or old position (walls, ceiling, floors, etc)inclcleaning complete all as specified and directed. |
| 75 | Supply and fixing in repair, Drapery rods, fancy type , made of mild steel conduits with PVCinsulation, 20mm borehaving facny end knobs at each end, fixed with rawlplug to wall as in curtain rods complete all as specified and directed.(Quality and design shall be as approved by GE). |
| 76 | Supply and fixing in repairsFancy type bib tap brass CP ( Long body) 15mm bore complete all as specified and directed. |
| 77 | S & F Angle stop cock fancy type CP with long shank 15mm bore as in repairs complete all as specified and directed. |
| 78 | S & F 15 mm bore Concealed stop cock fancy type CP with long shank and cup washer as in repairs complete all as specified and directed. |
| 79 | Supply and fixing in repairs Toilet paper holder, cast copper alloy, chromium platedfixed in position,complete all as specified and directed.MAKE: PRAYAG Cat No. BA-18 or equivalent in, ESS ESS, CZAR, JAQUAR, MARC. |
| 80 | Supply and fixing in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms),complete all as specified and directed. |
| 81 | supply and fixing in repair Cast copper alloy, chromium plated soap dish, complete all as specified and directed.MAKE: PRAYAG Cat No. BA-35 or equivalent in, ESS ESS, CZAR, JAQUAR, MARC. |
| 82 | Supply and fixing in repairs Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 83 | Supply and fixing 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 84 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm IN REPAIR, complete all as specified and directed. MAKE: PRAYAG,POLYTUF |
| 85 | Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 110 mm size, complete all as specified and directed.MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 86 | Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for uPVC soil waste discharge pipes 75 mm size, complete all as specified and directed.MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 87 | Supply and fixing in repairs PVC cowl any radius, conforming to IS:14735 suitable for110 mm bore, complete all as specified and directed.MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 88 | Supply and fixing in repairs UPVC floor trap with PVC grating suitable for 75 mm external dia,type-B pipes, ISI marked complete all as specified and directed.MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 89 | Supply and fixing in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement for 110 mm external dia,type-B pipes, ISI marked complete all as specified and directed.MAKE: SUPREME, FINOLEX, PRINCE, DIPLAST. |
| 90 | Disconnectingexc 250 and n exc 500 litres capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position.(cleaningrepairing , etc measured separately). complete all as specified and directed. |
| 91 | Material and labourfor cleaning and removing all scale and dirt, etc fromPVC tanks exc 250but n. exc500 litre capacity tanksfrom mouths of circulating pipes, etc complete all as specified and directed. |
| 92 | Disconnectingexc 500 and n exc1000 litres capacity water tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position.(cleaningrepairing , etc measured separately). |
| 93 | Material and labourfor cleaning and removing all scale and dirt, etc fromPVC tanks exc500but n. exc1000 litre capacity tanksfrom mouths of circulating pipes, etc complete all as specified and directed. |
| 94 | Material and labour for dismantling water tank exc 250 but not exc 500 Litres capacity and removing to store complete all as specified and directed. |
| 95 | Supply and fixing500 litres capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I. |
| 96 | Material and labour for dismantling water tankexc 500 but not exc 1000 Litres capacity and removing to store complete all as specified and directed. |
| 97 | Supply and fixing750 litres capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I. |
| 98 | Supply and fixing 1000 litres capacityrotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I. |
| 99 | Supply and fixing in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as specified and directed. |
| 100 | Supply and fixing in repairs, vitreous China squatting pan, \"Orissa\"pattern, size 580 x 440 mm white with integral foot rest and \"P\" or \"S\" trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specifiedand directed.. |
| 101 | Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), coloured,includingfixing acessories,complete all as specified.MAKE: HINDWAREr equivalent in CERA, PARRYWARE. (Range of colour- Superior colour of CERA) |
| 102 | Supply and fixing in repairs PVC colouredwater closet seat and cover with & including mild steel chromium plated hinging device & rag bolts, complete all as specified and directed.MAKE: CERAor equivalent in HINDWARE, PARRYWARE. |
| 103 | Supply and fixing in repairs, 15 mm bore pillar taps,fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.. |
| 104 | Supply and fixing in repairsVitreouschina wash basin, white, flat back, size 640x450mmexcluding taps,waste , chain and plugand porcelain stopperbut including brackets complete all as specied and as directed by Engr-In-Charge |
| 105 | Supply and fixing, waste coupling PTMT (half or full threaded) (minium weight 32mm/45gms) suitable for dia of discharge pipe 32mm complete all as specified and directed. |
| 106 | Supply and fixing in repairs, Vitreous China Urinal, half stall type, white, (excluding flushing cisternand flush pipe and waste pipecomplete all as specified and directed. MAKE: HINDWARE or equivalent inCERA , PARRYWARE. |
| 107 | Preparation of old treated/decorated surfaces (plastered or unplastered/concrete wall cornices etc by brooming down or steel wire brushing scrapping down smoke soot moulds mass efflorescent salts trading old and greasy spots etc and applying one coat of colour wash complete all as specified and directed by Engineer-in-Charge. |
| 108 | All as per Serialitem No 107 here-in-before but one coat of cement base paint on old treated surfaces of walls incl a coat of wall care putty, including all necessary staging, scaffolding, safety precautions, etc as required to work at any height, complete. |
| 109 | Material and labour for two coat of oil bound distemper on old decorated surfaces of walls including preparation of surfaces by scraping down, filling with putty all holes and cracks and a coat of putty complete all as specified and directed by Engineer-in-Charge.. |
| 110 | Material and labour for one coat of synthetic enamel paint on old painted wooden surfaces of any description exc 10cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.. |
| 111 | Description all as per item No. 110 here-in-before but on old steel surfaces complete all as specified and directed. |
| 112 | Material and labour for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth. complete all as specified and directed by Engineer-in-Charge. |
| 113 | .M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointedwith grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail