|
| 1 | Taking down chowkat with shutter (without taking off shutter from the frame) and area exceeding 1.5 sqm but not exceeding 4 sqm complete all as specified and directed. |
| 2 | All as per item No 1.00 above but not exceeding 1.5 sqm each complete all as specified and directed |
| 3 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed. |
| 4 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 5 | Dismantling of timber boarding any description fixed in any position with nails complete all as specified and directed |
| 6 | Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slab/blankets, any thickness including cover fillets complete all as specified and directed. |
| 7 | Dismantling of timber scantling 40 Sqcm and over in section in any position (framed work) complete all as specified and as directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below above ground level) complete all as specified and directed |
| 9 | Dismantling of plain or corrugated steel sheeting any gauge thickness including neonatal or similar pattern roof covering complete all as specified and as directed |
| 10 | Dimolition of brickwork or stone/ boulder masonry complete all as specified and directed. |
| 11 | Taking up or down steel tubing and connections for 15 mm bore of pipe complete all as specified and directed |
| 12 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 13 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed. |
| 14 | Removal of excavated material not exceeding 50m and depositng where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.. |
| 15 | Material and labourfor PCC(1:4:8) type C-2 using 40 mm graded stone aggregate as in foundations, fiiling and mass concrete etc complete all as specified and directed.. |
| 16 | Material and labour moorum filling in floors laid in lagers n.exc 15cm thick spread levelled and rammed including Watering complete all as specified and directed. |
| 17 | Material and labour hardcore of gauge n exc 63mm diposited, spread and levelled in lagers n exc 15cm thick, watered and rammed to a true surface with broken stone complete all as specified and directed. |
| 18 | Material and labourfor PCC(1:4:8) type D-2 using 40 mm graded stone aggregate as in base flooring complete all as specified and directed. |
| 19 | Material and labour 75 mm thick PCC 1:3:6 type C-2 (40mm graded agg) as in sub flooring complete all as specified and directed. |
| 20 | Material and labour 40 mm thick PCC 1:2:4 type B-1 (20mm graded aggregate) as in flooring with glass strip finishing cement concrete surface even and smooth without using extra cementcomplete all as specified and directed. |
| 21 | Material and labour fornon skid coloured ceramic tiles 7 to 8 mm thick (suare/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles Including15mm thick screed bed or bedding layer in cement mortar(1:6) for laying floor finishes complete all as specified and directed. |
| 22 | Material and labour forglazed ceramic tiles in vertical surface 350X250X7mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thickin cement mortar(1:4) for fixing wall tiles complete all as specified and directed. |
| 23 | Material and labour for 75 mm thick cement concrete as in plinth protection typeC-2, 1:3:6 (using 40mm graded aggregate) finishing concrete surface even and smooth with without using extra cement complete all as specified and directed. |
| 24 | Material and labour for PCC(1:3:6), type C-2, using 40 mm graded aggregate in surface channel and drain including nasessary form work complete all as specified and directed. |
| 25 | Material and labour Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, mould, mitred stop ends etc complete all as specified and directed. |
| 26 | Material and labour Precast cement concrete blockmasonry with solid block masonry (1:3:6) type D2 (Using 20mm graded aggregate) exc 10cm in width or girth and setting CM (1:6) complete all as specified and directed. |
| 27 | Material and labour to rendering 15mm thick in cement mortar (1:4) finishing even and smooth without using extra cement, on wall surface with integral water proofing compound, complete all as specified and as directed.Note:-WPC to be measured and paid seperately. |
| 28 | Material and labour for 10 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed. |
| 29 | Supply only water proofing compound complete all as specified and directed. |
| 30 | Material and labour preparation of new plaster surfaces and applying two coat of distemper on walls over a primer complete all as specified and directed. |
| 31 | Material and labour for Preparation new plastered surfaces of wall and applyingtwo coats of cement base paint over a primer complete all as specified and directed. |
| 32 | Supply and fixing of roof truses (framed),trussed, purlins, cran gantries, rails and fastening 9beam,tee,angle,channel or flat section) including distance pieces, cleats etc( using Fe 410-W 9gde e-250) quanlity-A complete all as specified and directed. |
| 33 | Material and labour for preparing to new steel surface and applyingtwo coats of synthetic enamelpaint over a coat of red oxide complete all as specified and directed. |
| 34 | Supply and fixing of Pre-painted galvalume aluminium zinc coatting GI base corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 35 | Supply and fixing of Pre-painted galvalume aluminium zinc coatting GI base plainsteel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 36 | Supply and fixing of solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain co lour PVC sheet reinforced with M.S square tube, fixed in opening as per specification & drawing shown in section 8 of SSR Part II complete all as specified & directed. |
| 37 | Supply and fixing of 30 mm thick factory made solid panel PVC doorshutters consisting of frame made out of M.S tubes for top& bottom rails M.S frame shutters shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet trip of 20mm width stuck inside with solvent cement for stiles and plain co lour PVC sheet for top lock rail and bottomrail on either side and as gap insert for top rail with suitable and bottom rails .Paneling of plain co lour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles and rails with suitable PVC sheets beading and jointed together with solvent cement and fixing in the frame at site as per specification & drawing shown in section 8 of SSR Part II. |
| 38 | Supply and fixing of 100mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 39 | Supply and fixing of 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 40 | Supply and fixing of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 41 | Material and labour for RCC M-25 design mix (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 42 | Material and labour for RCC M-25 design mix (20mm graded aggregate) as in beam, cantilivers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 43 | Material and labour for RCC M-25 design mix (20mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 44 | Material and labour for RCC M-25 design mix (20mm graded aggregate) as in Slab and similar works supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 45 | Material and labour for RCC M-25 design mix (20mm graded aggregate) as in Chajja and similar works supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 46 | Material and labour for TMT bar 10 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) complete all as specified and directed. |
| 47 | Material and labour for TMT bar 8mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) complete all as specified and directed. |
| 48 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed. |
| 49 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed. |
| 50 | Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions squre, rectangular or polygonal, complete all as specified and directed. |
| 51 | Material and labour for formwork to soffits of suspended slabs such as roof chajja floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. . |
| 52 | Material and labour for use and waste for form work for rought finished surface of concrete to edges of concrete flats,treads, breaks in floors,window cills, concrete railing , openings in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls, horizantal or sloping complete all as specified and directed. |
| 53 | Material and labour for anodised aluminium snap frame work for false ceiling complrising GI perimeter channel 0.55mm thick with main T-flange of 20mm and web of 30mm fixed to surrounding wall flange using nylon sleeves and ss screwsand web 20mm each , crossed T with flange 20 mm and web 20 mm fixed to main T. main T is suspended from soffit at approx 1200 mm center to centre with GI wire of 6mm dia , cleat and steel expansion fasteners, GI frame shall be 600mmX600mm and laid/inserted 4mm thick nonasbestos fibre cement building boardto aluminuim frame as in ceiling complete all as specified and directed. |
| 54 | Supply and fixVitreous China wash downwater closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 55 | Supplyand fix as inrepairVitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed. |
| 56 | Supplyand fix15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 57 | Supplyand fix CP bib tap 15 mm bore, fancy type, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. |
| 58 | Supply and fixing of 15mm bore stop cock , fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. . |
| 59 | Supplyand fix PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed. |
| 60 | Supply and fixing of PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 61 | Supply and fixing of 600mmx450mm bevelled edge mirror ofselected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 62 | Supply and fixing of Health Faucet (ABS) with 120cm PVC flexible tube & ABS wall hook complete all as specified and directed. |
| 63 | Supply and fixing of shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour (mininum weight 40gms) complete all as specified & directed. |
| 64 | Supply and fixing of Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 65 | Supply and fixing of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 66 | Supply and fixing of Anodised aluminium window shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 67 | Supply and fixing of 4.8 mm thick sheet glass aobscured or on one side good quality excedding 0.5 sqm in each pane complete all as specified and directed. |
| 68 | Material and labour for 2nd class hard wood clean sawn, plain 20mm thick or weather edged 15mm to 20mm thick &fixed with 30mm lap complete all as specified and directed. |
| 69 | Supply and fixing of Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),complete including providing and fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. with grating and union for discharge pipe complete all as specified and directed. |
| 70 | Supply and fixing of 600 mm long PVC flexible Waste pipe to WHB/urinals/Sink complete all as specified and as directed. |
| 71 | Material and labour for two coats synthetic enamel paint over a coat of pinkwood primer on wood surfaces of any description not otherwise described over 10 cm including preparation of newor previously untreated surface complete all as specified and directed. |
| 72 | Supply and fixing of 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors etc complete all as speicified and directed. |
| 73 | Supply and fixing of 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors etc complete all as speicified and directed. |
| 74 | Supply and fixing of rotational moulded polythene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) ISI marked hosted and fixed in position MES Schedule 2009, Part – I, complete all as specified and directed. |
| 75 | Supply and fixing of PVC(SWR) sewage pipe 110 mm dia single socket in any length with rubber ring joints fixed to wall or floor complete all as specified and directed. |
| 76 | Supply and fix,as in repairPVC (SWR ) Bend 110mm bore complete all as specified and directed. |
| 77 | Supply and fixing of PVC (SWR) vent cowl 110mm dia complete all as specified and directed. |
| 78 | Supply and fix gun metal gate valve with iron wheel head, screwed both ends 50mm complete all as specified and directed. |
| 79 | Supply and laying of GI pipe 50mm dia, medium grade complete all as specified and directed. |
| 80 | Material and Labour for Point wiring with two single core 1.5 sqmm (nominal area), FRLSH, ISI Per point 20 marked PVC Insulated unsheathed multi-stranded copper cable, 1100 volts grade including PVC conduit (medium grade) of suitable size with all fittings and accessories including sheet metal enclosure and hylam sheet for mounting switch socket of suitable size, and FRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed |
| 81 | All as per Item No. 80.00 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board complete all as specified and directed. |
| 82 | All as per Item No. 80.00 here-in-before but for one 2/3 pin socket outlet, 5 Amps on same board complete all as specified and directed. |
| 83 | All as per Item No. 80.00 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multi-stranded copper cable of size 2.5 sqmm for one power point 3 pin 15 Amps on independent board including FRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 84 | Supply and fixing switch piano flush type 5 amps single pole one way complete for one light/fan point controlled by one switch complete all as specified and directed. |
| 85 | Supply and fixing socket outlet 2 in 1, 3 pin, 6A for same board points all as specified and directed |
| 86 | Supply and fix switch socket combination (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and directed. |
| 87 | Supply and fix switch socket combination (ISI marked) 2/3 pin and 15 Amps, flush type, 240 volts complete all as specified and directed. |
| 88 | Supply and fix single pole and neutral metal clad box enclosure with a two pin and earth plug and socket complete with one 20 A, \"C\" curve single pole MCB all as specified and directed. |
| 89 | Supply and fix ceiling rose surface type 65 mm x 50 mm, 3 terminal complete all as specified and directed. |
| 90 | Supply and fixing LED lights fitting 1x 18W, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 91 | Supply and fix recess mounted low glare LED luminaire 35/36 Watt 2 x 2 ft 6500 K complete with all accessories all as specified and directed. |
| 92 | Supply and fix MCB Distribution board, VTPN, loadline, double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 415 Volts 4 way suitable for MCB as incomer fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed |
| 93 | Supply and fox MCB Distribution board, 240 volts single pole and neutral,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed |
| 94 | Supply and fIx MCB, SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity \"C\" series, AC complete all as specified and directed |
| 95 | Supply and fix in repair MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity \"C\" series complete all as specified and directed. |
| 96 | Supply and fixing MCCB of Capacity 63 Amp, 4 Pole, 415V 16kA fixed thermal and fixed magnetic trip circuit all as specified and directed. |
| 97 | Material and labour for sub main wining with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH, ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC conduit of suitable size complete all as specified and directed. Note:Two run of 6.0 sqmm cable + one run of earth wire of 6.0 sqmm + one run of PVC conduit shall be measured as one unit. |
| 98 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
| 99 | Supply and fix water heater storage capacity 25 ltrs, BEE 5 star rated type including connection pipes and all accessories all as specified and directed |
| 100 | Supply and fixing PVC Exhaust fan 250 mm 230 Volts Ac single phase with louvers Complete all as specified and directed |
| 101 | Supply and laying sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (8cm under the cable & 15cm over the cable) and gently punned down to 18cm thickness all complete as specified and directed. Note:- Only punned down sand shall be measured. |
| 102 | Material and Labour for bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed. |
| 103 | Supply, laying and testing of XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 Core all as specified and directed |
| 104 | Supply and fix Air termination, single pointed, Aluminium rod 12mm dia and 300mm long complete all as specified and directed. |
| 105 | Supply and fix Aluminium strip 25 mm x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed |
| 106 | Supply and fix Galvanised iron strip 32 x 6mm buried in ground as ring main conductor including porcelain insulated clamps complete all as specified and directed |
| 107 | Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal, head screw complete all as specified and directed. |
| 108 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead strip 32x6 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 40 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
