Military Engineer Services-MES has published Tender For Repairs To Flooring, Roofing, Joinnery, Plumbing, Masonry Other Misc Work For Dad Residential Complex Under Age B/R (South) Bangalore. Submission Date for this Tender is 28-07-2023. Shed Construction Tenders in bangalore Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-07-2023 |
| Sl. No. | Item Description |
| 1 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed of 15mm thick in CM 1:6 & including dismantling of old existing floor tiles incl. removal of debris outside of MOD land etc complete all as specified and directed. |
| 2 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) of size up to 0.04 Sqm cut from same shade and size of floor tiles of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match overand including 10 mm thick rendering in cement mortar 1:4 after dismantling of existing tiles including removal of debris outside of MOD land etc complete all as specified and directed. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge. |
| 3 | S&F Coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat after dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar beddingand removing upto Brick wall surface and removal of rubbish out side the MD land complete all as specified and as directed. |
| 4 | M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade ofcomplete all as specified and as directed. |
| 5 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc after dismantling of old existing floor tiles complete all as specified and as directed.. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge. |
| 6 | S&F Ultra charged Vitrified Coloured Ceramic tiles (light shade) 8-9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade ofcomplete all as specified and as directed.. |
| 7 | S&F ultra charged for Vitrified coloured ceramic tiles (light shade) 8-9mm thick (square/rectangular) area of each tile upto 0.06 Sqm cut from same shade and size of the tile for floor, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4. etc after dismantling of old existing floor tilescomplete all as specified and as directed.. |
| 8 | M&L 18-20 mm thick Graniteblack colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed. |
| 9 | M&L for rendering 15 mmthick in CM 1:4 on fair face of brick or concrete surfaces of wallsfinished even and smooth including taking down, raking out joints, hacking for key, scrubbing down with water etc and applying two coats of cement based paint over a coat primer to match with the existing surfaceremoving rubbish of the premises and disposed off outside the MD land complete all as specified and as directed. |
| 10 | M&L for rendering 15 mmthick in CM 1:4 on fair face of brick or concrete surfaces of wallsfinished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and applying twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmto match with the existing surface and removing rubbish and disposed outside the MD land inclall necessary safety norms to the workers all as specified and directed. |
| 11 | M&L for rendering 10mmthick in CM 1:6 on fair face of brick or concrete surfaces of wallsfinished even and fair Including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish of the premises and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty after preparation of surface complete all as specified and as directed. |
| 12 | M&L for rendering 5mmthick in CM 1:3 on ceiling of concrete surfaces finished even and fair including taking down plaster, raking out joints, hacking for key, scrubbing down with water etc andapplying three coats of white wash on ceilings and removing rubbish of the premises and disposed off outside the MD land complete all as specified and as directed. |
| 13 | M&L for rendering 5mmthick in CM 1:3 on ceiling of concrete surfaces finished even and fair including taking down plaster, raking out joints, hacking for key, scrubbing down with water etc andapplying two coat of oil emulsion distemper over a coat of primerwash on ceilings and removing rubbish of the premises and disposed off outside the MD land complete all as specified and as directed. |
| 14 | M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in roof/Chajjas kerb or mud stops, rounded or chamfered as pading concrete. |
| 15 | M&L for 25 mm thick cement concrete(1:2:4)typeB-0 (using12.5mm graded stone aggregates) as in floor even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L for 10 mm thick screed bed or bedding layer in cement mortar 1:4 on floor/roof /Chajjas surfaces mixed with liquid WPC @ 200 ml per bag of cement finished the surfaces even and fair all as specified and as directed.(Cost of WPC will be included in the rate and will not be measured Separately) |
| 17 | M&L for cleaning the plastered/concrete surfaces of roof with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) M&L 3 mm thick APP modified water proofing memebrane as per IS 16540/16532-2017 weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish laid with 100 mm overlap in lognitudinal and transfer direction over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqmincluding dismantling of old water proofing treatment and roof tiling including screed bed or any type of treatment and cleaning the surface with wire brushes removing dust, foreign material and rubbish off the same out side the MD land complete all as specified. |
| 18 | Removal of vegetation/tree growth etc on external surface of walls or on roof top in two/four storey building by taking all necessary precaution to the workers and also the adjacent govt properties including digging out of filling holes with PCC 1:2:4 type B1 using (20 mm graded stone aggregate) and finishing the surface to match adjacent surfaces after application of suitable chemical using " break" manufactured by M/S denocil company or equivalent to avoid re growth of the vegetation and removing the debris to outside the MD land complete all as specified and directed(Any damage to the adjacent govt properties like glass windows , pipes lines etc to be made good without any extra cost ) for plants girth not exc 5 cm |
| 19 | All as above item No 18for plants girth exc 5 cm and n.exc 15 cm |
| 20 | Disconnecting existing tanks exc 250 ltrs and n.exc 500 ltrs capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 21 | M&L for Demolition of un reinforced cement Concrete of any description and in any position not otherwise specifically provided for sunken slabs |
| 22 | M&L for PCC 1:5:10 E2(40 mm graded stone aggregates) for sunken slabs |
| 23 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4finished even and smooth surfaces (without using extra cement) includingcomplete all as specified and as directed. |
| 24 | Demolishingreinforced cemet concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including cutting of reinforcement |
| 25 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 26 | S&F rectangular/Square hollow mild steel section as in purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc |
| 27 | Cutting chases, pinning in, stone concrete block or slabs wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth and removal of debris otside of MOD land complete all as specified. |
| 28 | S & Fof CPVC pipes 25mm Incl. SDR 11Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of 20 mm GI pipe complete all as specified. |
| 29 | S & F of CPVC pipes 20mm all SDR 11 Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking downof 15 mm GI pipe complete all as specified. |
| 30 | S&Fin repair20mm dia CPVC brass elbow complete all as specified and as directed. |
| 31 | S&F in repair20 mm dia CPVC Brass Tee complete all as specified and as directed. |
| 32 | S&F in repair 20mm dia female/male brass threaded adapter complete all as specified and as directed. |
| 33 | S&Fin repair 15 mm CP extension nipple complete all as specified and as directed. |
| 34 | Cleaning of air lock in GI/CPVC/UPVC pipe 15/20/25 mm and making the water supply available upto water taps including taking down and refixing of pipes attending the complaints of no water supply & rectifying defects in water supply lines complete all as specified. |
| 35 | S & F PVC(SWR) pipes 110mm dia single socketed in any length with rubber ring jointsfixed to walls fixed with PVC straps or clipsincluding dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 36 | S&FPVC (SWR) pipes75 mm size in bore single socketed , in any length with rubber ring joints, fixed to walls fixed with PVC straps or clips including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 37 | S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 38 | S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including dismantling and breaking of pipe and fittings complete all as specified and as directed. |
| 39 | S&F in repair PVC bends anyradius75mm dia complete all as specified and directed. |
| 40 | S&F in repairPVC bends any radius 75 mm dia with access door complete all as specified and directed. |
| 41 | S& F in repairPVC bends anyradius 110mm dia complete all as specified and directed. |
| 42 | S&F in reapir PVC bends any radius 110 mm dia with access door complete all as specified and directed. |
| 43 | S&F in repair PVC Single T any radius 110 mm dia complete all as specified and directed. |
| 44 | S&F in repair PVC Single T any radius 110 mm dia with access door complete all as specified and directed. |
| 45 | S&F in repair PVC (SWR) 75 mm branch piece,double (double Y)equal or unequal complete all as specified and directed. |
| 46 | S&F in repair PVC (SWR) 110 mm branch piece,double (double Y ) equal or unequal complete all as specified and directed. |
| 47 | Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area n. exc 150 Sqcm complete all as specified and as dircted. |
| 48 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work forwindows, ventilatorswith extruded built up standard 2/3 track sliding section of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified. |
| 49 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work forventilatorswith extruded built up standard rectangular/square section including PVC strips for holding of louvers of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified. |
| 50 | S&F powder coated Anodised aluminium sliding windowshutter type without sash bars, aluminium sections weighing 0.55 kg/m including powder coating of any colour ,thickness not lessthan 50 microns necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary locking arrangement and roller complete all as specified |
| 51 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed. |
| 52 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and directed. |
| 53 | Taking down of shutter exc 1.0 sqm but n.exc 2.0 Sqm each |
| 54 | S&F solid PVCdoor frame of size 50mm x 47mm made out of 5mm wood grain printed PVCsheet and edges will be painted to match with printed sheet, reinforced with MSsquare tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.) |
| 55 | S&F Factory Made Solid PVC Moulded Door Shutter,with particle board 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing |
| 56 | S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.complete all as specified |
| 57 | S&F 35 mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass , gauge etc, with plain, chamfered or rounded, mitred and rebated sash bars, any number of squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain chamfered |
| 58 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 59 | Repairs to existing steel window / Ventilatorhinges by means of replacing the old hinge with box type and welded to steel shutter and frame , easing the shutter,and making good the surface finsh to matchextg wall surface complete all as specified and directed(G+5 Storey bldgs) |
| 60 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE-410-W Gde-E-250 Quality A |
| 61 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 62 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zincchrome primer complete all as specified and as directed. |
| 63 | S&F stainless steel 100 mm butt hinges for doors complete all as specified. |
| 64 | S&F 150 mm size extruded aluminium alloy handles for doors fabricated type anodized complete all as specified. |
| 65 | S&F 150 mm long aluminium anodized barrel tower bolts for PVC doors and windows of extruded section complete all as specified. |
| 66 | S&F 200 mm long aluminium anodized barrel tower bolts for doors of extruded section complete all as specified. |
| 67 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified. |
| 68 | S&F for floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel springfixed to dooroverall length of cover plate 150mm complete all as specified |
| 69 | S&F mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified. |
| 70 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 71 | S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified. |
| 72 | S&F sheet glass ordinary quality 4mm thick insquare not exc 0.50 Sqm each pane glazingwith oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified. |
| 73 | S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified. |
| 74 | S&F in repairs 150 mm long aluminium anodized barrel tower boltsfor PVC doors of extruded section complete all as specified. |
| 75 | S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified. |
| 76 | S&F in repairs 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified. |
| 77 | S&F in repairs mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified. |
| 78 | S&F in repair floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel springfixed to dooroverall length of cover plate 150mm complete all as specified |
| 79 | S&F in repairStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/screws with bolt and nut complete all as specified. |
| 80 | S&F in repairs sheet glass ordinary quality 4mm thick insquare not exc 0.50 Sqm in each pane glazingwith oil putty, clip in metal frame and wooden beading in wooden frameincluding hacking out of old broken glass complete all as specified. |
| 81 | S&F in repairs4 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed. |
| 82 | Resecuring or Easing and adjusting without taking down of shuttern. exc 1 Sqm n exc 2 Sqm complete all as specified and as directed |
| 83 | S&F in repairs 2nd class hard wood plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads , sectional area exc 3 Sqcm and not exc 6 Sqcm including two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified. |
| 84 | S&F in repair 25mm dia stainless steelcurtain rod including 2 Pair of fancy typebrackets/corners ,fixed with 45mm long mild steel screws complete all as specified |
| 85 | S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) "P" or "S" trap including dismantling of old Water closet complete all as specifed and as directed. |
| 86 | S&F in reapair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe .complete including making good to floor with complete all as specified |
| 87 | S&F in repairs plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed. |
| 88 | S&F in repairPVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, handle, bracket PVC short/long bend etc. complete all as specified and directed |
| 89 | S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type/ Pedstal type WC complete all as specified. |
| 90 | Petty repairs to leakinglow level or high level flushing cistern by adjusting the float valves, internal fittings and including removal and replacement of rubber washer in PVC siphons, leaking PVC bends/GI pipes etc. complete all specified and directed by Engineer in charge |
| 91 | S&F in repairs PVC internal fittings (ie syphon) for low/high level flushing cistern complete all as specified. |
| 92 | S&F in repairs PVC connection 15 mmsize, 60 cm long with PTMT adopter,check nutsand washer on both sides for cold water complete all as specified. |
| 93 | S&F in repairvitreous china wash hand basin, white,flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 94 | S&F in repair 32 mm dia PVC collapsiblewaste pipe for WHB/Kitchen sink complete all as specified. |
| 95 | S&Fin repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 450mm*600mm complete all as specified and as directed |
| 96 | M&L in repairs 32mm dia Waste coupling, brass, chromium plated for SS Kitchen sinks, WHBetc. with long screwed shanks and fly-nuts, flange end beddedinred leadcement and other end fixed complete all as specified. |
| 97 | S&F in repairsBib tapcast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe. |
| 98 | S&F in repair, bib taps, brass, fancy type, long body, chromium platedfor 15 mm borepipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 99 | S&F in repair 15 mm bore diameter brass CP wall mixer any type complete all as specified and as directed. |
| 100 | S&F in repair pillar taps, brass, with capston heads, fancytype, chromium plated, screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and flynuts screwed for 15mm bore iron pipe, complete all as specified and directed. |
| 101 | S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete,all as specified and directed . |
| 102 | S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated,completeall as specified and directed . |
| 103 | S&F in repairbrass spindle for pillar taps, stop valves, bib taps, angle valves, concealed stop cocks & wall mixer cockfor 15mm by changing jumper valves, washers etccomplete all as specified |
| 104 | S&F in repairs over head shower chromium plated 95 mm diawith 3 flow with SS over head shower arm of180mm with flange complete all as specified and directed. |
| 105 | S&F,in repairs 15mm size health faucet, ABS body ,with wall hook and 1 metrestainless steel braided rubber hose pipe complete all as specified and as directed. |
| 106 | S&F in repairs brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified. |
| 107 | S&F in repairs100mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement with dismatnling of old nahani trap with necessary PCC/ cement work complete all as specified and as directed. |
| 108 | S&F in repairs75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cementwith dismatnling of old nahani trap with necessary PCC/ cement work complete all as specified and as directed. |
| 109 | S&F Cabinet Mirrorof size 300mmx450mmmirror of selected qualityfixed in wall with screws complete all as specified and directed. |
| 110 | S & F in repairs looking mirror of 5 mm thick 500mmx700mm with double coat for protection and longevity grounded edges for safety and silver plating on the back for better refelection and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 111 | S&F in repairs Glass corner shelf including CP railing, radius 300 mm complete all as specified and directed by the Engr-in-Charge. |
| 112 | S&F in repairtubular towel rail 600 mm long of brass chromium plated 20 mm dia D type fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified. |
| 113 | S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismatling of existing one all as specified |
| 114 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismatling of existing one all as specified |
| 115 | S&F in repairs CPVC ball valve 20 mm internal dia complete all as specified and as directed |
| 116 | S&F in repairs CPVC tank union20mminternal dia complete all as specified and as directed |
| 117 | S&F Tank adapter 20 mminternaldia complete all as specified and as directed |
| 118 | S&F 20 mminternal boreBall valve high pressure of PTMTwith epoxy coated Aluminiumrod& high density PVC Plastic ball screwed for iron pipe (Minimum weight 20mm-210gms)complete,fixed in repairs, all as specified. |
| 119 | S&F 20 mm internalbore tank nipple suitable for HDPE water tank. (Min wt 45 gms). |
| 120 | S&F in repairs HDPE PVC lid (cover) for 500 ltrs/1000 ltrs capacity PVC tank complete all as specified. |
| 121 | Materials and labour for cleaning of water tanks of capacity exceeding 250 litres and not exceeding 500 litres including cleaning of bottom and internalsurfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paintcomplete all as directed. |
| 122 | Materials and labour for cleaning of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres including cleaning of bottom and internalsurfaces by brushing with nylon brush, removing all deposits/ scales, silt /other sticky or foreign materials from adhering surfaces and washing inside surfaces of water tanks with approved quality of bleaching powder solution and finally re cleaning with fresh plain water thoroughly to remove all the trace of bleaching powder and draining out the collected water including writing date of cleaning on water tanks with enamel paint complete all as directed. |
| 123 | S&F for Providing and erecting at site self supported steel H- Frame Scaffolding only for structural repairs of column,beams, chajjas, balconys, fins/facaias with cross bracings of good quality without dents and corrosion to reach place of work including approches extension working platform ladders, lifting tackel necessary wall anchores for men and materials till completion of all structural repair items of work and curing period etc. complete. The workshould be caried out with all the safety belt and adequate labourinsurance under the supervision of qualified supervisor. This item shall be used only for structural repair work for entire period of building. ( Payment shall be made only once irrespective of duration of scaffolding.) etc. complete |
| 124 | M&L for Breaking carefully the loose concrete of distressed member without damagingexisting strong concrete by means of sharp chisel which should tampered regularly of high frequency low impact hammer is used, cleaning the surface bywater jet pressure pump at 4 to 5 kg/ sqcm pressure to remove chlorides and loose particles , air dryingthe surface etc. The work should be carried out with all the safety measures like helmet , safety belt and adequate labour insurance under the supervision of qualifed supervisor. etc. complete |
| 125 | Providing anderecting steel tubular props of requried heightupto 14" feet, L head or flat head braced at center and supporting a continuous 2"* 3" wooden runner , resting on wedge and block minimum capacity 3 Ton to support the structure provisionally during repair and jacketing etc. and maintaining them in position till requried item etc. complete. The propsare erected in perfect vertical in plumb taking /transferring the load equally/ uniformly . The location of every prop should be one over anotherfloor and it shouldnot be eccentric.The tightening of every prop should be uniform to all props to strain the building uniformly, removing the same as and when directed by sturctural engineer/ site Engineer. The work should be carried out with all the safety belt and adequate labour insurance under the supervision of qualified supervisor and remove the same on completion of work etc. complete all as specified and as directed. |
| 126 | M&L for Cleaning the existing reinforcement withhammer tapping and wire Brush/ rotary wire brush , fixed to hand drill machine, makingthe surfaces free form loose corrosionmaterial, dirt scalling etc. complete.Applying two coats of polymer basedalkaline rust converting primer confirming toASTM-B 117 by means of paint brush,liberally all over in two coats of 1 hourbetween the coats, The product shouldconverts the rust in to stable organo metalliccomplex molicule layer, this should also actas primer to further treatment of steel etc.complete. The work should be carried outwith all the safety belt and adequate labourinsurance under the supervision of qualifedsupervisor etc. complete all as specified and as directed. Make: Sika, SP Concare, Chembond, Krishna Conchem, Fosroc Chemicals - Reebaklens RR, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd. |
| 127 | M&L forapplying two coats of concrete penetrating hi- tech corrosion inhibition mechanism inhibits corrosion of steel in concrete at the poles, cathode & anodic simultaneously on concrete surface which is prepared earlier. The work sholud be be carried out with all the safety measures like helmet , safety belt and adequate labour insurance under the supervision of qualified supervisor. ( The damage ceiling/ concrete shall be measured) etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem, FOSORC Chemicals, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd. |
| 128 | Providing and applying approved epoxy resinbefore polymer plaster/ concrete to have the perfect bond between old concrete and new concrete/ polymer plaster surface confirming to ASTM-C- 882-87 using nylon brushes scaffolding labour etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem,Fosroc Chemicals, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd. |
| 129 | Making up lost section of concrete / mortor with 45-50 mm thick thixotropic repair mortor is one component thixotropic dual shrinkage compensated fiber reinforcement formulation for structural members. Build up section by hand packing as per manufacturers specfication , applied by meanof hand glouse by expert applicator, the rehabilated surface should be free from air gaps, voids should be in line with existing requried line and line with existing surface,including curing, cleaning the area etc. complete. The work should be carriedout with all the safety measures like helmet, safety belt and adequate labour insurance under the supervision of qualifed supervisor etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem, Fosroc Chemicals - Renderoc HS Xtra, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd. |
| 130 | Providing and applying 25-30 mm thick polymer mortar to load carrying R.C.C member in two layers in proportion of 1:5:15 by weight with polymer of approved quality and make, cement and wash quartz sand with requried W.C. ratio for desired floating, curing after initial setting time etc. complete. Make: Sika, SP Concare, Chembond, Krishna Conchem, FOSORC Chemicals, Dr. Fixit, ROFF, CICO, BASF, Hilti/Fischers, Sunanda Speciality Coatings Pvt. Ltd. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
