Military Engineer Services-MES has published Tender For Provn Of Guard Room, Overhead Shed, Rcc Septic Tank, Chain Link Fencing And Ro Plant At Certain Units Of Hq 12 Sect Rr Under Age B/R (P) & Age (E/M) Of Ge 861 Ews.. Submission Date for this Tender is 22-07-2023. Building Work Tenders in Anantnag Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Jul-2023 | REVISED BOQ | BOQ | 22-07-2023 |
| 2 | 11-Jul-2023 | EXTENSION OF CRITICAL DATES | Date | 22-07-2023 |
| Sl. No. | Item Description |
| 1 | Surface dressing n exc 15 cm deep and getting out in soft/loose soil, complete all as specified and directed. |
| 2 | Excavation over areas not exc 1.5m depth and getting out in any type of soil, complete all as specified and directed. |
| 3 | All as per srl item No-2 here in above but exc 1.5m & n.exc 3.0m in depth. |
| 4 | Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shaft wells, cesspits manholes pier holes etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed. |
| 5 | Excavation in post holes (or similar holes) each n.exc. 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m, in any type of soil and making good surfaces, complete all as specified and directed. |
| 6 | Returning filling in (soil) including spreading, levelling , watering and well ramming in layers n exc 25cm thick, complete all as specified and directed. |
| 7 | Removing of surplus soil to a distance n exc 50 mtr and depositing where directed ata level n exc 1.5 mtr above the starting point, complete all as specified and directed. |
| 8 | PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified. |
| 9 | RCC M-25 design mix using 20 mm graded aggregatein foundations, including rafts, footings, foundation beams, plinth beams, base for columns, etc basements slabs under rammed piles and mass concrete complete all as specified and directed. |
| 10 | RCC M-25 design mix using 20 mm graded aggregate as in beams, cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed. |
| 11 | RCC M-25 design mix using 20 mm graded aggregate in column, pillars, piers, posts and struts complete all as specified and directed. |
| 12 | RCC M-25 design mix using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | RCC M-25 design mix using 20 mm graded aggregate in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 14 | Form work to sides of concrete foundations, footings, bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed. |
| 15 | Form work to sides and soffits of floor or roof beam haunching , lintels, cantilevers shelved including supports overhangs etc also splays between floors and beams, etc complete all as specified and directed. |
| 16 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finish surface of concrete square, rectangular or polygonal complete all as specified and directed. |
| 17 | Form work to sides and soffits of suspended slab such as roof slab, floor slab, shelves and similar works n. exc. 200 mms thick (Horizontal or sloping), finishing rought the concrete surfaces, complete all as specified and directed. |
| 18 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and directed. |
| 19 | MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming tocomplete all as specified and directed. |
| 20 | MS TMT Bars of 5 mm dia and overup to 10 mm diain stirrups, spacers and binders, cut to length bent to shape requiredincluding cranking, bindingspirally for hooping for columns hooking ends and bindingwithand including MS wire annealed not less than 0.9 mm dia or securining with clip complete all as specified and directed. |
| 21 | Hard core of broken stone or boulders of guage n. exc 63mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface,complete all as specified and directed. |
| 22 | Brick work with sub class "B" bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:4, complete all as specified and as directed. |
| 23 | Walling of random rubble masonry with best quality stone, uncoursed, well bonded, bedded and solidly hearted and built in CM 1:4, all as specified. |
| 24 | Precast cement concrete type C-1(using 16mm graded crushed stone aggregate) hollow block masonry with hollow blocks exceeding 10cm in width and setting in mortar 1:6, complete all as specified and directed. |
| 25 | Precast cement concrete type 1:2:4, type-B1 (20 mm graded aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set and jointed in CM 1:4, complete all as specified and directed. |
| 26 | PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in surface channel and drains, complete all as specified and directed. |
| 27 | Extra for forming fair finished drain or channel 90cm inner girth in cement concrete using extra cement including forms, moulds, mitered / stopped ends etc., complete all as specified and directed. |
| 28 | 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 29 | 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 30 | 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement mixied with water proofing compound in the proportion as mentioned in manufacture"s instructions complete all as specified. NOTE: Water proofing compound shall be measured and paid separately. |
| 31 | Supply only liquid water proofing compound of approved quality, complete all as specified and directed. |
| 32 | Plain cement concrete M-10, 1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate, 75mmthick, as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified and directed. Note:- The unit rate include for use of form work (straight or curved). |
| 33 | 75mm thick PCC 1:3:6 Type C-2 (40 mm graded stone aggregate) as in sub-base of floors, complete all as specified and directed. |
| 34 | PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. |
| 35 | Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed. |
| 36 | Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry,pointed in white or coloured cement to matchover and including 10mm thick renderingin cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 37 | Chequered coloured cement concrete tiles of size 200 x 200 x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 38 | Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 39 | Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed and including 10mm thick renderingin cement mortar 1:4 to receive, complete all as specified and directed. |
| 40 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed. |
| 41 | Rolled mild steel in roof trusses (framed), trussed, purlins,crane girders,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed. |
| 42 | Rolled mild steel in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240, complete all as specified and as directed. |
| 43 | Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivering, etc., and similar work confoming to FE-290 Gde E-165 including taking out old posts of any description all as specified and directed. |
| 44 | Supply only MS galvanised chain link fencing, any size or type, complete all as specified and directed. |
| 45 | Fixing only 4mm dia galvanised steel wire(Chain Link) 50x50mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed. |
| 46 | Mild steel bolts n exc 12 mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexogonal or square not exc 30 cm long complete all as specified and directed. |
| 47 | Galvanised , 2 strand , steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs, 75 mm spacing and strainingand fixing to any type of standard rails and straining bolts, including securingor tyingat crossings with and provision of galvanised mild steel wire complete all as directed. Note:(Each line of wireto be measured) |
| 48 | MS round bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips conforming to Fe-410-W (Gde-E-250) quality-A,complete all as specified and directed. |
| 49 | Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. |
| 50 | Factory made solidpanel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVCchannel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed. |
| 51 | 35mm thick, 2nd class hardwood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003(Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed. |
| 52 | 30mm thick, 2nd class hardwood (Sal/ Hollock) factory made glazed and skeleton shutters,open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges offraming plain, chamfered or rounded, fitted with cut &mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-ISection-8,clause 8.24 (b) for door shutter supplying and fitted to chowkats, complete all as specified and directed. |
| 53 | 2nd class hardwood, plain, solid, straight chowkats and frames, wrought, framed, worught, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 54 | 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame, complete all as specified and directed. |
| 55 | 2nd class softwood plain fillets square/rectangular or triangular in section of sectional area exc 13 Sqcm but n exc 25 Sqcm, complete all as specified and directed. |
| 56 | 2nd class softwood plain fillets bull nosed splayed chamfered or rounded on one edge or face in section of sectional area exc 6 Sqcm but n exc 13 Sqcm, complete all as specified and directed. |
| 57 | Pre-painted galvalume aluminium zinc coating GIbased corrugated steel sheet 0.50 mm thick of ancolour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. |
| 58 | Pre-painted galvalume aluminium zinc coating GIbased plain steel sheet 0.50 mm thick of any colour as approved having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. |
| 59 | 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 60 | 125mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 61 | 150mm long, extruded aluminium alloy handles, fabricated type, anodised, all as specified and directed. |
| 62 | 125mm long, extruded aluminium alloy handles, fabricated type, anodised, all as specified and directed. |
| 63 | 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 64 | 75mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 65 | 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 66 | Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples,complete all as specified and directed. |
| 67 | Steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 68 | Steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 69 | 32mm bore 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 70 | Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball, complete all asspecified and directed. |
| 71 | Vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron "P" or "S" trap,jointing to flush pipe, complete all as specified and directed. |
| 72 | Vitreous china, wash hand basin, white, flat back, of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, complete all as specified or erecting stand including 32mm waste fittings, chromium plated with long screwed shanks & fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 73 | Vitreous china bowl urinal flat back, size 465 x 355 x 265 mm, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with grating and union for discharge pipe, complete all as specified and directed. |
| 74 | 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets,complete all as specified and directed. |
| 75 | PVC connection 15mm size with PTMT nuts of length 600mm,complete all as specified and directed. |
| 76 | 15mm bore bib tap, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,complete all as specified and directed. |
| 77 | 15mm bore stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union, complete all as specified and directed. |
| 78 | 15mm bore pillar tap, copper alloy, with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed. |
| 79 | 15mm bore concussive push button taps of cast copper alloy, screwed for iron pipe and fixed, complete all as specified and directed. |
| 80 | Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed. |
| 81 | 100mm dia grating doom of PTMT,complete all as specified and directed. |
| 82 | 175mm to 250mm cast iron or mild steel peg set, solid body,complete all as specified and directed. |
| 83 | 32mm dia waste coupling of PTMT (half or full threaded),complete all as specified and directed. |
| 84 | Looking mirror of size 600mmx450mm bevelled edge mirror of selected quality glass 5.5mm thick, mounted on 6mm thick AC building board or commercial ply wood with PVC or aluminium "C" channel beading all around and fixed to wooden plugs with chromium plated brass screws and cup washer, complete all as specified and directed |
| 85 | Supply, fixing, jointing and testing, 20mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed, complete all as specified and directed. |
| 86 | 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed. |
| 87 | 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc, complete all as specified and directed. |
| 88 | 110mm bore dia PVC (SWR) reducer, complete all as specified and directed. |
| 89 | 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 90 | 110mm bore pipe PVC (SWR) vent cowland fixed, complete all as specified and directed. |
| 91 | 75mm bore pipe PVC (SWR) vent cowland fixed, complete all as specified and directed. |
| 92 | Elastic bio-digester LLDPE septic tank commercial grade with inlet, outlet and air vent designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection to drain pipe etc. for 10 users, complete all as specified and directed. |
| 93 | Construction of soakage well, excavation in any type of soil, foundation PCC 1:3:6 wells of honey combed and solid in M-25 concrete, including intercepting chamber chamber screen chamber, brick work in cement mortar 1: 4, RCC cover slab in M-25/ RR masonry filling with brick bats, complete of size 1.20m dia 1.50m deep as shown in drg complete all as specified and directed. Drg No CESZ/TD-01/2015 Sheet 3/3. |
| 94 | Construction of soakage well, excavation in any type of soil, foundation PCC 1:3:6 wells of honey combed and solid in M-25 concrete, including intercepting chamber chamber screen chamber, brick work in cement mortar 1: 4, RCC cover slab in M-25/ RR masonry filling with brick bats, complete of size 1.20m dia 4.50m deep as shown in drg complete all as specified and directed. Drg No CESZ/TD-01/2015 Sheet 3/3. |
| 95 | Applying 3mm thick wall care putty on walls, complete all as specified and directed. |
| 96 | Preparation of new plastered or unplastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and directed. |
| 97 | Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed. |
| 98 | Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 99 | Preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 100 | Preparation of new or previously untreated steel surface any description n. exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 101 | Preparation of surfaces of any description wood/steel,iron etc.n. exc 10cm in width or girth and applying one coat of black bituminiuous paint on embedded steel post portion, complete all as specified and directed. |
| 102 | 200mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed. |
| 103 | Concrete bed to drain pipes 200mm bore including packing under,and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate, complete all as specified and directed. |
| 104 | Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVCinsulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit mediumgrade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch, complete all as specifiedand directed. |
| 105 | All as per srl item No-104 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed. |
| 106 | All as per srl item No-104 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed. |
| 107 | All as per serial item No-104 here-in-before but for 3 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed. |
| 108 | All as per serial item No-104 here-in-before but for 3 pin 15 Amps socket outlet independent board with 4.0 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 4.0 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed. |
| 109 | Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp, flush type universal, complete all as specified and directed. |
| 110 | Modular one way switch 6 Amp, 1 module, complete all as specified and directed. |
| 111 | Modular one way switch 16A, 1 module, complete all as specified & directed. |
| 112 | Modular socket outlet, 6A-2/3 pin combined 2 module, 230 volts complete all as specified and directed. |
| 113 | Modular socket outlet, 6A/16A-2/3 pin combined 2 module, 230 volts complete all as specified & directed. |
| 114 | Modular white cover plate with frame, 3 module, complete all as specified and directed. |
| 115 | Modular white cover plate with frame, 6 module, complete all as specified and directed. |
| 116 | Modular white cover plate with frame, 8 module, complete all as specified and directed. |
| 117 | Lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular suitable for batten fittings, complete all as specified and directed. |
| 118 | Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 119 | LED lamp 9 W, complete all as specified and directed. |
| 120 | Decorative ultra slim linear LED in replacement of20 Watt ,4" long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use packincludingLED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube, complete all as specified and directed. |
| 121 | LED street light fitting 35 watt 230 V AC outdoor type with high pressure die-cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, complete all as specified and directed. |
| 122 | MCB Distribution board , 240 volts single pole andneutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 8 ways, IP-43 protection and making good disturbed surfaces of walls etc, including two coats of white/colour washing/distempering etc to match the existing surface, complete all as specified and directed. |
| 123 | MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections, complete all as specified & directed. |
| 124 | MCB, SPN, AC, 240 volts "C" series capacity of 32 Amps, 10kA and making connections, complete all as specified & directed. |
| 125 | 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 10 sqmm nominal cross section 2.0 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed. Note- Earth work and protection work shall be measured and paid for separately under respective items of BOQ. |
| 126 | Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying, complete all as specified and directed. |
| 127 | Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class "B" laid across the cable complete all ad specified. |
| 128 | Supply and laying 40mm dia GI tubing light grade with all fitting laid in trenches or fixed on wall or along pole complete for protection of electric cable/strip, complete all as specified and directed. |
| 129 | Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC), complete all as specified and directed. |
| 130 | Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material, complete all as specified and directed. |
| 131 | Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., complete all as specified and directed. |
| 132 | Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball, complete all asspecified and directed. |
| 133 | Lagging to15mm dia GI pipes used in external water supply of plumbing all around with 25mm thick bonded mineral wool pre-formed. SNAPON pipe section of density 144 Kg/Cum conforming to IS-9842 or equivalent and provided chicken wire mesh netting 25gauge 20mm meshing and plaster of Peris 3 to 5 mm thick all around the mesh after breaking old unsv/ broken lagging, complete all as specified and directed. |
| 134 | Sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia, complete all as specified and directed.Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run. |
| 135 | Supply, Installation and testing of 100 Ltr per hours RO water plant H2O Sterilizer (Based on Ozonation Technology) out put capcity of 100 Ltr per hours complete with input (Raw water Qwality) to RO plant total dissolved solid : <2000 PPM out put (treated water quality) from RO plant total dissolved solid : <50PPM, including water feed pump cap not less than 0.5 HP for raw water, high pressure pump cap not less than 1 HP for treated water make of pump :Crompton Greaves/ Kirloskar, including following items of suitable cap sediment filter, Carbon filter, RO Membranes, RO pressure tube, Automatic Control panel (with complete starters, Overload relys, and single-phase preventor for pump and push buttons), H2O Sterilizer,with SS tank capacity 500 ltr with standby insulated tank inner SS:316, Outer SS: 304 all as specified and directed. |
| 136 | Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt fillingwith fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-) 8.0%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
