|
| 1 | Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out avg soil. |
| 3 | M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation. |
| 4 | M&L for Hardcore of stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 5 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 6 | M&L old size brick fly ash bricks straight or curbed on exc 6M mean radius built in CM 1:6 |
| 7 | Material and labour PCC (1:3:6) type C2 (using 40 mm graded broken stone aggregate ) as in sub base complete all as specified and as directed. |
| 8 | M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm size stone agreegate in sub-base of floor. |
| 9 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils. |
| 10 | Removing excavated material not exc. 250mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point. |
| 11 | M&L mild steel TMTbars to 8 mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) notless than 0.9mm dia. or securing with clips equality conforming to Gd.I,IS-432 (Part -I).as in stirrups, spacers and binders. |
| 12 | M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior acrylic emulsion paint over a coat of primer incuding preparation of new surface all as specified. |
| 13 | M/L for 15mm thick plaster in CM 1:6 on fair faces of concrete surfaces finished even and smooth w/o using extra cement on internal surfaces of walls preparation of new surfaces of walls and apply two coat of OBD over a coat of primer complete. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 15 | S&F rolled mild steelsections Fe-410-W(Gde-E-250)quality-B, as in main and cross beams, hip and jack rafters; purlins where connected to common raftersfixed with angle cleats or other connecting plates complete all as specified and directed |
| 16 | S&F mild steel platesFe-410 W(Gde E-250) Quality B(plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmentwith riveted, bolted or welded attachment all as specified and directed |
| 17 | M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 18 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall and two corrugated side overlap fixed with self taping screws as specified . |
| 19 | M&L position suspended false ceiling system using T- grid suspended ceiling grid system. The size of grid shall be 600x 600mm with GI frame work main runner 38x24mmx3600mm, cross tee 25x24x600mm / 25x24x1200mm and wall angle 24x24x2540mm (thickness of the material of 0.30 mm) , using 9mm thick ceiling panel laminated with PVC film on front face and foil back avilable in due drop texture aas per IS -2095, part-I-1996, fixed in the grid of T- grid suspended ceiling grid system duly suspended by4mm dia GI bar hanger from the purlins of the roof with butter fly clips all as specified and directed by Engr - in- charge ..Make:- Geproc / armstrong. |
| 20 | Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 21 | Factory made 100 % solid wood plastic composite(WPC) door frame, double rivet125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum,all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 22 | Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board taking down with existing onecomplete all as specified.Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fix for 35mm thick flush shutterssolid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete all as specified and as directedall as specified,includingtwo coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed. |
| 24 | M&L for 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated andprepared to receive glass, plain, chamfered or rounded, fitted with cut and initred beads for securing glass with stiles and rails for window and ventilators as specified in SSR Part-I section-8 clause 8.24(b). |
| 25 | S&F Aluminium powder coated louvered ventilator using rectangular tube of size 63.5X52X1.5mm thick, blades set, with provision of exhaust fan using aluminium section heavy duty including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc. |
| 26 | S&F in repair stainless steel tower bolt of 200mm long (selected quality as approved) fixed with self tapping screws complete all as specified and directed. |
| 27 | S&F in repair stainless steel handle of 150mm long (selected quality as approved) fixed with self tapping screws complete all as specified and directed. |
| 28 | S/F in repair stainless steel butt hinges 100mm complete all as specifiedand directed. NOTE:- all screws shall be self tapping chrome plated and length of screws not less 38mm coplete all as directed and specified. |
| 29 | S&F in repairs stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long (selected quality as approved) complete all as directed and specified. |
| 30 | M&L Cutting chases, pinning in, making good to facings where requiredin stone walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelve, lintels etc and cutting chases for concealed water tubing or concealed conduct wiring etc and making good cuttingn exc 10 cm girth complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L GI tubing 15mm diawith all fittings and fixed complete to walls ceilings or laid in floors of medium grade. |
| 32 | M&L GI tubing 20mm diawith all fittings and fixed complete to walls ceilings or laid in floors of medium grade. |
| 33 | S&F PVC (SWR) floor Trap, plain with grading of dia outlet 100mm dia incl fixing . |
| 34 | S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. |
| 35 | S&F in repairs 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls. |
| 36 | S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. |
| 37 | S&F in repairs 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls. |
| 38 | S/F PVC (SWR)vent cowl of size 110mm bore |
| 39 | S/F in repair Brass chromium plated towel ring all as specified and directed. Make Johnson Delta series Cat part No. T1351C or equivalent. |
| 40 | S/F in repairs angle cock with flange chromium plated cast copper alloy screwed down complete all as specified . Make johnson Eco Cat part No: T3910C or equivalent. |
| 41 | S/F PVC connection 15mm bore with two nuts and washers of PTMT of length 450mm all as specified. |
| 42 | M&L for coloured Non skid ceramic tiles 7 to 8 mm thick(square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm as floors, etc, colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles , overand including 15mm thick screed bed in CM (1:4) and demolition of existing tiles complete all as specified and directed. |
| 43 | M&L for coloured glazed ceramic tiles of size 300 x 450x 7 mm thick in vertical surfaces set and jointed in neat cement slurryand pointed in white or coloured cement to match over & including 10mm thickrendering in CM1:3 and demolition of existing tiles , complete all as specified & directed. |
| 44 | S & F in repair vitreous china washhand basin whiteflat back size195x590x420 excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP brass wastes coupling and other fittings all as specified.Make Cera |
| 45 | S&F in repairs 15mm dia brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified.[Make : JAGUAR or equivalent in Plumber/Ess Ess] |
| 46 | S&F Vitreous china squatting pan Orissa pattern wash down water closetwhite of size 580x440 mm, with integral foot rests complete with P or S trap, PVC flushing cistern high level10 liters capacity , valve less, symphonic action type complete with inlet ball valve, float and handleincluding brackets for flush tank, 32mm dia PVC flush pipe, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings,inlet, outlet pipe connections, including concrete bedding etc. complete all as specified and directed |
| 47 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass moulded on 6mm thick AC board or commercial plywood & fixed to wooden plugs with chromium plated brass screw. |
| 48 | S/F in repair bib tap suitable for 15mm bore pipe long body with flange fancy type brass CP with capstan head screwed down screwed for iron pipe brass ferrule quarter turn complete all as specified or equivelent make as per Appex \"A\" as apprved by GE. |
| 49 | S/F Cp fancy type 15mm dia stop valves/gate valve, cast copper alloy,screwed down ,high pressure, with crutch or butter fly handles screwed both ends for iron pipe or union & fixed all as specified. |
| 50 | M&L for precasted PCC Chequared tiles prepolised machine pressed chemically treated for antifurgal 300X300mm size X 25mm thick of approved coloured design complete all as specified and directed. |
| 51 | Material and labour for cutting into existing manhloes for connecting new drains,making good to pipe and rendering ,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in PCC (1:2:4) type-B-1 , Smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed. |
| 52 | M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 150mm bore including packing under the haunching against the sides of pipesafter they are laid comptete. |
| 53 | S/F for 150mm dia reinforced concrete pipes,class NP-2 laid and jointed complete |
| 54 | Material and Labour for precast RCC (1:2:4) type B-1 (using 20mm graded broken stone aggregate) as in manhole covers including formwork /moulds and set in CM (1:4) complete all as specified and as directed. |
| 55 | Dismantling 1000 litres capacity PVC water tanks all as specified and as directed. |
| 56 | S&F rotational moulded polyethylene water storage tank 3 layer white colour water tank, non-toxic effect, algea formation protection ( made from virgin grade of polyethylene material which is duly stabilized with anti -oxidant plastic) of capacity 1000 litres,(cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth ,clean and free from any hidden internal defects, hoisted and fixed in position incl S&Fnecessary GI fittings, inlet/outlet washout, overflow pieces long nipples , checknuts & washer , 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high- density plastic ball (Minimum weight 210gms) and 20mm bore brass stop cock , high pressure with crutch or butterfly handle etc all as specified and directed. |
| 57 | S/F 20 mm dia stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both endsfor iron pipe |
| 58 | Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 59 | S&F in repair cast copper alloy CP Shower arm square 230mm long with flange complete all as specified and directed by Engr-in-Charge . MakeJohnson cat part No: S0001C1 or equivalent make as per Appx \"A\" as approved by GE. |
| 60 | S&Fin repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or equivalent make as per Appex \"A\" as approved by GE. |
| 61 | Taking out old unserviceable wire net of any description from metal frame i.e. steel windows, ventilators, verandah frameby taking out old flat iron flats and removing the same from site and supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average with of aperture 1.40nn fixed with and including flat iron fillets 12mm & 3mm size, with nut & bolts as specified and as directed. |
| 62 | Material and Labour for machine pressed precast cement concrete coloured glazed interlocking tiles, paver block, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 grade in floor/pavement laid over and including 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. |
| 63 | M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squareexc 0.5 sqm in each panecomplete all as specified and directed . |
| 64 | S&F in repair 600mmx450mm beveled edge looking mirror of selected quality glass of thickness not less than 5.50mm, itched desined corners,fixed to wall with 12mm dia spacers at each corners, all as specified. |
| 65 | S&F in repairs Bib taps fancy type cast copper alloy, chromium plated for 15 mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.( Make:Jaquar or equivalent). |
| 66 | S&F in repair door stopper of stainless steel body and 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified. |
| 67 | M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 68 | S&F in repairs sheet glass 10mm thick corner shelf 250mm radius including CP railing with bracket complete all as specified and as directed. |
| 69 | S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Jaquar Cat No AEC-1111B or of equivalent make as per Appx \"A\" as approved by GE |
| 70 | S & F in repair brass Chromium plated soap dish(Polycarbide) , fixed to wall with CP brass screws, all as specified and directed. Make: Jaquar Cat No AEC-1133 or of equivalent make as per Appx \"A\" as approved by GE |
| 71 | Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame after chasing in brick / stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following |
| 72 | One light / wall / exhaust fan pointcontrolled by one, one way switch 6 Amps complete all as specified and as directed |
| 73 | One ceiling fan point controlled by one, one way switch 6 Amps and regulatorNote :PVCCasing caping /Pipe of size as required at site on surface of ceiling (only for fan point)in lieu of concealed is permitted and is deemed to be included in the unit rate quoated. |
| 74 | One3 pin socket outlet plug point, 6 Amps, controlledby one, switchon same board complete all as specified and as directed |
| 75 | One3 pin socket outlet plug point, 6 Amps, controlledby one, switchon independent board complete all as specified and as directed |
| 76 | Description all as per 1 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independentincluding necessary running of 2.5 Sqmm PVC insulatedmultistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dollyproviding Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturesall as specified and as directed |
| 77 | Supply and fixingModular Switch - 6 Amps, Single pole one way, one module complete all as specified andas directed. |
| 78 | Supply and fixingModular Switch - 16 Amps, Single pole one way, one module complete all as specified andas directed. |
| 79 | S & FModular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified andas directed. |
| 80 | S & FModular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified andas directed. |
| 81 | Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48\" & 56\" fans) supply complete all as specified and as directed. |
| 82 | S & F Ceiling rose, 3 phase / PVC / polycarbonate,complete all as specified andas directed |
| 83 | Supply and fixing20/22 WattInverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020 |
| 84 | S & FLamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified andas directed |
| 85 | Supply and fixing LED street light fitting 36 Watt or above 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make JaquarCat NoLPCRSRT 36WXC or Halonix or Bajaj. Note :- (i) GImedium grade pipe bracket of 1.5 Mtr length, size of pipe suitable to mouth of street light fitting along with nuts, botts washers and MS flat iron clamps of size as ordered shall deemed to be included in the unit rate quotated.(ii) Rate quated shall be inclusive of provision of 1.0 Sqmm 3 core copper conductor cable multistranded fromceiling rose to light fitting |
| 86 | Taking down fan, seal cable end, dismantling blades and removing fan and blades to store from siteand fixing or Hanging in existing position after proper cleaning , replacing unserviceable fan condenser 2.5 MFD and connecting up including provision of cable from ceiling rose or connector to fan after room plaster, colour complete all as specified and as directed. |
| 87 | Supply and fixing ceiling fans(5 Star rated) High speed working on single phaseinput voltage 140-285 , Sweep- 1200 mm,350 RPM (±10%) ,complete with compact BLDC Motor,blades, down rods, without remote canopy and all accessoriesincluding making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan complete all asspecified & as directed. Make-Havells (Enticer), Orient(Aeroquiet) , Bajaj (Energos), |
| 88 | Supply and fix exhaust fan,AC single Phase, working on input voltage 140-230 , of size 200 mm sweep, 1100 RPM, Power 37 Wwith Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all asspecified & as directed . Make- Atomberg (EFFICIO), Usha Crisp Air VX, Bajaj, Havells, Indo Asian |
| 89 | Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed. |
| 90 | S & F sheet metal enclosure MCB DB SPN 8 waywith 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed |
| 91 | S & F Vertical TPNDistribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz,suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C( Frame1) and SP/TP MCB\"s as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed. |
| 92 | Supplied and fixed Four pole MCCB,Thermal Release Range 63-80 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA)complete all as specified and as directed |
| 93 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB)SP 5 To 32 AMPand current carrying capacity in the MCB DB complete with connection testing and commissioning |
| 94 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB)SPN32 AMPand current carrying capacity in the MCB DB complete with connection testing and commissioning |
| 95 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 96 | Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed. |
| 97 | S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked,providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturesall as specified and as directedall as specified and as directedcomplete all as specified andas directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length). |
| 98 | S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked,providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixturesall as specified and as directedall as specified and as directedcomplete all as specified andas directed.Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length). |
| 99 | Supply and fix electric water heater, storage type shock proofwith Glass line inner tank (rust proof) and heating element upto 2 KW capacity 25 litre,temperature display, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV,16 Amps shock safe safety plug connected with 3 core cable of suitable size / length, including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed.Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department.Make- BajajModel Calenta, Havells Model- Monza Digi (GHWAMJSWH025) or equivalent make. |
| 100 | Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in soft loose soil, complete all as specified and as directed. |
| 101 | Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed. |
| 102 | Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 103 | Taking down/out unserviceable UG Cables of any Cross Sectional Area and connections and joints including pipes, bricks, etc of any description laying in trenches or fixing with walls / poles, segreating serviceable Bricks/Precast covers, pipes, cables etc, and keep in safe custody for reuse, complete all as specified and as directed.NOTE : Earthwork will be measured and paid under appropriate Items. |
| 104 | Supply and layingCable fit ( Double wall corrugated) as per IS16205 PART 24 Pipes Size 50 mm laid in trenches along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed. |
| 105 | Supply & laying LT Power Cables, Aluminum stranded Conductor, XLPE Insulated, Cores Laid Up, PVC Innersheathed, Armoured,galvanised steel strip, Extruded PVC Type ST2 Outer Sheathed, 1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments,cross-sectional area 10 Sqmm 4 core,laid in trenches / on surface of wall / along with Pole in and passing throughcable protection corrugatedpipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed |
| 106 | M&L Cement Concrete 1:3:6 (40mm graded aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and as directed. |
| 107 | 9. Supply and fix steel tubular swaged poles type 410 SP-31 (9 meter long) complete with CI base plate and finial including foundation and coping |
| 108 | S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating)with high power LEDs as light source and electronic driver of capacity 60 watts, pre wired, necessary mounting arrangements including provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required complete all as specified and as directedfitting Make Orient Cat No- LSFS-060-C, Philips, Syska |
| 109 | S & FRectangular pole mountedcable junction box suitablefor 3 Phase 440 Volt , 20 Amps of size 200 x140x 95 mm ( IP 55 Protection)made out of SMC sheet 5 mm thickness, cable entry at botton, left hinged door, with & includingPVC Bus bar Terminal connection plate for cable connection, SP MCB 6 Amps, andMS clamps to secure box with pole , complete all as specified and as directed.Make Sintex of Equivalent |
| 110 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. |
