|
| 1 | Taking down cement or cement lime plasteron brick/ stone or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc upto 4th storey building including removing the debris from site to outside MoD land. |
| 2 | Demolition of brick work/ stone masonry built in cement or cement lime mortar including all quoins, arches, pillars etc of any description including removing the debris from site to outside MoD land. |
| 3 | M&L for brick work with sub class `B\" bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified. |
| 4 | M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 including finishing surfaceeven and fair without usingextra cement. |
| 5 | M&L for 15 mm thick cementplaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 including finishing surfaceeven and smooth without usingextra cement . |
| 6 | M&Lfor 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings including finishing surfaceeven and smooth without usingextra cement . |
| 7 | M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately). |
| 8 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 9 | M&L for 18 to 20mm thick granite (of any type) work (table rubbed and polished)for wall lining (veneering towall) 12mm thickin cementmortar (1:3) and pointing with white cement (1:2)using marble dust with admixture of pigment to match with shade of granite. |
| 10 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection including finished even and smooth without using extra cement including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen mastic 85/25and sand inthe proportion of (1:3 ) by weight complete. |
| 11 | Taking down chowkats or frames with shutters(without taking off shutters from the frames) area not exceeding 1.5 Sqm each. |
| 12 | Taking down chowkats or frames with shutters(without taking off shutters from the frames) area exceeding 1.5 Sqmbut not exceeding 4 Sqm each. |
| 13 | Taking down shutter of any discription of area not exc 1 Sqm each. |
| 14 | Taking down shutter of any discription of area exc 1 Sqm but notexc 2 Sqm each. |
| 15 | M&L for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 16 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Pa+nelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing. |
| 17 | M&Lforpressedsteelframe fordoorwithonerebatedofsize 105x 60 mmincludingnecessaryfixing lugs, hinges , lockstrikeplateetccomplete all as specified anddirected. |
| 18 | M&L forfactory made pressed steel frames for doors with one or more rebates ofsize 125mmx 60 mm including necessary fixing lugs, hinges, lock strike plate, etc. all asspecified. |
| 19 | M&L for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in back filing to pressed steel framescomplete all specified. |
| 20 | S&F for 35mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete. |
| 21 | S&F for 35 mm thick factory made second class hard wood glazed andskeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats. |
| 22 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mmfixed with stainless steel wire staples. |
| 23 | S&F for butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of 100mm size. |
| 24 | S&F for aluminium anodised, barrel tower bolts of extruded section and fixed 150mm size. |
| 25 | S & F for cast type anodised aluminium handles of size 150 mm. |
| 26 | S&F for 300mm long aluminium alloy, anodized, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed withscrews complete all as specified. |
| 27 | S&F for anodised aluminium power coated(minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc all as specified. |
| 28 | S&F for anodised aluminium power coated(minimum thickness of powder coating 50 micron) window and ventilator sliding shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings including 5mm thick sheet glass and making good of the opening such as jambs, levelling and finishing with cement plaster completeallasspecified. |
| 29 | S&F for anodised aluminium power coated(minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including hydraulic door closer and mortice lock to each door including fixing 5.00 mm thick sheet glass, ordinary quality etc completeall as specified. |
| 30 | S&F for anodised aluminium power coated(minimum thickness of powder coating 50 micron)three track sliding window with mosquito net two track for glass leaf sliding and one track for mesh leaf sliding outer frame weighing 0.699 Kg/m,75mmx26 mm size of make Jindal model 20671 or its equivalent, shutter plain of size 37.5mmx15mm weighing 0.366 Kg/m, Section No 20690 Jindal with powder coating of min thickness 50 micron with one or more rebates, sliding type without sash bars including 5mm thickness double tampered clear glass , rubber packing, snap beading screws,with horizontal sliding type with stainless steelmesh,frame and powder coated aluminium grill type AL 925 or its equivalent grill, cutting in suitable size and fitting with screws and suitable beedings to aluminum window frame complete all as specified. |
| 31 | M&L for preparation of newly plastered surfaces of wall and applyingtwocoatsofexterior emulsion paintover one coat of primer over 2mm thick (avg thickness) wall care puttyall as specified and directedbyEngineer - in- charge. |
| 32 | M&Lfor complete removalofexisting treatmentof old decorated external surface of walls by electrically operated grinder including necessary scaffolding and applyingtwocoatsofexterior emulsion paintover one coat of primer over 2mm thick (avg thickness) wall care puttyall as specified and directedbyEngineer - in- charge. |
| 33 | M&L forpreparation of newly plastered surfaces of ceiling and applyingtwocoats of oil bounddistemper over a coat of wall primer all as specified and directedby Engr-in - Charge . |
| 34 | M&L forpreparation of newly plastered surfaces of walls and applyingtwocoats of oil bounddistemper over a coat of wall primer all as specified and directedby Engr-in - Charge . |
| 35 | M&Lfor complete removalofexisting treatmentof old decorated surface of walls by electrically operated grinder including necessary scaffolding and applyingtwocoatsofoil bound distemperover a coat of primer over 2mm thick (avg thickness) wall care puttyall as specified and directedbyEngineer - in- charge |
| 36 | M&Lfor complete removalofexisting treatmentof old decorated surface of ceiling by electrically operated grinder including necessary scaffolding and applyingtwocoatsofoil bound distemperover a coat of primer over 2mm thick (avg thickness) wall care puttyall as specified and directedbyEngineer - in- charge |
| 37 | M&L for preparation of newly wooden or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete. |
| 38 | Demolitionand breaking up drain pipe/RWP of 75/100mm dia ( Salt glazed ware, AC or PVC of any type). |
| 39 | S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete. |
| 40 | S&F in repair 100mm bore PVC(SWR) bends any radius complete |
| 41 | Dismantalling water tank of capacity exc 250 ltr and not exc 500 ltr complete. |
| 42 | M &L for 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top), white, three layers, hoisted and fixed in position all as specified. |
| 43 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. |
| 44 | S&F in repair20 mm diastopvalve, cast copperalloy screweddownhigh pressurewithcrutch orbutterfly handle screwedbothsidefor ironpipeorfor unionandfixed . |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified |
| 46 | M&L for mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembedinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165. |
| 47 | S&F for mild steel work framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165. |
| 48 | S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade St.-240 including necessary T&P for placing upto 10m height structure complete. |
| 49 | Dismantling of fencing wire, barbed wire any type and description complete. |
| 50 | S&F for concertina coil with punched tape of 600 mm dia (when stretched), centre core wire ofminimum 2.5 mm dia of mild steel wire conforming toIS 280-2006 with galvanised coating of steel concertina coil as per requirements laid down for medium coated wire in IS : 4826 \"Hot dipped galvainsed coating of round steel wires\".Conretina coil shall be fixed in diamond shape with the help of dovetail two handle and spikes shall be fixed at both end of coil,minimum straight length of the wire 150 RM for 10 RM of work ,minimum weight 13.5 Kg for 10 RM of workincluding dismantling of existing concertina coil complete all as specifed and directed by Engr-in-Charge.(Note : The actual weight of concertina coil brought by the contractor at site shall be ascertained by BOO as ordered by GE). |
| 51 | S&F for galvanised 2 strand, steel barbedwire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured). |
| 52 | Dismantling of plain or corrugated AC/ steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings complete all as specified and directed by Engineer-in-charge. |
| 53 | S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 54 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface of any description over 10cm width or girth including preparation all as specified and directed |
| 55 | Demolition of cement concrete of any discription and in any position not otherwise specifically provided for including removal of debris from site to outside MoD land. |
| 56 | M & L for cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in anchorage blocks for hold fast, post and struts and similar work with plain fair faces, including chamfers, weatherings, throating etc complete all as specified. |
| 57 | M & L for cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating as directed including necessary form work. |
| 58 | M&L for cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in kerbs or mud stops, rounded or chamfered edges etc |
| 59 | M & L for75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub base, floor etc. |
| 60 | M&L for factory made cement concrete digital parking tiles 300mm x 300mm x 25mm thick,set jointed andpointed in neat cement slurry as in floors with grey cement and pigmentincluding 20mm thick screed bedding layer in cement mortar 1:6. |
| 61 | S&F for factory made chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors with grey cement and pigment over 20mm scread bed in cement mortar 1:6 all as specified. |
| 62 | M&L for 60mm thick factory made machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 ofM-35 Grade with grey cement and no pigment laid over 25 mm thick sand cushion complete. |
| 63 | S&Fin repair\"E\" boardceiling 4mm thick with GIframedwork with main tee of size24mm x 28.5mm made out ofPGIsheet0.3mm thick doubledatweb andsingle atflange.Flanagecovered with powder coated sheet 0.35mm thickand wailangles 24mmx 24mm x 0.3mm powder coatedforceiling, ceilingboard60cm x 60cm x 4.00mm thick, suspended with GI wire2.24 mm diasand lengthasrequired@ 600mm C/C withadjustabledevicecompleteincluding plugging in brick/concrete work with steelrawplug @ 600 mm C/C andapplying twocoatsofoil bound distemper overceiling board. (Note : Ceilingboardshall be pressed to the ceiling tee with staple clips atallfoursides including makinggood allthe disturbedportion complete all as specifed and directed). |
| 64 | M&L for applying two coat of synthetic enamel paint on old concrete surfaces of any description over 10cm girth or width over a coat of primer including necessary preparation. |
| 65 | S&F in repair 25mm thick precast cement concrete louvres and jallies in cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate)(measured solid) including all mouldings but excluding frame complete. |
