Military Engineer Services-MES has published Tender For Comprehensive Maintenance To Certain Md Accn, Messes, Billets, Repair To Drain Path Culvert Etc B/R Works And Repair /Replacement Of Earthing Pits, Lightening Arrestors, Flame Proof Fitting And Other Item At Af Stn Naraian In Aor Of Ge (Af. Submission Date for this Tender is 24-07-2023. Building Work Tenders in New Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-07-2023 |
| Sl. No. | Item Description |
| 1 | Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc,complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for Brickwork with subclass "B" bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 3 | All as per item No 02 above here in but except bricks complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 5 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for rendering 15 mm thick cement plaster in CM 1:6 onbrick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L, Rendering 15mm thick in CM 1:4 onof brick work or concrete surfacefinish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 9 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon wall over one coat of primer incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for preparation of new plaster surface & apply twocoats of cement based paint over a coat alkali primer resistanceincl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 11 | M & L for preparation of new plastered surface and applying two coats of oil emulsion distemperon ceiling over one coat of primerincl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L fortwo coat ofAcrylic smooth exterior emulsion paint over one coat of acrlic primer incl one layer of 3mm thick wall care compound of altek/birlaputty for exterior/interior on old scraped wall/ceiling surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge. |
| 13 | M&L for preparation of old surfaces by removal of existing treatment and applying two coats of distemper oil emulsion on wall/ceiling over one coat of primerincl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for preparation of old surfaces by removal of existing treatment and applying one coats of distemper oil emulsion on wall/ceiling over one coat of primerincl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as spd and directed. |
| 15 | M & L for preparation of old wall surfaces by removal of existing treatmentand apply two coats of cement based paint over a coat alkali primer resistanceincl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 16 | M & L for preparation of old surfaces by removal of existing treatmentand apply one coats of cement based paint over a coat alkali primer resistance incl one layer of 3mm thick wall care compound of altek/birla putty on old scraped surfaces or new plasterd surfaces and obtain smooth finish using sand paper complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for non skid ceramic coloiured tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc complete all as specified and directed by Engineer-in-Charge. |
| 18 | All as per item No 17 above item but here- in area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors & dado etc complete all as specified and directed by Engineer-in-Charge. |
| 19 | M& L for Glazed ceramic jointless light/coloured group of size 300/350mmx450/600mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match,laid over and including 10mm thick plastering in cement mortar 1:4,incl dismantlingtiles etc complete all as specified and directed by Engineer-in-Charge. Note : shade & design as approved by EIC/GE |
| 20 | M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc complete all as specified and directed. |
| 21 | M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirtingetc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling tiles etc complete all as specified and directed by Engineer-in-Charge. |
| 22 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jamns, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white ciment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge. |
| 25 | M & L for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with "P" or "S" trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) incl connection to drain and flushing pipe complete all as spd and directed. |
| 27 | M&L in repair of one piece closet with bowl for coupled WC with PP soft seat cover , hinges fixing accessories and accessories set of size 360x640x680 mm, strap 220 mm withsyphonic flushing cistern with necessary fittingscomplete all as specified and directed by Engineer-in-Charge. Make Jaquar Cat Part No- SLS-WHT-6851S220PP/Kohler/Equalent |
| 28 | S&F in repair ofPVC flushing cistem low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets and taking down of old CI/PVC flushing cistern complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F in repair for 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for ironpipe or for union complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F CP jetfor EWC along with pvc connection complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F in repair for Toilet paper holder,stainless steel,fixed with and including chromium plated brass screws and and wooden/plastic cleatson walls,complete all as specified and directed by Engineer-in-Charge. Make:Jaquar Cat Part No. AKP 35753PS or equivalent. |
| 32 | S&F in repair for Health faucet brass CP with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified and directed by Engineer-in-Charge. Make:Jaquar Cat Part No. ALD CHR-573 or equivalent . |
| 33 | S&F in repair forVitreous China wash basin (Pedestal pattern), White, flat back, size550x400 mmexcluding taps, waste, chain and plug and porcelain stopperbut including brackets complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L in repair for 600x450 mmbeveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed by Engineer-in-Charge. |
| 35 | S& F in repair for swan neck pillar cock fancy typechromium plated screw with iron pipe incl all fittings in repairs complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in repair CP brass centre hole mixer without pop up waste system 15mm bore for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repair for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed by Engineer-in-Charge. |
| 39 | S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings complete all as specified and directed by Engineer-in-Charge. |
| 40 | S & F in repair Stop cock /angle CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed by Engineer-in-Charge. |
| 41 | S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm borescrewed down high pressure with crutch or butter fly handle complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F in repair for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, complete all as specified. Make: Jaquar Cat Part No. OHS 1779 for shower and SHA 49483 for arm or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F in repair for Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe orfixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms) complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F in repair for PVC connections 60cm long superior quality with PTMT nut on both side complete all as specified and directed by Engineer-in-Charge. |
| 45 | M&L for 25mm dia Decorative/ fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC/steelconduit pipes with accessories complete all as specified and directed by Engineer-in-Charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate.Nothing extra shall be paid on this account. |
| 46 | S&F in repair grating round 125mm size of CP complete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F in repair PVC waste pipe flexible type 25mm dia suitable for couplings 32mm & 40mm dia 600mm long complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position. (incl writing in white paint of 150mm size " Tank cleaning on dt _______ " complete all as specified and directed by Engineer-in-Charge. (a) Tank Capacit exc 250 Ltr but n exc 500 Ltr. |
| 49 | S&F for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position. (incl writing in white paint of 150mm size " Tank cleaning on dt _______ " complete all as specified and directed by Engineer-in-Charge. (a) Tank Capacit exc 500 Ltr but n exc 1000 Ltr. |
| 50 | S&F for Gun-metal globe or gate valves of 20mm bore , with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F for 20mm dia Nipple suitable for HDPE water tank.(Minimum weight 15mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F 20 mm dia Unions. brass to connect iron to polyethylene and fixed complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F stainless steel pegset of six suitable size of length complete all as specified and directed by Engineer-in-Charge. |
| 54 | Taking up or down 15 mm dia bore steel tubing and connection including cleaning for refixing or removed to store complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F for GI tubing 15mm boremedium grde with all fittings and fixed complete to wall and ceiling or laid in floors etc incl cutting chases in brick wall pinning in making good in CM 1:3 to facings where required all as directed and specified. |
| 56 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 58 | Taking down chowkhats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge. |
| 59 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge. |
| 60 | Taking down shutters of any description n exc 1 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 61 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar 1:6,complete all as specified and directed by Engineer-in-Charge. |
| 63 | All as per item No 62 above item but here-in size of frame 125mmx60mm for doors complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&Ffor 30mm thickflush shutters, solid core construction, with particleboard core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F for 2nd class H.W.glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.23(b) and fitted to chowkahts incl stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads etc complete all as specified and directed by Engineer-in-Charge. |
| 66 | S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F Factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C"channel having a PVCsheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl3Nos- 100mm Aluminium hinges for each shuttercomplete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F in repair for factory made Solid WPC Door frame size ( 125mm X 65mm Double Rebate ) made from 100% LEAD FREE(single extruded process) material with density780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings including all necessary assories as directed by the Engineer-In-Charge.The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity. |
| 69 | S&F in repair for factory madeSolid WPC Door frame size ( 45mm X 85mm Single Rebate ) made from 100% LEAD FREE(single extruded process) material with density780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawingsincluding all necessary assories complete all as specified and directed by Engineer-in-Charge.The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity. |
| 70 | S&F in repair for factory madeSolid WPC Door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE(single extruded process) material with density780 kg/Cbm & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawingsincluding all necessary assories complete all as specified and directed by Engineer-in-Charge.The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity. |
| 71 | S&F in repair for factory made 30 mm thick decorative surface 2mm thk moulded perlam PVC sheet on the both face an100% Solid WPC ( Wood polymer Composite ) Glazed and skeletonShutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. Fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws ncl Aluminum Jali and Stainless wiremess and other assories as per required. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repair for factory made 30mm ThickMOLDED WPC with decorative surface 2m thk Moulded wood grain printed Prelam PVC sheet on front face and 2mm thk PVC sheet on back side, 100 % Solid door ( Conforming As Per IS : 4020 ) made from 100% LEAD FREEsingle extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with Wood Grain Texture and back side palin with density not less than 600 kg/cum.Manufactured by an ISO: 9001-2015 certified company.The door should be Water Proof , Termite Proof , Fire Retardent and having screw holding capasity.Fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws ncl Aluminum Jali and Stainless wiremess and other assories as per required. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as sprceified and directed by Engr-in-Charge. |
| 73 | M&L for anodised aluminium framed workfor door, window / vent (powder coated)aluminiumwith one or more rebated incl jointed cleat for fixing etc complete all as specied and directed |
| 74 | M&L for anodised aluminium powder coated door shutter , aluminium section weighting not less than 0.55kg/RMincl necessary 4.8mm th sheet glass ordinary quality / frosted glass or ACP sheet incljoining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts,1xdoor stoper,1xHydralic door closer with each shutter any type incl taking down complete all as specified and directed by Engineer-in-Charge. |
| 75 | M&L for anodised aluminium powder coated window and ventilator shutters, aluminium section weighting not less than 0.55kg/RMincl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts complete all as specified and directed by Engineer-in-Charge. |
| 76 | M&L for aluminium Anodizedpowder coatedfixed frame of partiton or fixed window / ventilator , aluminium section weighting not less than 0.55kg/RM incl 4.8mm thick sheet glass oridinary quality " frosted glass or ACP sheet joining with rubber beading , aluminium snap beading complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples complete all as specified and directed by Engineer-in-Charge. |
| 78 | M&L for 4.8 mm thick float glass ordinary quality" frosted glass and glazing with aluminum beeding and gasket to aluminum frameworkin squareexc 0.50 sqm ineach pane in repair complete all as specified and directed by Engineer-in-Charge. |
| 79 | S & Ffor 10 -12 mm thick glass door, frosted with certain logo, fixed with floor spring, fixed on floor with two nos stainless steel handle of 300mm on each leaf and fixed partition arrangement incl necessary provision to lock the door complete all as specified and directed by Engineer-in-Charge. |
| 80 | S & F for stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed by Engineer-in-Charge. |
| 81 | S & F in repair for stainless steel wire cloth 0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed by Engineer-in-Charge. |
| 82 | S&F of door closer hydraulically regulated design No 3, universal type, suitable for door shutters of 851 to 1000m in width and weifht between 61 to 80 kg etc complete all as specified and directed by Engineer-in-Charge. |
| 83 | S&F double legged door stopper of aluminium alloy with rubber complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cmlength "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge. |
| 85 | All as peritem No 84above but laid in trench or in floor complete all as specified and directed by Engineer-in-Charge. |
| 86 | S&F for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed by Engineer-in-Charge.. |
| 87 | S&F for 110mm bore PVC bends/junctionany radius complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cmlength "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings complete all as specified and directed by Engineer-in-Charge. |
| 89 | All as peritem No 88 above but laid in trench or in floor complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&F for 75 mm bore PVC bends/junctionany radius complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed by Engineer-in-Charge. |
| 92 | Providing and laying ator near ground level factory made kerb stone of M-25 grade cement concrete inposition to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in-Charge. |
| 93 | M & L for preparation of old stone, concrete surfaces of any description over 10 CM width or girth and applying one coat of plastic emulsionpaint (Weather Coat) on old footpath/colour tiles/ kerb stone etc (colour andpattren as per approved by EIC ) complete all as specified and directed by Engineer-in-Charge. |
| 94 | Removing/cleaning of silt, mud,etc under culvert and in the drain of any width and length in soft/loose soil including depositing of removed material from site at a distance n exc 500 m and deposited where complete all as specified and directed by Engineer-in-Charge. |
| 95 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as incoping/benching and all other similar works including necessary formwork complete all as specified and directed by Engineer-in-Charge. |
| 96 | S&F in repair precast factory made polycrete (SFRC) medium duty perforated drain cover 100 mm thick rectangle in shape upto 01 sqm areaeach with hole for draincomplete all as specified and directed by Engineer-in-Charge. |
| 97 | Demolition of reinforced cement concrete of anydescrption and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 98 | Providing precast cement concrete (1:2:4 type B-1 with using 20mm graded stone agg) as in landings, cover slabs (for manholes etc). Chulah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 99 | M & L mild steel TMT bars 8 mm to 10 mm dia cut to length bent to shape required incl cracking bending spirally, hooking and binding with & incl MS wire 0.9 mm dia etc complete all as specified and directed by Engineer-in-Charge. |
| 100 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris complete all as specified and directed by Engineer-in-Charge. |
| 101 | M & L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm agg. ) as in plinth protection / path/ any paved area complete all as specified and directed by Engineer-in-Charge. |
| 102 | M&L 75mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge. |
| 103 | M&L for 60 mm thick machine cut precast concrete inter locking paver block with grey cement and pigment,(M-35) grade any clours complete all as specified and directed by Engineer-in-Charge. |
| 104 | M&L for 60 mm thick machine cut precast concrete inter locking paver block except tile ,(M-35) grade any clours complete all as specified and directed by Engineer-in-Charge. |
| 105 | M&L for 80 mm thick machine cut precast concrete inter locking paver block with grey cement and pigment ,(M-40) grade any clours as approved by EIC /GE complete all as specified and directed |
| 106 | M&L for 80 mm thick machine cut precast concrete inter locking paver block except tile ,(M-40) grade any clours complete all as specified and directed by Engineer-in-Charge. |
| 107 | M & L for sand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 108 | M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed by Engineer-in-Charge. |
| 109 | M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying offloor/sub base finishes complete all as specified and directed by Engineer-in-Charge. |
| 110 | M & L forPCC 1:2:4 Type B-2 (using 40mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises and incl demolition complete all as specified and directed by Engineer-in-Charge. |
| 111 | Dismantling of fencing post or strut (wood, steel or RCC) any section, posts embeded in concrete, brick work, masonery etc, includingtaking out embeded portionin concrete, and making good disturbed ground complete all as specified and directed by Engineer-in-Charge. |
| 112 | Demolition of cement concrete of any description and in any position not otherwise specificially provided for complete all as specified and directed by Engineer-in-Charge. |
| 113 | Dismantling of barbed wireany typecomplete all as specified and directed by Engineer-in-Charge. |
| 114 | Dismantling of concertina coil of any size any description fixed on posts or angle of any kind all as in fencing complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F MS work as in post and strutt and fencing, drilled and countersunk for balusters running bars for doors balusters,noising to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts,posts and struts in fencing including cutting tops to shape as directed drilling hoes nothcing for wire etc flat iron fillets ( for securing wire mesh ) including all necessary drilling bolting or riveting etc. and similar work conformingto Fe - 290 Gde E - 165 complete all as specified and directed by Engineer-in-Charge. |
| 116 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as incoping/benching, fixing angle iron and all other similar works including necessary formwork complete all as directed. |
| 117 | S&F in repair two strand galvanised steel barbed wire 2.24mm dia barbed with 2mm dia bars @ 75mm spaciang and fixed to any type started rails strained bolts incl securing or tying at closing with and provn of galvanised mild steel wire staples or steel pins complete all as specified and directed by Engineer-in-Charge. |
| 118 | S&F for 900/600 mm dia concentrina spiral coil fencing with punched tapeand 6 m max openable length, on wall with angle iron Y shaped with 9 horizontal RBT reinforced barbed wire studied with GI staples and GI clips to retain horizontal incl necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of EIC, with reinforced barbed wire tape (RBT)/spring core (2.5 mm thick) wire of tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.47 gm/m complete all as specified and directed by Engineer-in-Charge. |
| 119 | M&L in applying two coats of synthetic enamel paint over a coat of red oxide primer to new steel and iron surfaces over 10cm in width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 120 | M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed by Engineer-in-Charge. |
| 121 | S&F Acrylic letters (English/Hindi) 300 mm high, 50 mm width and 3 mm depth hollow wall fixed on walls fixed on wall surface or or 3mm ACP sheets board of any description using stainless steel screws of suitable size or best quality adhesive including LED module rain proof lights fittings in each letters complete all as specified and as directed by Engr-in-charge. |
| 122 | Removing daberies/excavated material to a distance exceeding 1.5KM butnot exceeding 5 KM and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 123 | M&L for broken glass in CM 1:3 coping on top of walls complete all as specified and directed by Engineer-in-Charge. |
| 124 | S&F in replacement MCB SP 5 to 32 Amps,240 volts curve "C",breaking capacity 10KA, complete all as specified and directed by Engineer-in-Charge. |
| 125 | S&F in replacement MCB SPN32 to 63 Amps,240 volts,curve "C", breaking capacity 10 KA, complete all as specified and directed by Engineer-in-Charge. |
| 126 | S&F in replacement MCCB,Four pole,415 volts, 125 Amps , curve "C",breaking capacity 10 KA,all as specified and directed by Engineer-in-Charge |
| 127 | S&F in replacement MCB TP 40 to 63 Amps,415 volts curve "C",breaking capacity 10KA, all as specified and directed by Engineer-in-Charge |
| 128 | S&F in replacement MCB TPN 40 Amps,415 volts curve "C",breaking capacity 10KA,all as specified and directed by Engineer-in-Charge |
| 129 | S&F in replacement MCB TPN 63 Amps,415 volts curve "C",breaking capacity 10KA,all as specified and directed by Engineer-in-Charge |
| 130 | S&F in replacement MCB 4 Pole 100 Amps,415 volts curve "C",breaking capacity 10KA, all as specified and directed by Engineer-in-Charge |
| 131 | S&F sheet metal enclosuresDBDouble door Verticle distribution type,04 way,TPN DB , IP43, 415V & suitable for MCCB TP as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer all as specified and directed by Engineer-in-Charge |
| 132 | S&F sheet metal enclosuresDBDouble doordistribution type,04 way,TPN DB , IP43, 415V & suitable for MCB TP as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer all as specified and directed by Engineer-in-Charge |
| 133 | S&F sheet metal enclosuresDBDouble doordistribution type,06 way,TPN DB , IP43, 415V & suitable for MCB TP as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer all as specified and directed by Engineer-in-Charge |
| 134 | S&F in replacement sheet metal enclosuresDBDouble door type 8 way SPN 240 voltincluding 200 Amps rated bus bar with neutral link complete,all as specified and directed by Engineer-in-Charge |
| 135 | S&F in replacement sheet metal enclosuresDBDouble door type 4 way SPN 240 voltincluding 200 Amps rated bus bar with neutral link complete, all as specified and directed by Engineer-in-Charge |
| 136 | M& L for precast earthing RCC pit with cover of standard size duly painted in Red or Green all as specified and directed by Engineer-in-Charge |
| 137 | M&L for earth pit cover bucket type Red or Green all as specified and directed by Engineer-in-Charge |
| 138 | M&L for CI plate triangular with 500 mm long spike for writing earthing name and value all as specified and directed by Engineer-in-Charge |
| 139 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½XLPE, armoured, Al conductor cable of size 120 to 240 sqmm,Outdoor type all as specified and as directed by Engineer-in-charge. |
| 140 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½XLPE, armoured, Al conductor cable of size 95 to 120 sqmm,Outdoor type all as specified and as directed by Engineer-in-charge. |
| 141 | Supply and fix cable duct cover made of iron of size 320mm x 800 mm of thickness 3.0 mm all as specified and as directed by Engineer-in-Charge |
| 142 | M&Lfor Providing,PCC 1:3:6 type C-1 using 20 mm graded stone aggreat,for damaged earth pit chamber with fair finish internal surface of concrete chamber of earthcomplete all as specified and directed by Engineer-in-charge. |
| 143 | S & F rubber insulation mat of size 1.8 mtr x0.9mtr wide 2 mm thick red/blue colour ISI marked embozzed for up to 33 KV as per latest IS complete all asspecifiedand as directed by Engineer-in-Charge. |
| 144 | M&Lfor providingDisplay board of size 1m x 1m x1 cm madeup with acrylic sheetmaterial consisting of"First Aid discription with pictures " in Capital Letterat the Top complete with fixing arrangements to the wall complete all asspecifiedand as directed by Engineer-in-Charge. |
| 145 | M&Lfor providingDisplay board of size 1m x 1m x1 cm madeup with acrylic sheetmaterial consisting of"First safety instruction with fire extenguishing methods with pictures " in Capital Letterat the Top complete with fixing arrangements to the wall complete all asspecifiedand as directed by Engineer-in-Charge. |
| 146 | Supply and fixing LED light fitting 1x16 Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all asspecifiedand as directed by Engineer-in-Charge. |
| 147 | Supply and fix in replacement Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all asspecifiedand as directed by Engineer-in-Charge. |
| 148 | M&L in replacementAir termination franklin typr ,copper rod 12mm dia and 300mm long complete all asspecifiedand as directed by Engineer-in-Charge. |
| 149 | M&L in replacement Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors including saddles,insulator, nut & bolts brazing etcabove ground complete all asspecifiedand as directed by Engineer-in-Charge. |
| 150 | M&L in replacement GI32 x 6mm with saddles and fixing screws etc. for roof conductors and down conductors including saddles,insulator, nut & bolts brazing etcabove ground complete all asspecifiedand as directed by Engineer-in-Charge. |
| 151 | M&L in replacement Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all asspecifiedand as directed by Engineer-in-Charge. |
| 152 | M & L in replacement earthing with steel earth plate electrode of size 60 x 60 cm x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less tha 1.5 mtr deep below normal grund level connected to galvanized iron strip size 32 x 6 mm as earthing lead by means of nuts, bolts and washers of steel after wlding of GIstrip to earth electrode to the full length of earht plate, 40mm dia GI tubing lightgrade protection pipe upto test point, 20mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover ofsize 30x30 cm made of RCC 1:3: with suitable handle, angle iron frame made of angle iron of size 40x40x4m, adequate qty of charcoal dust and salt layers all around the earth plate and filling of vegetables soil to the remaining 10% removal of surplus soil and retruning filling in all as required at site including test point made outof steel plate of size 75x75x6mm fixed to wall all as specified in plate No 3 of SSR Part-I complete all asspecifiedand as directed by Engineer-in-Charge. |
| 153 | M&L in repair Pre-cast cement concrete block masonry with solid blocks PCC Type B1 1:2:4 ( 20 mm graded aggregate ) , exc. 10 cm in width and setting in mortar, complete all asspecifiedand as directed by Engineer-in-Charge. |
| 154 | M&l in replacement tubing light grade galvanized iron to be embeded in PCC block fitting complete with 40 mm bore all as specified and directed by Engineer-in-Charge |
| 155 | M&L for Design, development, supply commissioning and testingEHCC certified ground tubular effective chemical earthing system (CPRI tested for 15 KA current capacity for LT Iine) highly anticorrosive long life electrode with and including adequate protective coating to withstand servereweatherconditions in the earth pit of the standard size comprising of 40mm x 3m Long Copper rod as primary conductor and hollow copper tube of 80mm x 3m long as secondary conductor to install with suitable connecting terminal confirmingof IS 3043 : 1987 specification, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation with crystalline conductive mixture (CCM)20 Kg per bag (3 bag per kit) minimum or sufficientquanitities required as per site complete including RCC earthing pitcover , material and labour complete all asspecifiedand as directed by Engineer-in-Charge. |
| 156 | M&L earthing complete with galvanized steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand includinggalvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means ofnuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dollyall as shown in electrical plate No 3 of MES SSR part I and testing on completion includingnecessary excavation and earth work in any type of soil,PCC(1:3:6)type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed. |
| 157 | M&L submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 4 sqmm drawn through PVC conduit medium grade ISI marked25mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2.5 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper all as directed at site Note : Two runs of 4 sqmm cable alongwith one run of 2.5 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length). |
| 158 | M&L submain wiring with 2 runs of copper conductor FRLS PVC insulated unsheathed cable 1100 volt grade 6 sqmm drawn through PVC conduit medium grade ISI marked25mm dia as per IS specification fixed concealedin wall/ceiling including conduit and conduit accessories and incl provn of PVC insulated 2 Sqmm multistranded copper conductor as earth continuity conductor connected to earth dolly all as specified including dismantling old and making good to the disturbed surface by plastering and two coat of distamper complete all asspecifiedand as directed by Engineer-in-Charge. Note : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathedcopper conductor as earth wire, conduitand conduit accessories will be measured as one length). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
