|
| 1 | Taking down wooden shutters of any descriptionexc 2 sq.meach complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters n.exc.1.5 sqm (Without taking off shutters from the frame) and removing to or from complete all as specified and directed. |
| 3 | Taking down chowkhats or frames with shutters exc.1.5 sqm but N.exc 4 Sqm(Without taking off shutters from the frame) and removing to or from complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and as directed. |
| 5 | Dismantling structural steel work including doors, gates, rolling shutters, etc. but excluding framed truss etc complete all as specified and directed. |
| 6 | Dismantling of asbestos cement (corrugated, semi-corrugated,etc.) sheets in roof coverings complete all as specified & as directed. |
| 7 | Demolition of brick work / pre cast concrete article / stone masonry built in cement mortar complete all as specified & as directed. |
| 8 | S & F 35mm thick Plain framed, panelled door shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 9 | S&F second class hard wood plain, solid straight factory made chowkats or frames wrought framed, rebated on solid rounded or chamfered put together with glue pinned incl tarring back of chowkhat/frame complete all as specified and directed. |
| 10 | S&F to chowkats or frames 2nd class hard wood glazed and skeleton shutters 35mm thick factory made open rebated and prepare to receive glass gauges etc edges of framing plain or chamfered or rounded fitted with cut beads for securing glass or gauges etc. complete all as specified and directed. |
| 11 | S& F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 12 | S& F in repair Aluminium anodised barrel tower bolts150mm long of extruded section and fixed complete all as specified and directed. |
| 13 | S& F Aluminium anodised barrel tower bolts150mm long of extruded section and fixed complete all as specified and directed. |
| 14 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 15 | S & F in repair 150mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 16 | S&F in repair 150mm double action spring hinge, mild steel with steel wire spring, stove enamelled black complete all as specified and directed. |
| 17 | S & Faluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 18 | S & F in repairaluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 19 | M & L for preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 20 | S&F 20mm dia aluminium powder coated Drapery rod of medium weight and fixing brackets, decorative end supports etc complete all as specified and directed. |
| 21 | S&FDoor closer Alluminium(exturded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 22 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 23 | S & F sheet glass 3mm thick ordinary quality and glazing with oil putty/wooden beadsin squares n exc0.50 Sqm in each pane complete all as specified and directed. |
| 24 | S&F, solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification and drawing complete all as specified and directed. |
| 25 | S&F, factory made solid panel PVC door shutters, 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" chanel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides & as gap insert for top & bottom rails. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed stiles & rails with suitable PVC sheet beading and jointed together with solvent cement. Supply and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 26 | S&F powder coated aluminium, three track sliding window frame of section size 92.00x 31.75x1.3mm comprising ofone No of fly proof shutter and two nos of glazed shutter frames of section size 40x18x1.3mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement all as specified and directed. (Notes. (i) Glass filling in panels of windowa and aluminium wire mesh/wire cloth shall be demed to be included in the quoted rate for the itme, ii) aluminium ally wir cloth in panels ofwite gauzed shutter shall be0.45mm nominal dia of witer and avg width of aperture 1.40mm, fixed with aluminium wire staples,. iii) Glass filling in panels of glazed shutter shall be 4mm thick tinet sheet glass complete all as specified and directed. |
| 27 | S&F anodised aluminium grill made out of 7mm x 4.5mm w\"ide flat, square ractangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (section 8778 complete all as specified and directed. |
| 28 | S&F powder coated aluminium doors of section and partition with frame shutters.incl necessary joining cleats, glazing cleats, rubber paking gasket and lining, anodised aluminium snap beading, screws, handles and locking arrangement complete all as specified and directed. |
| 29 | S&F 12 mm thick Prelaminated particle board, interior grade,prelaminated one side withdecorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed. |
| 30 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 31 | M&L Sheet glass, 5.0 mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 sq.m in each pane complete all as specified and as directed complete all as specified and directed. |
| 32 | Welding in repairs n. exc 2.5cm in length for exc 09 mm not exceeding 20 mm bars complete all as specified and directed. |
| 33 | M&L Precast cementconcrete solid block masonry exc.10 cm in width and setting in morttar complete type C 1 1:3:6( 20mmgraded aggregate ) in 1:6 CM |
| 34 | M&L Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces with water proofing compound @ 3 % of weight of cement and finished fair and smooth without using extra cement complete all as specified and directed.(Note:- water proofing compound will be measured and paid for seperately as supply only) |
| 35 | Supply only integral water proofing compound |
| 36 | M&L Rendering 15mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and smooth without using extra cement complete all as specified and as directed. |
| 37 | M&L Rendering 10mm thick cement plaster in CM 1:3 on ceiling surface finished fair and smooth without using extra cement complete all as specified and as directed. |
| 38 | M&L Rendering 10mm thick cement plaster (1:6) on fair faces of brick or concrete surfaces complete all as specified and directed. |
| 39 | M&L for Preparing surfaces plastered or unplastered and applying three coats of white wash on ceilings complete all as specified and as directed. |
| 40 | M&L for Preparing surfaces plastered or unplastered and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 41 | M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/ old surfaces complete all as specified and as directed. |
| 42 | S&F pre-painted galvatume aluminum Zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified & as directed. |
| 43 | S&F pre-painted galvalume aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tappping screws complete all as specified & as directed. |
| 44 | M& L for asbestos cement6 mm thick corrogated or semi-corrugated sheets in roofs fixed with l-type or j-type or cranked hook bolts etc complete all as specified & as directed. |
| 45 | Supply and fixiing steel work in tubular trusses including special shaped washer etc… complete using ERW or induction butt welded tubes conformiing to I S 1161-1979 grade St-240 complete all as specified & as directed. |
| 46 | S & F roof trusses (framed), trussed , purlins, cranes grantries, rails and fastenings and heavy brackets fraiing (beam, tee , angles, channels or flat sect) including distances pieces cleats etc of Fe-410 -W (Gde -250 quality -A) complete all as specified & as directed. |
| 47 | S & F stairs (framed) including stringers, treaders, landing balusters, hand rails etc,.. Including cleats brackets etc of Fe-410 -W (Gde -250 quality -A)complete all as specified & as directed. |
| 48 | M&L for two coat of sythentic enamel painting onnew steelpainted sufaces including prearation of surfaces10 cm width or girth incl one coat of red oxide zinc primer complete all as specified & as directed. |
| 49 | S & F For Nylon net of bird proofing for shed / storage accn/ soft pen and possess following properties: a) The brust strength up to 44 poundsb) Shall meet ISO 1806 protocols.c) 3/4 \" (Three Fourth inch), Messs netting.d) Thickness 0.071\" thick(6 SDtrands each 0.012\" Thick).e) Quality control- filments: are twisted and knotted pressure stretched and tughtened.f) break strength: 52 lbs/2316 kgs per strand.g) chemical properties-polythylene, a parffin hydrocarbon, is chemically insert, flame retardant and highly resistant to most chemicals at temperatures.h) High resistant to acids and alkaloids at all concentrations.i)High temperature-210-239 Degree, F/100-115 Degree. j)Low temperature-139 to 166 degree, F/-95 to 110 DegreeC. Including all fitting such as rolling pully, Iron strips, rope for cotrolling net, nails etc. all asspecified and directed by engineer in charge. |
| 50 | S& F Steel rolling shutters of thickness 1.25 mm, with ball bearing as specified including top cover, anchoring rod, MS Spring, gear set,hasp and staple and one shop coat of primer, erected in position as indicated, complete : Push Pull or manual type including Safety lever locks mild steel with 4 levers for rolling shutter complete all as specified & as directed. |
| 51 | M & L for repairs and servicing of rolling shutters and removing of worn out components wherever required such as hood covers, laths, ball bearings, helical wire springs, lock plates, bracket plate, shaft pipe and straightening of existing guide channels, gear boxes, laths, hood cover at required places including greasing and welding and refixing in the same opening for smooth functioningand making good the disturbed surfaces of walls to match with existing complete all as directed by the Engineer-in-Charge (NOTE: (i) Quoted rate is inclusive for replacement all minor spare parts as requiredand supply of major spare part such as MS Spring, ball bearings,laths, shaft pipe, gear set required for replacement will be measured and paid separetaly under relevant items) |
| 52 | S&F 350mm MS spring for rolling shutter complete all as specified & as directed. |
| 53 | S&F 450mm MS spring for rolling shutter complete all as specified & as directed. |
| 54 | S&F ball bearing of size 50mm inner dia for rolling shutter complete all as specified & as directed. |
| 55 | S&F gear set for rolling shutter complete all as specified & as directed. |
| 56 | M&L in repair of rolling shutter shaft assembly including all necessary fittings complete all as specified & as directed. |
| 57 | S&F mortice lock steel 6 lever chromium plated with double handles for single shutter to match with existing one and fixed to true position in repairs complete all as specified & as directed. |
| 58 | Repairs to aluminium doors by cleaning, greasing and easing for smooth functioning including replacement of unserviceable fittings complete all as specified & as directed.Note:Spare parts if required shall be measured and paid separately under respective items. |
| 59 | Description all as per Srl item No 58.00 Windows of any size. |
| 60 | M&L for Obliterating old writing of any description n.exc 0.1 Sqm with paint to match with existing work complete all as specified & as directed. |
| 61 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm height complete all as specified & as directed. |
| 62 | M & L for tempered or toughened glass 12 mm thickness used for preparing balcony doorss, windows, bathroom doors, and in weapon storage area with all necessary fittings complete all as specified & as directed. |
