|
| 1 | DISTRIBUTION MAIN |
| 2 | Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of DI class K-7 pipes with Cement Mortar Lining for distribution main(Please refer to Section 5,Sl. 3.0 of SBD) |
| 3 | Providing and supplying ISI mark centrifugally cast (spun) Ductile iron pressure pipes of 100mm and above all diameter for water works with socket and Spigot ends conforming toIS 8329/2000 in standard working lengths of 4.5, 5.5 & 6.0 M for classification K-7 suitable for push-on-joint (Rubber gasket D jointing ) with cement morter lining inside the pipes with outside Zinc and bituminous coating, and one no. gasket with each pipe.The rates are F.O.R at work site in Jharkhand including Royalty, Inspection charges and other Taxed but excluding GST. |
| 4 | 100 mm dia pipe |
| 5 | 150 mm dia pipe |
| 6 | A) Earth work in excavation (As per IS. 3114/1965) for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in charge. |
| 7 | B) E/W in excavation of cut off trenches as per design section in soft rock or ordinary rock (where blasting is not needed) (vide classification of soil item-C with disposal of spoil (beyond 10M away from the toe of dam in country side) with initial lead of 10M and lift of 1.5M, including making the section in profile, dressing sides in proper slope and bed in proper grade etc. all complete as per specifictaion and direction of E/I.-30% of excavated earth. |
| 8 | Earth work in backfilling the trenches after lying of different types and sizes of pipes with earth removed during excavated within initial lead and lifts as per specification and direction of Engineer in charge. |
| 9 | Supplying labours, tools, tackles, lubricant etc. for laying and jointing D.I/C.I. S/S tyton pipes (class LA) trenches supplying without rubber gasket conforming to I.S.S - 5382-1969) and making gasket joint including providing night guard, barrier and red light to safe guard against accident, all complete ( pipe to be supplied departmentally free of cost and laying of pipe is to be done as per I.S.S 3114-1985 as per deisgn, specification and direction of E/I. |
| 10 | 100 mm dia pipe |
| 11 | 150 mm dia pipe |
| 12 | Providing and supplying ISI standard D.I specials & fitting with sealing rubber gasket of S.B.R complete with cast iron follower gland and M.S nut & bolts coated or otherwise protected from rusting and suitable for D.I pipes including ED, CST, all taxes, etc. complete as per I.S-9523. |
| 13 | Providing Double Flanged Sluice valve (Size 50mm to 1200mm) for scour, confirming to IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. all complete. Without byepass arrangementPN - 1.0 |
| 14 | 100mm |
| 15 | 150mm |
| 16 | Supplyng labour and tools for fixing C.I sluice valve in trenches with a pair of C.I Tail pieces incluidng making lead caulked joints and flenged koints as per I.S specification , including supplying all jointing materials (Pig lead confirming to ISS 782-1978, yarn confirming to IS.S 6587-1972 and nuts and volts confirming to I.S.S 1364-1983) including drillig holes in flanges if required as per specification and direction of E/I. (Sluice valve and pieces to be supplied department free of cost.) |
| 17 | 100mm |
| 18 | 150mm |
| 19 | Dismentaling plain cement or lime concrete work including stacking servicable materials in countable stacks within 15 meter lead and sisposal of unservicable materials with all leads all complete as per direction of E/I. |
| 20 | Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stones chips 20 mm - 6mm size graded and clean coarse sand FM 2.5 to 3.0 including screening shuttering mixing cmenet concrete in mixer and placing in position vibrating striking curing taxes and royalty all complete as per building specification and direction of E/I. |
| 21 | Restoratoon of PCC Road |
| 22 | Supplying all materials, labours tools for construction of brick massonary S.V. chamber of size 1.20 x 0.90 (I.D) & 1.50m deep as per standard specification. |
| 23 | Labour charges for one cutting Pipes including supplying necessary tools & plants as per specification. |
| 24 | 100 mm dia pipe |
| 25 | 150 mm dia pipe |
| 26 | Removable mechanism type Bulk water meter as per ISO 4064 |
| 27 | 100mm dia |
| 28 | 150mm dia |
| 29 | supplying tools and tackles for testing of laid D.I pressure pipe up to 60 mm meter head of water all complete as per specification and direction of engeneer- in- charge. |
| 30 | 100 mm dia pipe |
| 31 | 150 mm dia pipe |
| 32 | Office Room under existing ESR (Please refer to Section 5,Sl. 2.7 of SBD) |
| 33 | Providing designation 75A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F. M. 2 to 2.5 including providing 10 mm thick mortar joints, costs of screening, materials, scaffolding, ranking out joints to 15mm depth curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 34 | Providing R.C.C M-200 with nominal mix of (1:1.5:3 )in lintel with approved quality of stone chips 20mm to 6mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete, screening, centering, shuttering, & mixing cement concrete in mixer & placing in position vibrating, striking,(but excluding the cost of reinforcement ) taxes, & royalty all complete as per building specification of E/I. |
| 35 | Providing average 63mm thick R.C.C M-150 with nominal mix of (1:2:4 ) chajja & in shelves with approved quality of stone chips 20mm to 6mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete, screening, centering, shuttering, & mixing cement concrete in mixer & placing in position vibrating, striking, 6mm cement plaster (1 :4) in ceiling & sides of chajja with sand of F.M 1.5 , curing (but excluding the cost of reinforcement ) taxes, & royalty all complete as per building specification of E/I. |
| 36 | Providing R.C.C M-200 with nominal mix of (1 : 1.5 : 3) in roof slab withapproved quality of stone chips 20 mm to 6 mm size graded & clean coarse send of FM 2.5 to 3 including screening, shuttering , mixing cement concrete in mixer & placing in position , vibrating, striking , curing (but excluding the cost of reinforcement) , taxes & royalty all complete as per building specification & direction of E/I. |
| 37 | Supplying, fitting & fixing good quality, well dressed & well seasoned sal wood work in choukhat in doors, windows, skylights, fan lights and celestial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of the E/I. |
| 38 | Supplying fitting and fixing 250x20x6mm. L- type M.S. Clamp properly fish tailed, including making holes and setting the same in 375x125x75mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and direction of E/I. |
| 39 | Supplyingfitting & fixing 38mmthick well dressed and well seasoned Sal wood battened shutter ledged & braced in door and windows with oxidized iron fittings such as hinges, sliding door bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand block as per schedule, taxes & royalty all complete as per building specification & direction of Engineer-in-Charge. |
| 40 | Supplying, fitting & fixing M. S. Grill made of 20 x 6 mm M.S. flat as per approved design & drawing, properly fabricated with joints continuous fillet welded & finished smooth, carriage of grill to work site, hoisting as per the building specification & direction of E/I. (where materials is not supplied by the Dept.) |
| 41 | Providing 25mm thick pre cast R.C.C. M - 150 with nominal mix of (1:2:4) in jali with approved quality of stone chips of 6mm nominal size and clean coarse sand of FM2.5 to 3 with 1.6mm thick M.S. wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing, scaffolding and finishing all complete as per building specification and direction of E/I. |
| 42 | Providing and fixing fan hook of 16 mm dia M.S. bar 1meter long bent to required size and shape, placed in position and fixing in R.C.C. slab / beamat the time of castingall complete as per building specification and direction of E/I. |
| 43 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification & direction of E/I. |
| 44 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes & royalty all complete as per building specification & direction of E/I. |
| 45 | Providing 25 mm thick first class patent stone flooring (1:2:4) withstone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips, in panels including cost of curing, finishing the surface smoothby rubbing with carborandum stone, taxes & royalty with all complete as per building specification & direction ofE/I. |
| 46 | Two coats of snowcem of approved shade over a coat of cement primer overnew surface with approved quality of lime in approved shade includingthe cost of cleaning surface thoroughly and removing the scales& mosh marks with jhama rubbing, scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 47 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I |
| 48 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 49 | Providing two coats of synthetic enamel paint of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding & taxes all complete as per building specification& direction of E/I. [JH-SOR- 5.8.45] |
| 50 | Providing tor steel reinforcement of 8 mm dia as per approved design and drawing excluding carriage of bars to work site ,cutting, bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.TMT Fe 500 (Only valid for SAIL and TATA ) |
| 51 | Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete . |
| 52 | Cement 10KM lead |
| 53 | Steel10KM lead |
| 54 | Sand36KM lead |
| 55 | Bricks6KM lead |
| 56 | Stone/Stone Chips11 KM lead |
| 57 | Water Supply Sanitation Installation (Plumbing work) |
| 58 | Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I. |
| 59 | i) 25mm GI. Pipe. |
| 60 | ii) 15 mm GI. Pipe. |
| 61 | Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I. |
| 62 | i) 15 mm GI. Pipe |
| 63 | Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I. |
| 64 | Supplying and fixing GI fittings of approved make all complete as per direction of E/I. |
| 65 | (a) Elbow 15 mm dia |
| 66 | (b) Tee plane 15mm dia |
| 67 | (c) Nipple 15mm dia. |
| 68 | (d) Union Socket 25mm dia |
| 69 | (e) Union Socket 15mm dia |
| 70 | (f) Brass bib cock15mm dia |
| 71 | (g) C.I stop cock 15mm dia |
| 72 | (h) C.I. stop cock 25mm dia |
| 73 | (i) Reducing Socket 25x15mm |
| 74 | (j) Tee 25x25x15mm dia |
| 75 | Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or otherISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.(510mm.long with 12.5 Liter low level PVC System). |
| 76 | SEPTIC TANKand SOAK PIT |
| 77 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removingrootsoftrees, shrubsall complete as per approved design, building specification and direction of E/I. |
| 78 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I. |
| 79 | Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I. |
| 80 | Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mmto 6mm size well graded andclean course sand of FM-2.5to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 81 | Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per buildingspecification and directions of E/I. |
| 82 | (a) 19 mm thick |
| 83 | (b) 12 mm thick |
| 84 | Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 85 | (a) B/Win C.M (1:4) |
| 86 | (b) B/W 75-B in (1:6) for Soak pit |
| 87 | (c) Brick work in dry masonry for soak pit. |
| 88 | Providing pre cast R.C.C.M-150 with nominal mix of (1:2:4) slab of desired sizewith approved quality of stone chipsand clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I. |
| 89 | Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I. |
| 90 | 10 mm dia |
| 91 | Supplying fitting and fixing H.C.I. Pipe/ H.C.I. fitting of Approved make confirming to I.S.S 1729 including supplying nails and bobbins lead andyarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I. |
| 92 | (a) 100mm dia H.C.I. Tee. |
| 93 | (b) 100mm dia H.C.I. Band |
| 94 | (c) 50mm dia H.C.I. Cowel |
| 95 | (d) 50mm dia H.C.I. Vent pipe |
| 96 | (e) 100mm H.C.I. Pipe |
| 97 | Supplying materials and labours and fixing20mm dia M.S bar steps in wall of 0.3 m interval and staggeredin (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I. |
| 98 | Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete. |
| 99 | Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I. |
| 100 | Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475 mm G.I. Cover With frame ( Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I |
| 101 | Carriages of materials |
| 102 | (a) Brick –6 KM lead |
| 103 | (b) Sand -36 KM lead |
| 104 | (c) Stone chips -11 KM lead |
| 105 | (d) Steel 10 KM |
| 106 | (d) Cement- 10 KM lead |
| 107 | Electrical Works |
| 108 | Point wiring in PVC conduit with modular type switch wiring for light point /fan point with 1.5sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required |
| 109 | Wiring for twin control light point with 1.5 sqmmF.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with two way modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required |
| 110 | Wiring for light /power plug point with 2 x 4 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with one no 4 sqmmFR PVC insulated copper conductor single core cable for loop earthing etc as required |
| 111 | Coppersub main wiring in PVC conduit Wiring for sub main wiring withPVC insulated copper conductor single corein surface/recessed PVC conduitas required |
| 112 | 2 x 1.5 sqmm + 1 x 1.5 sqmm earth wiring |
| 113 | 2 x 2.5 sqmm + 1 x 2.5 sqmm earth wiring |
| 114 | Supplying and fixing following way three pole and neutral sheet MCB distribution board 415 volts on surface/recessed complete with tinned copper bush bars ,neutral link, earth bar, din bar, detachable gland plate inter connection phosphatised and power painted including earthing etc as required (but with out mcb / rccb / Isolator) (4 +12 ) double door horizontal type |
| 115 | Supplying and fixing 5 amp to 32 amp, rating 240 volts, B series miniature circuit breaker of single poles in existing MCB DB complete with connecting ,testing, and commissioning etc as required |
| 116 | Earthing with G.I. earth pipe 4.5 M long 40mm diaincluding accessories and providing masonry enclosure withcopperplate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule |
| 117 | Supplying ,fitting and fixing following sizes of PVC conduct along with accessories in surface / races including cutting the wall and making good the same in case of recessed conduit as required |
| 118 | PVC con 20 mm PVC pipe |
| 119 | PVC con 25 mm PVC pipe |
| 120 | Installation commissioning and testing Ceiling Fan |
| 121 | Carriage of ceiling fan and regulator |
| 122 | Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction |
| 123 | Supplying ,fitting and fixing breas batten/ angle holder including connection etc. |
| 124 | Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 3pin 5/6 amp modular type switch, connection, painting etc as required. |
| 125 | Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 6pin 5/6 amp and 15/16 amp socket outlet and 15/16 amp modulartype switch, connection, painting etc as required. |
| 126 | Supplying and drawing co-axial T.V. cable RG-06 grade 0.7 nn solid copper conductor PE insulated seilded with fine tinned cover braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required. |
| 127 | Supplying and fixing modular switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc,as required. TV antenna socket out put |
| 128 | Supplying ,fitting and fixingmodular base andcover plate on existing modular metal boxes etcas required. |
| 129 | Cost ofEarthing with G.I. earth pipe 4.5 M long 40mm diaG.I.Pipe 600mm x 600mm x 6mm thick copper earth plate, and 8 SWG copper wire including cost of making 1.2x1.2x3m deep pit and filling with charcoal ,salt all complete as per electrical rule |
| 130 | Compound Wall/ Boundry Wall for WTP. (116.40 M Long) |
| 131 | Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job.(Please refer to Section 5,Sl. 2.9 of SBD) |
| 132 | Earth work in excavation in foundation trenches in hard soil (Vide classification soil item A) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I |
| 133 | Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I. |
| 134 | Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I. |
| 135 | Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 136 | Centering and Shuttering |
| 137 | Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 138 | Centering and Shuttering |
| 139 | Providing RCC M-200 with nominal mix of (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. |
| 140 | Centering and Shuttering |
| 141 | Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.Top of Wall |
| 142 | Centering and Shuttering |
| 143 | Providing RCC M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.Top of Wall |
| 144 | Centering and Shuttering |
| 145 | Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 146 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I. |
| 147 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per buildingspecification & direction of E/I. Qnty. Same as Item no.13 |
| 148 | Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I |
| 149 | Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I |
| 150 | Carriage of materials from divisional store or kiln site or quarry site to work site including contractor\"s profit, loading, unloading, transportation etc. all complete . |
| 151 | Cement10KM lead |
| 152 | Steel 10KM lead |
| 153 | Sand36KM lead |
| 154 | Stone/Stone Chips11KM lead |
| 155 | Bricks6KM lead |
| 156 | Gate - 1 no. |
| 157 | Earth work in excavation in foundation trenches in hard soil (Vide classification soil item A) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I |
| 158 | Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I. |
| 159 | Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I. |
| 160 | Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 161 | Centering and Shuttering |
| 162 | Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 163 | Centering and Shuttering |
| 164 | Providing RCC M-200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. |
| 165 | Centering and Shuttering |
| 166 | Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.Top of Wall |
| 167 | Centering and Shuttering |
| 168 | Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I |
| 169 | Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I |
| 170 | Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25x25x6 mm M.S. angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work , taxes all complete as per drawing specification and direction of E/I. |
| 171 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface |
| 172 | Carriage of materials from divisional store or kiln site or quarry site to work site including contractor\"s profit, loading, unloading, transportation etc. all complete . |
| 173 | Cement10KM lead |
| 174 | Steel 10KM lead |
| 175 | Sand36KM lead |
| 176 | Stone/Stone Chips11KM lead |
| 177 | Bricks6KM lead |
| 178 | N. H. Crossing (2 nos) |
| 179 | Manufacturing, providing and supplying spirally welded / ERW / SAW / fabricated M.S Pipe (Commercial Quality) including procurements of plates, gas cutting to required size, rolling, tack welding, assembling in suitable lengths to form pipes, welding on automatic welding machine and forming \"V\"edge on both ends of pipes in all respect etc. complete as per IS- 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible) |
| 180 | 300mm dia M.S pipe 10.0 mm thick (Casing) |
| 181 | Installation of product pipe by Guided Auger Boring method including making of entry and exit pits all related civil works like excavation ,shoring /strutting etc shielded excavation ,through auger boring process lowering of pipe segments in the jacking pit laying and jointing of product pipeline through jacking process from the jacking pit and restoration of site after project completion as per the instruction of the engineering -in - charge all complete exept the cost of the pipe average cover of 1.5 depth below GL. (upto 100 meter installation length ) |
| 182 | 300mm dia M.S pipe |
| 183 | Providing and applying primer first coat of intertol 49 W emaline 05/58 pipe coat or any other equivalent approved paint to the internal surface of pipe line at site. |
| 184 | 300mm Dia pipe |
| 185 | C.I. BODY BRASS TAP IN 8500 NOS. |
| 186 | Providing and making Male ended C.I Body brass spindle valve & seat bib cock of approved quality (wt. not less than 400 gms) with extra socket all complete as per specification & direction of E/I, for minimising wastage of water. |
| 187 | For 8500 Households |
| 188 | House Connection for 3000 nos Consumer. |
| 189 | Earth work in excavation ( as per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give 1 m av. cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/l. (For soil item A) |
| 190 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including\" cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 191 | ProvindingP.C.C M-150 with in norminal mix of (1:2:4) in foundation with approvedquality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including , screening , shuttering, mixingcement concrete in mixture and placing in position vibrating striking curing taxes and royality all complete as per building specifiaction and direction of E/I |
| 192 | Centering and Shuttering |
| 193 | Earth work in back fillingthe trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B) |
| 194 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curingwithall leadsand liftsof water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 195 | Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only assurance certificate from quality agencies like WRC / CIPET ( India) / DVGM / KIWA / SPGN etc. for usage in drinking water with quality system. The cost shall including cost all taxes, inspection charges transprotaion to work site and earth work involved , all complete job as per specification and direction of E/I. 20 mm dia pipe. |
| 196 | Providing and supplying G.I. pipes (Tata and equivalent make) for usage in drinking water with quality system, The cost shall include testing of all materials all taxes central , State , Municipal, Inspection charges transportation up to site transite insurance, loading, unloading, stacking etc. complete as specified and directed. |
| 197 | Lowering laying and jointing HDPE / MDPE pipe in proper position including all specials by Compression fitting / Electrofusion and But fusion jointing procedure including hydraulic testing as er relevent IS Code complete with all materials for jointing procedure like Electrofusion machine ,Electric mirrior/heater/But fusion welding machine with hydraulic testing and all labours as directed by engineer in charge as per IS-7634 part II |
| 198 | Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of E/l. (Pipe with socket to be supplied deparmentally free of cost). |
| 199 | Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram |
| 200 | Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/ (a) 20 mm dia and weight not less than 400 gram. |
| 201 | Providing and fixing 15 mm Dia male ended C.I Body Brass Spindle valve and seat bib cock of approved quality (Wt.not Less than 400 gms.) with extra socket all complete as per specification and Direction of E/I. |
| 202 | Supplying and fixing G.I. fittings of Approved make all complete as per specification and Direction of E/I |
| 203 | Elbow 20 mm |
| 204 | Elbow 15 mm |
| 205 | Reducing Socket 20 mm |
| 206 | Nipple 20 mm |
| 207 | Nipple 15 mm |
| 208 | Union Socket 20 mm |
| 209 | Socket 15mm |
| 210 | Socket 20 mm |
| 211 | Carriage of materials |
| 212 | Add 18% GST |
| 213 | Add 1% Labour Cess |
