Military Engineer Services-MES has published Tender For Addition / Alteration To Building No. 31, 91 And 198 At Af Stn Adampur.. Submission Date for this Tender is 21-07-2023. Building Work Tenders in adampur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 05-Jul-2023 | BoQ and Sch of credit | BOQ | 14-07-2023 |
| 2 | 14-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-07-2023 |
| Sl. No. | Item Description |
| 1 | BR WORKS |
| 2 | Providingand injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and roddingetc. complete all as specified. |
| 3 | Post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified. |
| 4 | PCC type E-2 (1:5:10), using 40 mm graded stone aggregates as in filling & mass concrete, complete all as specified. |
| 5 | Cement concrete, type B-0 (1:2:4), using 12.5 mm graded stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete all as specified. |
| 6 | Reinforced cement concrete, type A-1(1:1½:3), (nominal mix) using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 7 | Reinforced cement concrete, type A-1(1:1½:3),(nominal mix)using 20 mm graded stone aggregates as beams, cantilevers, bressumers, lintels over 1.5 metre clear span and the like complete all as specified. |
| 8 | Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified. |
| 9 | Brick work in half brick thick wall using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified. |
| 10 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified. |
| 11 | Cutting openings, through brick walls, built in cement mortar for door, window & other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective bk wk for under-pinning, including providing, fixing & removing shoring, cleaning & stacking bricks, removing surplus serviceable bricks, hardcore, etc., to store & rubbish not exc. 50 m, complete all as specified. |
| 12 | Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with fair finished surfaces of concrete, complete all as specified. |
| 13 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished surfaces of concrete, complete all as specified. |
| 14 | Factory made, 35 mm thick, second class hard wood,plain framed, hammer marked, skelton shutter (two panel to receive wire gauge) with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified. |
| 15 | Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 32 mm thick, ISI marked, complete all as specified. |
| 16 | Factory made solid PVC moulded door shutter, 28-30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick plain colur PVC sheet on back face, as shown on page 181 of MES Schedule Part-II, completeall as specified. |
| 17 | Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick wood grain colour PVC sheet reinforcedwith mild steel square tube, suppling & fixing in opening, complete all as specified. |
| 18 | Aluminium anodised barrel tower bolt of extruded section 150 mm long, ISI marked, complete all as specified. |
| 19 | Aluminium anodised barrel tower bolt of extruded section 200 mm long, ISI marked, complete all as specified. |
| 20 | Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extrudedsections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250 mm long,complete all as specified. |
| 21 | Stainless steel butt hinges 100 mm long, ISI marked, complete all as specified. |
| 22 | Mild steel, helical door spring 200 mm size,including roller and roller plate, ISI marked, complete all as specified. |
| 23 | Extruded aluminium anodised handles fabricated type with plate 150 mm long, ISI marked complete all as specified. |
| 24 | Mortice lock, brass body, 4 lever, 100 mm size, vertical type with two keys, complete all as specified. |
| 25 | Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws, complete. |
| 26 | Stainless steel 100mm size auto soft closing hinges fixed with stainless steel screws, ISI marked complete all as specified. |
| 27 | Stainless steel handles fabricated type with plate 200 mm long, ISI marked complete all as specified. |
| 28 | Door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws complete all as specified |
| 29 | Venetian blinds for windows with 1 mm thick venetian and holding rods, spring and control type including complete acessories for opening size exceeding 2 Sq.m but not exceeding 2.5 Sq.m each, design, colour & pattern as approved by GE, complete. |
| 30 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, all as specified. |
| 31 | Mild steel works in hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) in-cluding all necessary drilling, bolting or riveting, etc., confirming to Fe-290-Gde E-165, complete all as specified. |
| 32 | Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified. |
| 33 | Mild steel bolts exc 12 mm but not exc 20 mm dia at neck, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long, complete all as specified. |
| 34 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 35 | Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates quality confirming to grade Fe-290-Gde E-165, complete all as specified. |
| 36 | Mild steel rolled sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to grade Fe-290-Gde E-165, complete all as specified.. |
| 37 | Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., duly filled with PCC (1:3:6) type C-0, complete all as specified. |
| 38 | Factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., duly filled with PCC (1:3:6) type C-0, complete all as specified. |
| 39 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified. |
| 40 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel withconnecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified. |
| 41 | Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 42 | Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish, complete all as specified. NOTE: Frame work for ceiling shall be measured and paid separately) |
| 43 | Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 44 | Powder coated (minimum thickness of coating 50 micron) aluminium three track sliding window shutters (without sash bars) and frame havingthree shutters -two glazed&one gauged with & including 5.5 mm thick tinted glass, stainless steel wire cloth, locking arrangemnet & handle(s), alumn snap beading, jointing cleats, glazing clips, rubber packing rollers etc. complete comprising the following: - (a) Frame section size shall be61.85 mmx31.75 mmx1.5 mm. (c) Vertical rail section of shutter shall be of size 40x18x1.55mm. (d) Top & bottom rail section of shutter shall be 40x18x1.45mm. |
| 45 | Powder coated (minimum thickness of powder coating 50 micron) aluminium window grill (Type DG-102) along with U type frameof approved design / pattern with approved standard section and fixed to the window with CP brass / stainless steel screw @ 200mm c/c including cutting to grill to proper opening size etc. complete all as specified. |
| 46 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/ cladding to wall, fixed with self tapping screws comlete all as specified. |
| 47 | Pre-painted galvalume aluminium zinc coating GI based plane steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/cladding to wall, fixed with self tapping screws comlete all as specified. |
| 48 | 18/19 mm thickHigh density moisture resistant board, flat pressed, fixed as in modular kitchen cabinets, cupboards or similar works with necessary screwscomplete. |
| 49 | 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified. |
| 50 | 75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection,and joints shall be sealed with joint sealing comound grade "A" complete all as specified. |
| 51 | 75 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified. |
| 52 | Granite jet black shade, 15-18 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished,bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified. |
| 53 | Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified. |
| 54 | Glazed ceramic coloured tiles 7mm thick,area of each tile exc. 0.17 Sq.m but n. exc. 0.19 Sq.m on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 10 mm thick bedding layer in cement mortar (1:4), complete all as specified. |
| 55 | Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.06 Sq.m but n. exc. 0.11 Sq.m,laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:4), complete all as specified. |
| 56 | Non skid dark shade vitrified (double charged) tiles 9-10mm thick (square/ rectangular) area of each tile exc. 0.42 Sq.m but n. exc. 1 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:4), complete all as specified. |
| 57 | Non skid dark shade vitrified (double charged) tiles 9-10mm thick (square/ rectangular) area of each tile exc. 0.42 Sq.m but n. exc. 1 Sq.m, as in skirting or vertical surfaces etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 10 mm thick bedding layer in cement mortar (1:4), complete all as specified. |
| 58 | Linoleum sheet, plain coloured, 3.20-3.30 mm thick, laidin floors with an approved adhesive including stretching, cutting and fitting, sealed down , complete all as specified. |
| 59 | 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of shape approved by GE, made by table vibratory method using PU mould, laid in required pattern over and including 50mm thick compacted bed of coarse sand, compacting through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete. |
| 60 | Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fairon walls in cement mortar (1:6)complete all as specified. |
| 61 | Rendering 15 mm thickon fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified. |
| 62 | Supply only water proofing compound, ISI marked, complete all as specified. |
| 63 | Two coats of interior acrylic distemper/oil bound distemper on old wall surfaces, including preparation of surfaces, complete all as specified. |
| 64 | Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats& smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of interior primer |
| 65 | Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats& smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of interior primer |
| 66 | Plain sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.min each pane complete all as specified. |
| 67 | Figured glass 4mm thick ordinary quality and glazing with oil puttyin squares n. exc. 0.5 Sq.min each pane complete all as specified. |
| 68 | One coatof synthetic enamel paint over wood or wood based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. |
| 69 | Two coatsof synthetic enamel paint over & including a coat of pink primer over wood and wood based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. |
| 70 | Two coatsof synthetic enamel paint over & including a coat of cement primer over plastered or concrete surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. |
| 71 | Two coatsof synthetic enamel paint over & including a coat of red oxide primer over steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified. |
| 72 | Disconnecting existing tanks of capacity exceeding 250 litre but not exceeding 500 litre, setting aside (or lowering if required) for cleaning/roof repair etc. and hoisting, reconnecting and re-fixing in position after necessary cleaningby removing all scale and dirt etc. including cleaning mouth of circulating service pipescomplete, all as specified. |
| 73 | 500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN REPAIRS, complete all as specified including the following acessories: - (i) Gun metal ball valves, high pressure, with metal rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, IN REPAIRS, suitable for 20 mm bore GI pipe, complete all as specified. (iii) Gun-metal stop valve (quarter turn type)with MS lever handle, suitable for 20 mm bore GI tubes, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN REPAIRS, complete all as specified. |
| 74 | Steel tubes 15 mm bore ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections from existing location, complete all as speciifed. |
| 75 | Steel tubes 20 mm bore ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors,including taking up or down steel tubing and connections from existing location, complete all as speciifed. |
| 76 | Steel tubes 25 mm bore ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, (For Urinal flush cock) complete all as speciifed. |
| 77 | Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange,quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6510 or equivalent make mentioned in Appendix "B". |
| 78 | Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange,quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6518 or equivalent make mentioned in Appndix "B". |
| 79 | Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange,quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS,complete. MAKE: PRAYAG Cat No. 6508 or equivalent make mentioned in Appendix "B". |
| 80 | Pillar tap, cast copper alloy, chromium plated fancy type, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6502 or equivalent make mentioned in Appendix "B". |
| 81 | 125mm size overhead ABS shower with cast copper alloy chromium plated arm 225 mm long with flange andfixed in position, IN REPAIRS, complete. MAKE: PRAYAG Cat No. BS-76 or equivalent make mentioned in Appndix "B" |
| 82 | Vitreous China wash down water closet pan (pedestal pattern), white ISI marked, including stainless steel body Jet spray (L-bend) with1.50 metre long braded tube tube, IN REPAIRS,complete all as specified MAKE OF EWC: PRAYAG Cat No. 4016 or equivalent make mentioned in Appendix "B". |
| 83 | PVC seat & cover, IN REPAIRS,complete all as specified MAKE OF EWC: PRAYAG Cat No. 4016 or equivalent make mentioned in Appendix "B". |
| 84 | Toilet paper holder, brass chromium plated body IN REPAIRS,complete all as specified MAKE OF EWC: PRAYAG Cat No. BA18 or equivalent make mentioned in Appendix "B". |
| 85 | Vitreous China wash hand basin, counter type, white, oval shape of size 560 x 410 x 180 mm including fixing acessories like 32mm dia CP waste coupling, PVC collapsible waste pipe IN REPLACEMENT, complete. MAKE:PRAYAG Cat No. 4790 or equivalent make mentioned in Appndix "B". |
| 86 | Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked,including fixing acessories like rag bolts etc. with CP waste coupling half or full threaded suitable for & including 32 mm size PVC solid waste pipe,IN REPAIRS, complete all as specified. MAKE: PRAYAG Cat No. 4645 or equivalent make mentioned in Appendix "B" |
| 87 | Vitreous China half stall Urinal pot, white, size 345 x 320 x 560 mm, with & including cast copper alloy, half or full threaded chromium plated waste couplingsuitable for & including 32 mm size PVC waste/discharge pipe, rag bolts,IN REPAIRS, complete. MAKE OF URINAL: PRAYAG Cat No. 4998 or equivalent make mentioned in Appendix "B". |
| 88 | Health faust with 1 metre SS tube & hook complete. MAKE OF URINAL: PRAYAG Cat No. BEA-97 or equivalent make mentioned in Appendix "B". |
| 89 | Flush cock (lever type) 25 mm size for urinals complete. MAKE OF URINAL: PRAYAG Cat No. BEA-32 or equivalent make mentioned in Appendix "B". |
| 90 | PVC flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories,IN REPAIRS, complete. MAKE: PRAYAG Cat No. 502 or equivalent make mentioned in Appendix "B" |
| 91 | Looking mirror 600 x 600 mm, selected quality glass 5.5 mm thick, mounted on PVC ply not less than 4 mm thick, and provision of PVC frame alround fixed with chromium plated brass screws and rawl plugs, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 553 or equivalent make mentioned in Appendix "B". |
| 92 | 5-6 mm thick looking glass fixed over not less than 6 mm thick PVC ply and approved shade PVC beading not less than 15 mm wide alround with and including all fixing acessories, complete all as specified. |
| 93 | Glass shelf 500x125 mm with brass brackets and fixed to wall with chromium plated brass screws and rawl plugs, complete. MAKE: PRAYAG Cat No. BEA-45 or equivalent make mentioned in Appendix "B". |
| 94 | Brass chromium plated towel rail500-600 mm long, fixed to wall with SS screws and PVC rawl plugs, IN REPLACEMENT, complete. MAKE: PRAYAG Cat No. BA-10 or equivalent make mentioned in Appndix "B". |
| 95 | Stainless steel soap dish, fixed to wall with SS screws and PVC rawl plugs, complete. MAKE: PRAYAG Cat No. BA-15S or equivalent make mentioned in Appendix "B". |
| 96 | Stainless steel round slotted grating with frame, 100 mm size fixed in position with cement joints,complete all as specified. |
| 97 | PVC connections 15 mm size of length 600 mm with PTMT nuts,complete all as specified. |
| 98 | Stainless steelpeg set of six, fixed to wall with SS screws and PVC rawl plugs, complete. MAKE: PRAYAG Cat No. BEA-30 or equivalent make mentioned in Appendix "B". |
| 99 | uPVC pipes 75 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified. |
| 100 | uPVC pipes 110 mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors/walls as SWR pipes, IN REPAIRS, complete all as specified. |
| 101 | uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 75 mm external dia,IN REPAIRS, complete all as specified. |
| 102 | uPVC/PVC bend any radius, suitable for uPVC soil waste discharge pipes 110 mm external dia,IN REPAIRS, complete all as specified. |
| 103 | uPVC/PVC vent cowl 75 mm external dia, complete all as specified. |
| 104 | uPVC floor trap,suitable for uPVC soil waste discharge pipes 75 mm ext dia, embedded in PCC type B-1(1:2:4), IN REPAIRS, complete all as specified, |
| 105 | Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, complete all as specified. |
| 106 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified. |
| 107 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified. |
| 108 | Taking down cement plaster of any description on brick walls or concrete surfaces etcincluding raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 109 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 110 | Demolition brickwork or stone / boulder masonrybuilt in cement mortar including all quoins, arches, pillars etc complete all as specified. |
| 111 | Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified |
| 112 | Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided all as specified. |
| 113 | Dismantling timber scantling 40 sq. cm and over in section, in any position, complete all as specified. |
| 114 | Dismantling framed wooden trusses of any description of span not exc 10 m, complete all as specified. |
| 115 | Dismantlingasbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified. |
| 116 | Dismantlingplain or corrugated steelsheets in roof coverings, complete all as specified. |
| 117 | Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified. |
| 118 | EM WORKS |
| 119 | Excavation in trenches n. exc 1.5 m wide for foundations, laying cables / pipes etc. not exceeding 1.5 m deep and getting out in soft/ loose soil complete, all as specified. |
| 120 | Returning filling in including spreading, levelling, watering and well ramming in layers notexceeding 25cm thick complete, all as specified. |
| 121 | Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete, all as specified. |
| 122 | Clean dry sand ( locally available) as cushioning for under ground cable 230 mm thick (one layer of 80 mm thickness before laying the cable and other layer of 150 mm thickness after laying the cable) complete all as specified. NOTE:- Punned down thickness (over all 180 mm) shall be considered for measurement and payment. |
| 123 | Bricks as specified in PS clause 5.1, laid flat and dry in trenches over the cable for protection as length perpendicular to the direction of cable adjacent to each other complete, all as specified. |
| 124 | Steel tubes 40 mm bore ‘light grade’, galvanized with all fittings andfixed to poles/ walls/ under floors/ under road etc complete all as speciifed. |
| 125 | Supply, laying, jointing & testing of LT XLPE insulated cable screened,bedded, galvanised steel strip or wire armourd cable(heavy duty) 1100 volt gradewith aluminium conductor conforming to IS-7098 (Part-I -1988)laid in trenches/ ducts/ through pipes/ in floors / underroads/ hard standing /along poles and testing including takind down existing cablecomplete all as specified of sectional area 25 Sq. mm, 04 core. |
| 126 | Supply, laying, jointing & testing of LT XLPE insulated cable screened,bedded, galvanised steel strip or wire armourd cable(heavy duty) 1100 volt gradewith aluminium conductor conforming to IS-7098 (Part-I -1988)laid in trenches/ ducts/ through pipes/ in floors / underroads/ hard standing /along poles and testing including takind down existing cablecomplete all as specified of sectional area 35 Sq. mm, 04 core. |
| 127 | Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed stranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, with and including GI terminal boxes with 3 mm thick plastic laminated sheet cover having necessary cutting for fixing switches/ socketscomprising the following: - |
| 128 | One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. or for bell/buzzer with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified. |
| 129 | One Socket outlet three pin, 6 Amp, on the same board, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified. |
| 130 | One Socket outlet three pin, 6 Amp, independent, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty concealed conduit all as specified. |
| 131 | One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified. |
| 132 | One socket outlet three pin, 6/16 Amp, independent, with 4 Sq. mm (nominal area) cable & 4 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified. |
| 133 | NOTES: (a) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule "A". (b) GI boxes shall be fixed flushto walls in position with cement mortar (1:4) complete all as directed. (c) Conduit shall be laid on surface in case of RCC ceiling surfaces. |
| 134 | Switch piano flush button single pole one way, 6 Amp complete all as specified. |
| 135 | Switch piano,bell/buzzer push, flush button single pole one way, 6 Amp complete all as specified. |
| 136 | Switch piano flush button single pole one way, 16 Amp complete all as specified. |
| 137 | Socket outlet multipurpose having provision for 2&3 pin, 6 Amp, flush type, complete all as specified. |
| 138 | Socket outlet multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, flush type complete, all as specified. |
| 139 | Ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified. |
| 140 | Lamp (angle) holder, insulated body, cord grip pattern, complete, all as specified. |
| 141 | Electric buzzer AC 230 volt, single pole, Ding Dong type complete, all as specified. |
| 142 | Fan regulator (electronic) suitable for 48”/56” sweep fan, step down type, single phase, complete all as specified. |
| 143 | Sub main wiring (with approved colour coding as per IS) with single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing in conduits, complete all as specified for the following: - |
| 144 | 2 runs of 4 Sq. mm main cable + 1 run of 4 Sq. mm earth cable |
| 145 | 2 runs of 6 Sq. mm main cable + 1 run of 6 Sq. mm earth cable |
| 146 | NOTES: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii)For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE" |
| 147 | Rigid non metallic, PVC concealed conduit, 20 mm bore, medium grade, ISI marked, inclusive of all fitings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing acessories such as couplers, lock nuts, saddles, pipe hook etc. for sub main wiring and the like complete all as specified. |
| 148 | Sheet metal enclosure for DB for fixing MCB’s, isolators etc., having IP-43 protection, suitable for surface and flush mounting, complete all as specified comprising the following: - |
| 149 | SPN, 2 way with 200 Amp rated bus bar, 240 V, single door type |
| 150 | SPN, 4 way with 200 Amp rated bus bar, 240 V, double door type. |
| 151 | SPN, 8 way with 200 Amp rated bus bar, 240 V, double door type. |
| 152 | SPN, 12 way with 200 Amp rated bus bar, 240 V, double door type. |
| 153 | TPN, 4 way with 200 Amp rated bus bar, 415 V, double door type having housing and including MCCB 4 pole 63 Amp, 16kA. |
| 154 | MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, "C" curve type of rating6 to 32 Amp complete all as specified. |
| 155 | MCB suitable for 240 volt AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, "C" curve type of rating 40-63 Amp complete all as specified. |
| 156 | Blanking plate to cover unused space in DB"s complete all as specified.. |
| 157 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 volt, breaking capacity not less than 10 kA, complete all as specified. |
| 158 | Earthing with and including GI earth plate electrode 6 mm thick of size 600 mm x 600 mm with 4 Sq. mm GI wire earthing lead complete all as shown in electrical plate No. 3 and specified in Particular Specifications clause 19.3.3.1 of contract, IN REPAIRS. NOTE: (a) The unit rate includes earthing lead and protection pipe upto 7.5 metre from top of earth plate. (b) Factory made PCC pit with cover shall be fixed at least 500 mm away from earth pit. |
| 159 | Envirnment friendly, modern design, energy saving surface mounted, decorative 10 W bulk head LED luminaire with premium quality diffuser fo glarefree light, 6000K,complete. MAKE: Havells Cat No. HEXAFT10WLED857SSYMBOPCor equivalent in makes mentioned in Appendix "B" here-in-after. |
| 160 | Recess mounted round shape bottom opening LED 12W cool day light luminaire CRCA powder coated housing, IP- 54 protection, suitable for grid ceiling lumen output should not be less than 90 lumens per watt complete. MAKE: Havells Cat No. EDGEPRONEORDDLR12WLED840S or equivalent in makes mentioned in Appendix "B" here-in-after. |
| 161 | Surface mounted envirnment friendly LED batten with powder coated aluminium housing with intigrated electronic driver with THD<10% LED 20 W lighting fixture with extruded polycarbonate, 6500K, lumen output should not be less than 90 lumens per wattcomplete. MAKE: Havells Cat No. LUMILINESMART20WLED865PCWHor equivalent in makes mentioned in Appendix "B" here-in-after. |
| 162 | Surface mounted envirnment friendly LED batten with powder coated aluminium housing with intigrated electronic driver with THD<10% LED 10 W lighting fixture with extruded polycarbonate, 6500K, lumen output should not be less than 90 lumens per wattcomplete. MAKE: Havells Cat No. LUMILINEBS9WLED830SPCWHor equivalent in makes mentioned in Appendix "B" here-in-after. |
| 163 | Ceiling fan complete with blades, down rods, stepped type electronic regulator and accessories, 230 volt, 1200mm sweep with service value 6.00 BEE with brushless direct current motor (BLDC) including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable complete all as specified. |
| 164 | Exhaust fansteel body of size 300mm sweep with louvers, 900 RPM 230 volts single phase AC supply complete with bolt, nuts and washer and including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable from ceiling rose to exhaust fan for giving connection complete all as specified. |
| 165 | Exhaust fan steel body of size 380mm sweep with louvers, 900 RPM 230 volts single phase AC supply complete with bolt, nuts and washer and including PVC insulated and overall sheathed flexible 3 core 0.5 Sq.mm copper conductor cable from ceiling rose to exhaust fan for giving connection complete all as specified. |
| 166 | Electric water heater storage type steel body with copper inner tank and heating element upto 2 kw capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, steel PVC connector for hot water etc complete all as specified. |
| 167 | Electric metre temperature proof, LED display with polycarbonate cover 3 phase 415 volt , 10-60 amp alongwith CT 100/5 amp, accuracy class- I 50 Hz, conforming to IS 13779, IP-54 with parameters to show data, time, current reading, load, PF, voltage and Kwh etccomplete all as specified. |
| 168 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with batten, casing caping of MS or and PVC conduit on surface or concealed, including switches, ceiling roses, pendants, regulators, sockets, mild steel terminal boxes etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified. |
| 169 | Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit consealed/surface etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified. |
| 170 | Dismantling of unservisible existing DBs of any description with all accessories and MCBs, isolators etc.and making good surface as per existing, complete all as specified. |
| 171 | Taking down carefully light fitting of any description, complete all as specified. |
| 172 | Taking down carefully electric bell/buzzer of any description, complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
