Military Engineer Services-MES has published Tender For Repair/Replacement To Flooring, Plastering, Roofing, Joinery Cp/Sanitary Fittings And Certain Others Works Of Mh Gaya At Mil Stn Gaya. Submission Date for this Tender is 22-07-2023. Shed Construction Tenders in gaya Bihar. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Jul-2023 | BOQ Corrigendum | BOQ | 15-07-2023 |
| 2 | 15-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-07-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | M&L Brick work using old size bricks with sub class "B" bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 4 | Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 5 | M&L for rendering 10mmthick in ceiling on brick work or concrete surfaces in CM 1:3, finished even and smooth without using extra cement all as specified and directed. |
| 6 | M&L for rendering 10mm thick internal surfaces on fair faces of brick work or concrete in cm 1:6 as directed by Engr-in-charge. |
| 7 | M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC measured and paid separatly |
| 8 | Supply only liquid water proofing compound ISI marked. |
| 9 | M&L for applying 3mm thick wall care putty incl preparation of newly plastered wall/ceiling surfaces |
| 10 | M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of newly plastered wall surfaces. |
| 11 | M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of newly plastered surfaces as in ceiling. |
| 12 | M&L for 2 coats cement base paint over a coat of primerincluding preparation of newly plastered wall surfaces complete |
| 13 | Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) |
| 14 | M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed |
| 15 | S & Fchicken wire mesh made out of low carbon wire 0.30mm thick, annealed, mesh size (dist between the faces of hexagon) 12 mm complete all as specified and directed. |
| 16 | S& F PVC ( SWR ) nahani trap / floor trap 75 mm dia all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince |
| 17 | M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed |
| 18 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid & dry or laid dry & pointed. |
| 19 | M&L for cleaning and racking out the joint filling of floor or wall tiles and refilling the same with white or coloured cement to match the colour |
| 20 | M & L coloured Non Skid ceramic coloured jointless tiles (square/rectangular) area of each tile exc 0.06 Sqm but not exc. 0.16 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6.including taking down existing tiles. |
| 21 | M&L for Vitrified tiles double charge light shed 10 mm thick (square or rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed with and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 including taking down existing tiles complete. |
| 22 | M & L coloured digital Glazed ceramic coloured tiles in vertical surfaces area of each tiles not exceeding 600x300 sqm x 7-8 mmset and jointed in neat cement slurry and pointed in white or coloured cement to matchincl 10mm thick rendering in cement mortar 1:4as backing for tiles incl taking down old tiles complete all as specified and as directed. |
| 23 | M & L Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 |
| 24 | M & L Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and incl 10mm thick rendering in cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing complete. (Note : Work will be carried out as in repair of patches in lieu of existing broken flooring) |
| 25 | S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 26 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. |
| 27 | Cutting holes into or through brick walls built in cement mortar superficial area exc 150Sqcm but not exc 400 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required. |
| 28 | M & L for TMTbars 8 mm dia & over cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete |
| 29 | M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc. |
| 30 | Dismantling of wall and ceiling boards, any thickness including cover fillets complete. |
| 31 | S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete, 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system all as specified and directed by the Engineer-in-Charge. Make Everest/Armstrong. |
| 32 | M&L for preparation and filling of pitting/cracks (including V groove cutting of cracks/deepening) on surfaces with crack seal and finishing the surfaces as per existing treatment complete all as specified and directed. Make : Sika/Asian Paint/Dr Fixit/Pidilite |
| 33 | Taking down existing aluminium door shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace the defective jointing cleats/screws all as specified and directed by Engr-in-Charge. |
| 34 | S & F of taper clips, tee, angles and other items for aluminium door complete. |
| 35 | S & F ofrubber gasket for aluminium door glass complete |
| 36 | M & L for 25 mm thick Providing precast cement concrete 1:2:4 type B-0 as in louvres and jallies (measured solid), including all mouldings and set in cement mortar 1:4 |
| 37 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each |
| 38 | S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified.Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section.(iii)The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight(iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 39 | Supply only Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete. |
| 40 | Supply only 3 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane |
| 41 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete. |
| 42 | M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed |
| 43 | S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 44 | S&F PVC (SWR) bends ISI marked any radius of 75 mm borewithaccess door complete all as specified and directed. |
| 45 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 46 | PVC (SWR) vent cowl for 110 mm bore pipe |
| 47 | PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement |
| 48 | S & F as in repair Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete. Make : Jaguar/Hindware/Kohler |
| 49 | S & F of 10 litre PVC valveless, syphonic action type, Dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets Make:-Jaguar/ Hindware /Commander |
| 50 | S&F in repair vitreous china wash basin white flat back size 630 x 450mm including CP pillar taps, fancy type, swan neck long neck,waste pipe, waste coupling, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastnersall as specified and directed. (Make:-Prayag/ Hindware /Jaguar/Parryware) |
| 51 | Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) |
| 52 | S &F as in repair chromium plated shower rose 125 mm dia with 600mm CP shower arm fancy type fixed to 15mm bore pipeall as specified and directed.(Make-Plumber/Prayag/Hindware) |
| 53 | Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 54 | Supplying and laying as in repair of CPVC pipes 32mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed. |
| 55 | Taking down of existing GI Tubing 20 mm dia complete. |
| 56 | S & F of CPVC pipes MBTA/FBTA fittings such as tee, elbow, socket and Tank union etc of 25 mm outer dia. |
| 57 | S & F as in repair of CPVC pipes MBTA/FBTA fittings such as tee, elbow and socket etc of 20 mm outer dia. |
| 58 | S & F as in repair of CPVC ball valve/gate valvefittings such as tee, elbow and socket etc of 25 mm outer dia. |
| 59 | S&F in for 15mm diabib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule. (Make : Jaguar/Prayag/Hindware) |
| 60 | S&F 15mm angle Stop valves, cast copper alloy, chromium plated fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed (Make : Jaguar/Prayag/Hindware) |
| 61 | Supply only PVC waste pipe 32 mm dia for urinal/Kitchen sink/Basin. make : Prayag |
| 62 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 63 | S&F of 1000 Lrts capacity white rotational Moulded ploythene water storage tank (cylinderical vertical with closed top) multilayered hoisted and fixed in position incl dismantling of existing tanks. |
| 64 | M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 65 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete and kept in safe custody at a place directed by Engr-in-Charge for refixing the same all as specified and directed. |
| 66 | S & F of Pre-painted galvalume aluminum zinc coatingAZ-150 GI based tile profile galvalum sheet 0.50mm thick of red colour as in roof covering/cladding to wall inlcuding cutting, moulding in shape fixed with self tapping screws as specified. |
| 67 | S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc nd similar work conforming to Fe.290. Gde-E-165 complete all as directed & specified. |
| 68 | S & F of framed work as in ornamental structure including moulding, cuttings, and made to shape as directed with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars and similar work conforming to Fe.290. Gde-E-165 complete all as directed & specified. |
| 69 | Disconnecting PVC water storage tanks of 500/1000ltrs capacity cleaning and removing all scale & dirt etc from tanks and from method of circulating pipe including endorsing dirt of cleaning in same position all as directed. |
| 70 | S&F brass chromium plated Shelf glass/Corner self assembly with CP screws etc complete all as spd (Make-Prayag) |
| 71 | S & F CP Jet spray complete all as specified & directed. (Make-Plumber/parryware/ Essco) |
| 72 | S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etccomplete as in repair all as specified. Make : Prayag |
| 73 | S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco) |
| 74 | S&F in repair 15 mm dia two way bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make- prayag ) |
| 75 | S& F cp towal rail /towal ring all as specified and directed by engr-in- charge. |
| 76 | S& F cp toilet paper holder all as specified and directed by engr-in- charge. |
| 77 | S&F ofCP wall mixer( three in one) 15 mm borefor bathroom and all as specified and directed by engr- in -charge . |
| 78 | S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifiedand directed |
| 79 | S & F of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 80 | Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame). |
| 81 | Taking down chowkhats for frames exc 1.5 Sqm but not exc 4.00 Sqm. |
| 82 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 83 | S&F Solid PVC factory madeDoor shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC "C" channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling ofplain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing |
| 84 | M & L for 32 mm thick Flush shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc. |
| 85 | M & L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 86 | M & L for pressed steel door frame size 165 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 87 | M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces. |
| 88 | M&L for apply one coat of synthetic enamel paint on old painted surfaces of wood and wood based of any description, over 10cm in width or girth complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
