Annual Repair And Maintenance Of Bunds And Drains. Installation Of Display Board At Various Locations Of Drain No.6 And Metal Beam Crash Barrier On Left Bank From Rd 1725M To Rd 5000M Of Drain No.6., Delhi-Delhi
TDR : 38311963
Tender Notice
BOQ
Expired
Delhi
Delhi
Annual Repair And Maintenance Of Bunds And Drains. Installation Of Display Board At Various Locations Of Drain No.6 And Metal Beam Crash Barrier On Left Bank From Rd 1725M To Rd 5000M Of Drain No.6.
Name of Work: Installation of display board at various locations of Drain No.6 & Metal beam crash barrier on left bank from RD 1725m to RD 5000m of Drain No.6.
Sl. No.
Item Description
1
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil.
2
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
3
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
4
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5
Type - A, \"W\" : Metal beam crash barrier (Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post,150x75x5 mm spaced 2m centre to centre,1.8m high, 1.1m below ground/ road level, all steel parts and fitments to be galvanised by hot dip process, all fitting to conform to IS:1367 and IS:1364 metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm, 330 mm long complete as per clause 811.3).
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
