Public Works Department-PWD has published Tender For Redevelopment Of Rajaji Marg Asset By Way Of Construction Of 1 Bhk Flat For The Employees Of Ut Of Jk At Kashmir House Raja Ji Marg New Delhi. Submission Date for this Tender is 05-07-2023. Building Work Tenders in New Delhi Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil. |
2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand:8 graded stone aggregate 40 mm nominal size) |
4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand:6 graded stone aggregate 40 mm nominal size) |
5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
7 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
8 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
10 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL antitermite treatment. Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor: |
11 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size |
12 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
13 | Centering and shuttering including strutting, propping etc. and removal of form for |
14 | Foundations, footings, bases of columns etc. for mass concrete |
15 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
16 | Edges of slabs and breaks in floors and walls Above 20 cm wide |
17 | Suspended floors, roofs, landings, balconies and access platforms. |
18 | Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. Cold twisted bars |
19 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood - 35mm |
20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length First class kail wood |
21 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
22 | Providing and fixing 2nd class teak wood architrave on door/window frame (50mmx10mm) as per approved design |
23 | SS Hinges 6" (door/windows) |
24 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First Class Kail wood -35 mm thick |
25 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand) |
26 | Providing & fixing cupboard made out of 19mm thick commercial board & 6mm ply on back ISI marked of standard quality as approved) all inside surface finished in sunmica of approved shade & quality complete in all respects including all hardware fittings, handles, hinges of approved brand |
27 | Providing & fixing under counter kitchen cabinets madeout of 19mm thick water proofcommercial board, 6mm thick ply on backside and all inside/outside surfaces fitted with sunmica and piano hinges of standard quality incld. Handles, tower bolts and all hardware fittings complete job. |
28 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. 18 mm thick |
29 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
30 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
31 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
32 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
33 | Removal of wasteby mechanical means and disposal of the same beyond municipal limits |
34 | Dismantling of 7Nos. existing structures manually/mechanically of approximate plinth area 50"*10" and height 10" including by way of dismantling partial iron/steel girder roof slab work (1.5-ftthickness), CC work, RCC work, brick work, tile work; dismantling and taking out sanitary fittings and fixtures, GI/AC sheets, reinforcements, taking out servicable/unservicable doors and windows complete job including taking out of mortar from bricks, straightening of reinforcement bars etc. Also disposal and stacking of servicable/unservicable mulba with in 50 mtrs. lead at site. |
35 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
36 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
37 | 1 mm thick |
38 | 2 mm thick |
39 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. (two or more coats on new work) |
41 | P/F 19 mm thick commercial board in shelves, shutters or wherever damagedand lipped with veneer including melamine polishing complete job. |
42 | Providing and fixing of sanitary fittings , fixtures complete job. |
43 | European WC( one piece) with lidwith all fittigs inclu. Cutting and making good the wall and floors wherever required (hindware/ Parryware/kerovit or equivalent) |
44 | Angle valve |
45 | Wall mixer (parryware or equivalent) |
46 | Long body bibcock (Parry ware or equivalent) |
47 | Short body bibcock (Parry ware or equivalent) |
48 | Kitchen Sink (18"*24") |
49 | Sink Mixer (Parry ware or equivalent) |
50 | Washbasin (Parry ware or equivalent) 20"x16" |
51 | Washbasin Mixer (Parryware or equivalent) |
52 | Waste pipe |
53 | Waste coupling |
54 | C.P. Jali |
55 | Shower(Parry ware or equivalent) |
56 | Shower rod (Parry ware or equivalent) |
57 | PVC connection 24 "" |
58 | Jet (Parryware or equivalent) |
59 | Providing and fixing hardware fittings |
60 | Godrej Door lock |
61 | Door Closer Hardwyn |
62 | Almirah lock |
63 | Cylindrical lock |
64 | Door eye |
65 | SS Tower bolt 6" |
66 | SS handles 6" |
67 | SS Door stopper |
68 | Door seal |
69 | Aldrop 8" |
70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
71 | Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required(Raising depth of manhole to be paid separately).Rectangular manhole 120x90 cm with circularcover 500 mm dia of grade MD - 10 |
72 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
73 | Providing and fixing of fibre sheet on door(meshed)/chajjas 4mm thick with nails and screws complete job. |
74 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. |
75 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
76 | 15mm nominal outer dia pipes. |
77 | External work including trenching, refilling etc |
78 | 50mm nominal outer dia pipes |
79 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) |
80 | 15 mm dia. nominal bore-medium |
81 | 50 mm dia. nominal bore-medium |
82 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete - 50 to 80 mm nominal bore |
83 | Providing and fixing PVC pipes including all fittings .supreme , prakash or equivalent(external work) |
84 | 110mm nominal bore (medium) |
85 | Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. |
86 | 180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
87 | Providing and fixing PVC pipe embedded in 1: 5: 10 inclu. fittings, trenching and refilling and making good the floor/wall complete job. |
88 | 150mm nominal bore (medium) |
89 | 200mm nominal bore (medium) |
90 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
91 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete |
92 | For pipes 100 to 250 mm diameter |
93 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.(1 kg of water proofing material in 50 kg or 1 bag of cement) |
94 | Carriage charges of materials by mechanical transport complete |
95 | Sand/ Agg (59 km) |
96 | Bricks (80 km) |
97 | Steel (40 km) Qty. vide Item 14 |
98 | Cement = 1225 bags |
99 | Labour engaged for cleaning of adjoining roofs, sweeping of surrounding premises of existing old staff qtrs by collecting rubbish, leaves, scattered materials etc. during the construction phase on regular basis. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail