Tamil Nadu Generation And Distribution Corporation Limited-TANGEDCO has published Tender For Improvement Work Of Executive Engineer General Chamber. Submission Date for this Tender is 06-07-2023. Building Work Tenders in Ramanathapuram Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Brickwork in CM 1:5 mix using II class chamber bricks of size 9"x 4 3/8"x 23/4" for basement and superstructure including cost of all materials, labour, lead, lift, curing, etc., complete. |
| 2 | Supplying and filling of M sand for foundation and basement with well watering and consolidation as per specn. including cost of all materials labour, lead, lift, etc., complete. |
| 3 | Plastering with CM.1:5 mix using 20mm thick for inside & outside walls, including cost of all materials, labour, lead, lift, etc, complete. |
| 4 | Paving the floor with best quality Joint free Rectified anti skid Ceramic Flooring Tiles 305 x 305 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. |
| 5 | Manufacturing and fixing in position of anodised aluminium fully glazed partition using 100x44x2mm box section for frame and 95x44x2mm for shutter bottom style and 65x44mm section for other side style with glazing clips rubber beadings hinges handle, hydraulic door closer etc & bottom with 4mm thick Aluminium composite panel board and on top including cost of materials labour, lead, lift etc complete. Aluminium partition |
| 6 | Manufacturing and fixing in position of anodised aluminium fully glazed partition and door using 100x44x2mm box section for frame and 95x44x2mm for shutter bottom style and 65x44mm section for other side style with glazing clips rubber beadings hinges handle, hydraulic door closer etc & bottom with 4mm thick Aluminium composite panel board and on top including cost of materials labour, lead, lift etc complete. Door size 0.60x2.10m (Single leaf door) |
| 7 | Labour charges for removing the existing aluminium partition panels and re-fixing the same at a different location, Removing and re-aligning the existing electrical wirings etc complete. As directed by the Engineer Incharge at site. |
| 8 | Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., supply and fixing of PVC Health faucet of reputed brand, including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Assistant Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting |
| 9 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. |
| 10 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm without pedestal, good quality mirror with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. |
| 11 | Supply and fixing of 110mm dia PVC pipe with all accessories like clamp, bend, paste etc with all cost of materials, lead, lift etc complete for sewer pipe |
| 12 | Supply and fixing of 25mm dia CPVC pipe from the main line to the toilet portion including all fittings materials, lead, lift, etc complete. |
| 13 | Supplying, fixing in position of 25 mm dia gunmetal gate valve leader, zolots make of best qualityincluding cost of all materials, labour, lead, lift etc complete. |
| 14 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. |
| 15 | Supply and fixing of 9W LED bulb for inside the toilet portionincluding cost of all materials, labour, lead, lift etc complete. |
| 16 | Supply and fixing of 225 mm (9") sweep (light duty) AC exhaust fanincluding cost of all materials, labour, lead, lift etc complete. |
| 17 | Supplying and fixing of 20W LED T4 Tube light over head in the EE General Room including cost of all materials, labour, lead, lift etc complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
