Tender For Providing Miscellaneous Items Work At Rpo Mora Office At Chendani Koliwada Tal. And Dist. Thane-Item No.1 Providing And Fixing H.D.P Container One Piece Moulded Water Tank Made Out Of High Density Polythyler And Built Corrugated Inclusive Of Delivery Upto Destination Hoisting And Fixing Of Accessories Such As Inlet , Outlet Overflow Pipe Inclusive Of All Tanks Capacity Between 200 To 1000 Liters. Item No. 2: Providing And Constructing Granite Kitchen Platform With Fixing Of Stainless Steel Sink 600Mm X 450 Mm Size As Per Detailed Drawing Including Vertical Both Side Polished Kadappah Stone 25 To 30 Mm Thick Supports With Kadappah Top 35 To 40 Mm Thick And Polished Granite 16To20mm Top With Side Strips Of Granite At Front And Both Sides Of Platform Raised With Two Vertical Granite Supports 15 Cm Height And Top Granite Of 75X40 Cm Including Cutting, Opening For Sink Of Required Size In Kadappah As Well As Granite Etc. Complete. ( Platform Top Size ___ M X 0.60 M And Height Is 0.75 M ) Item No.3 Providing And Erecting Y Type Barbed Wire Fencing With Seven Rows Of Wire With 2.45 Mm Diag.I.Pipe ( Rezan / Concenti Deletedire 0.75Mm Dia ) With Hot Dip And G.I.Coated Hooks As Per Drawing Supported On M.S.Angle 50X50x6 Mm At 2.5Mtr. C / C Including Fixing And Fastening With Wire, Painting M.S. Angles With One Coat Of Red Lead Primer And Two Coat Of Oil Paint Etc. Complete. No Item No.4 Providing And Fixing 100 Mm Dia.Chromium Plated Brass Showers Rose To 15Mm Dia. Supply Pipe Including Necessary Bend And Socket Complete. No Item No.5 Providing And Fixing Towel Rod With Clamps 16Mm Dia. Complete Sqft Item No.6 Providing And Fixing Hdpe Anti Bird Net / Pigeon Net For |Balcony, Window And Much More| With Attached Ropes And Cable Ties For Easy Installation ( White Color ) Including Necessary Accessories For Tying. Sqmt Item No.7 Providing And Fixing Jali Welded Mesh 50*25 13 Guage Including Necessary Accessories For Tying. Sqmt Item No.8 Providing And Applying Two Coats Of Exterior Acraylic Emulsion Paint Confirming To Corresponding I.S. Of Approved Manufacture And Of Approved Colour To The Plastered Surfaces Including Cleaning , Preparing The Plaster Surface, Applying Primer Coat , Scaffolding If Necessary, And Watering The Surface For Two Days Etc Complete. Sqmt Item No.9 Providing And Applying Two Coats Of Synthetic Enamel Paint Of Approved Colour To New / Old Structural Steel Work And Wood Work In Buildings , Including Scaffolding If Necessary, Cleaning And Preparing The Surface ( Excluding Primer Coat ) Etc. Complete. Sqmt Item No.10 Providing And Applying Plastic Emulsion Paint Of Approved Quality, Colour And Shade To Old And New Surfaces In Two Coats Including Scaffolding, Preparing The Surface. ( Excluding The Primer Coat ) Etc. Complete. Sqmt Item No.11 Providing And Fixing 22 B.W.G. Plain Frp Sheets On Top Of Weather Shed, Including Scaffolding, Fixing By Means Of Nut And Bolts Or As Directed Etc.Complete. ( Brackets Of 70X45 Mm To Be Paid Separately ) Rmt Item No.12 Providing And Fixing On Walls / Ceiling / Floor 15Mm Dia. Cpvc Pipe With Necessary Fittings, Remaking Good The Demolished Portion Etc. Complete .Including Removing Existing Pipe Line If Necessary And Conveying And Stacking The Same In Pwd Chowky Or As Directed Etc. Complete. Metric Tonne Item No.13 Providing And Fabricating Structural Steel Work In Rolled Sections Like Joists, Channels, Angles, Tees Etc. As Per Detailed Design And Drawings Or As Directed Including Cutting, Fabricating, Hoisting, Erecting, Fixing In Position Making Riveted / Bolted / Welded Connections Without Connecting Plates, Braces Etc. And Including One Coat Of Anticorrosive Paint And Over It Two Coats Of Oil Painting Of Approved Quality And Shade Etc. Complete. Sqmt Item No.14 Providing And Fixing Mild Steel Grill Work For Windows, Ventilators Etc. 20 Kilogram / One Square Metre As Per Drawing Including Fixtures, Necessary Welding And Painting With One Coats Of Anticorrosive Paint And Two Coats Of Oil Painting Complete. Sqmt Item No.15 Providing And Fixing Mosquito Proof Nylone Net With Velcro For Window And Ventilators Complete. Rmt Item No.16 Providing And Fixing Wall Protection Acrylic White Panels Of Size 200Mm In Width , 6Mm Thickness And In Required Length To Protect Your Walls In Heavy Traffic Areas , Made From High Quality Polyethylene ( Pe ) . Sqmt Item No.17 Supply And Installation Of Dpi Flux Translucent Roof With Standing Seam Multicell Polycarbonate Panel System. The System With Complete Assembly Of Co Extruded Uv Protected Multicell Panels Incorporated Into A Complete System. Co-Extruded Uv Protected Polycarbonate Panel System Of Min 12 Mm Thick Of 900Mm ( Min. ) Width With Angular Daylighting Concept. Panels Shall Have Minimum Six Layers In A Truss Bridge Design For Higher Flexibility & Strength. Panels With All Fixing Accessories To Ensure Best Performance For Wind Uplift, Vibration, Oil Canning And Visual Appearance. Panels Shall Be Manufactured With Vertical Standing Seam At Both Sides Of The Panel. Panels Shall Be Fixed On Purlin With Snap On Connectors With Double Tooth Grip Lock Locking Mechanism And Will Be Secured On Ms Structure ( Will Be Paid Separately ) With 3 Numbers Self-Drilling Screws & Trapezoid Ss Fasteners Holding The Base Of The Standing Seam Offering Best Stability Having A Pull-Out Load Of Min. 7000N ( 7Kn ) Tested As Per Iso 6892:1998 And Is 1608: 2005, As Per Design Requirement. Panels Must Satisfy Dart Drop Impact Test As Per Is 14443-97 Shall Show No Sign Of Breakage On Polycarbonate Sheets Which Have Been Exposed To Uv For A Min. Of 500 Hours As Per Astm G 155. Panels Shall Not Have Yellowness Index As Per Astm D 1925 Of 15 Units When Tested On A Sample Exposed To Uv For 500 Hours As Per Astmg155.U Value Shall Not Be More Than 1.6W / M2k As Per Eniso10077-2:2018. Panel Shall Be With Additional End Cap / Aluminiumu / F Profile / Glazing Bar For Ends As Required. Panel Shall Be Fixed Over Ms Structural Steel / Ms Purlin ( Paid Separately ) Conforming To The Detail Technical Specifications As Per Approved Architectural Drawings. Trained And Factory Authorized Labour With Supervision To Complete The Entire Panel Installation As Per Drawing & Direction Of The Engineering Incharge. Colour: As Per Approval.Approved Make : Flux By Dpi Daylighting Or Approved Equivalent The 12 Mm Thick Panels Shall Be Used For A Roofing Height Of Upto 15 Mtrs. Section B- Electrical Work Each Item No.18 Supplying, Installing, Testing & Commissioning Split Type Variable Speed Inverter Technology With Minimum 3 To 1 Convertible Mode For Compressor, Room Air Conditioning Unit 1.3Tr To 1.6Tr Capacity Having Iseer Minimum 5.00 Suitable To Operate On 250V, 50 Hz, A.C. Supply Having 1 No Of Air Handling Unit Hi-Wall / Floor Mounting Type Complete With Refrigerant R32 Having Copper Condenser, Minimum 2.5Pm Filter, Self Diagnosis Feature, Stabilizer Free Operation & Temperature Display On Indoor Unit, Noise Level Maximum 50Dba At Position As Per Specification No. Apac / Wac Each Item No.19 Supplying And Erecting Fresh Air Cum Exhaust Fan Of Light Duty 250 V A.C. 50 Cycles 300Mm. 1400 Rpm Rust Proof Body & Blades, Wire Mesh, Duly Erected In An Approved Manner. Each Item No.20 Supplying And Erecting Isi Mark Midget Type 3.0 Ltr Instant Type Water Heater Of Abs Plastic Body 3 Kw, Heating Element 230 / 250 Volts 50 Cycle Ac Supply With Inlet And Outlet, Thermostatic Control And Thermal Cutoff With 3 Core Pvc Flexible Wire Leads Complete Duly Tested And Marking Sr. No. And Date Of Erection Each Item No.21 Providing And Erecting Bracket Fan 400 Mm. Sweep A. C. 230 Volts 50 Cycles 1350 R.P.M. Oscillating Type, Plastic Or Metal Blades Chrome Plated Guard With Regulator And Moisture Proof Treatment To Winding And With ‘E’ Class Insulation. Each Item No.22 Supplying And Erecting Abc Powder Type Fire Extinguisher As Per Is : 13849 / 15683 Of 6 Kg Capacity With Necessary Clamp For Erection On Wall. Each Item No.23 Supplying And Erecting Regular / Standard Model Ceiling Fan Of 900 / 1050 Mm. Sweep Complete Erected In Position As Per Specification No. Fg-Fn / Cf Each Item No.24 Supplying, Installing, Testing And Commissioning Optical Type Smoke Detector Complete On Box As Per Specification No. Fffas / Sd Each Item No.25 Supplying And Erecting Led Square / Circular Max. 18 W Down Lighter / Panel Light Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 2000 Lumens, Min. Efficacy Of 110 Lumen / W, Cri>80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd<10%, P.F. >0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50, 000 Hrs. At L70b50, Including Driver, Having Mounting Arrangement With Board For Surface Type Or Spring Loaded Mounting Clips Complete With 3 Years Warranty. Section C- Furniture Work Sqft Item No.26 Providing And Fixing Aluminium Fix Partition And Sliding Door In With Half Backlight Sheet And Half Aluminium Net Opening With Hardware Fitting Required In Existing Kitchen Sqft Item No.27 Providing And Fixing Wooden Ply And Laminate Shelf With Fitted On 3 Nos L Bracket Support On Wall ( Size 6 X 16 ) In Existing Kitchen. No Item No.28 Providing And Fixing 2 L Brackets Fixed On Wall ( Size 2 X 16 ) For Micro Oven In Existing Kitchen. No Item No.29 Providing And Fixing Toughened Slliding Glass Door With White Backprinted Film, One Lock , Two Hinges, Pvc Seal At Edges , Ss Finished Handles From Both Sides Etc.Complete Size ( 0.6 M X 2.1 M ) No Item No.30 Providing And Fixing Cloth Hanger Fitting Fixing With Screw Behind Bathroom Door Item No.31 Providing And Fixing Rolling Blinders For Sliding Window Item No.32 Providing And Fixing Wall Glass Shelf 18 X 6 In Bathroom Item No.33 In Basement Storage Rack In Slotted Angle With White Powder Coated With Min 3 To 4 Shelf And Height 6 X 2 X 4 Providing And Fixing. Item No.34 Storage:-Finished In 18Mm Thk. Prelaminated Ply Of Approved Finish With 18Mm Edge Pvc Band. All Iner Surface Should Be Finished In Laminate Of White Colour Shade. All Rates Shall Be Inclusive Of All Necessary Hardware Items And Fittings Of Ebco Or Equivalent Make.
