Mazagon Dock Limited has published Tender For Server Room And Ups Room Renovation At Primary And Near Dr Site In Submarine Division, Mdl, Mumbai. Submission Date for this Tender is 18-07-2023. Barriers Tenders in Mumbai Maharashtra. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 06-Jul-2023 | Corrigendum-I | Financial Bid | 11-07-2023 |
2 | 11-Jul-2023 | Corrigendum-2 | Date | 18-07-2023 |
Sl. No. | Item Description |
1 | Biometric Access Control (Finger) |
2 | Fire Suppression System (NOVEC 1230) |
3 | Spares (Fire Suppression System) |
4 | VESDA System |
5 | Fire Retardant Partition |
6 | Fire Alarm System (Addressable) |
7 | Environmental Monitoring System |
8 | 3 Ton PAC (Precision Air Conditioner) |
9 | Comprehensive Warranty of 2 Years |
10 | Supplyinganderectingminifeeder pillar triple pole with200A FPMCCB as incomer and2 outgoing circuits with HRC fuse base and cartridge of 100Aconsists ofaluminium bus bar500 V200 Acomplete erected in 14 gauge CRCA sheet box with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation as per specification no. SW-SWR/MFP |
11 | Supplying, erecting & terminating XLPE armoured cable 3½ core120sq. mm. aluminiumconductor withcontinuous12.97 sq. mm. (8 SWG) G.I. earth wire completeerected with glands |
12 | Supplyinganderectingtriplepoleand neutral distribution board (TPNDB) surface/ flushmounted SP / TP of 24 poles/8 ways on iron / GI frame(vertical busbar type)as per specification no. SW-SWR/MCBDB |
13 | Providing & erecting 3 Pole MCCB upto 100A, 415V,with short circuitrating 25 kA (Ics=100% of Icu ),adjustablethermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frameas per specification no. SW-SWR/MCCB |
14 | Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB |
15 | Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB |
16 | Supplying, erecting & terminating XLPE armoured cable 3½core70sq. mm. aluminium conductor withcontinuous8.35 sq. mm. (10 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL |
17 | Supplying, erecting& terminating XLPE armoured cable 4 core 16 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
18 | Supplying, erecting& terminatingXLPE armoured cable 4 core6 sq. mm. copperconductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU |
19 | Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 30A, 3 pin plug & earth socket and 30 A 3 pin plug top with 30A triple pole MCB complete erected on angle iron/ GI frame. |
20 | Supplyingand erecting single pole and neutral distributionboard (SPNDB) with door surface/flush mountedwith 2 polesfor incoming and 10 poles for outgoing SP MCB’son iron/ GI frameas per specification no. SW- SWR/MCBDB |
21 | Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
22 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
23 | Point wiringfor independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FR grade copper wire with flush type switch and requiredaccessories as per specification No: WG-PW/SW |
24 | Secondary point wiring for additionallight/ bell point inPoint PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR/ FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW |
25 | Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 modules complete duly connected. |
26 | Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
27 | Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
28 | Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete. |
29 | Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
30 | Supplying and erecting triple pole metal clad switch and fuse 415V, 100A on angle iron / GI frame as per specification no. SW-SWR/MTP. |
31 | Supplying, erecting & terminatingXLPE armoured cable 3½core50 sq. mm. aluminium conductor withcontinuous5.48 sq. mm. (12 SWG) G.I. earth wire completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL |
32 | Supplyingand erecting single pole and neutral distributionboard (SPNDB) with door surface/flush mountedwith 2 polesfor incoming and 10 poles for outgoing SP MCB’son iron/ GI frameas per specification no. SW-SWR/MCBDB |
33 | Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) inprovideddistribution board as per specification no. SW-SWR/MCB |
34 | Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB |
35 | Providing & erecting Hot dipped galvanized cover suitablefor perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner. |
36 | Supplying and erecting FR grade, pvc armoured multimodeoptical fibre cablewith 6 fibres, with core dia 50/125 µm (OM3) suitable for 1 gbps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC LSZH |
37 | Supplying & laying HMS PVC conduit 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail