|
| 1 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24 |
| 2 | Dry rubble masonry using new stone including simultaneous pointing of the export surface and all incidental charge such as bailing out water etc complete, Scaffolding curing fishing complete with standard specification. |
| 3 | Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28 |
| 4 | Random rubble masonry in cement mortar 1:5 mix (one part of cement and five part of sand) using new best rough and bond stones from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc complete complying with standard specifications. |
| 5 | Brickworkin cementmortar1:5 (one part of cement five part of sand) using country bricks of size 8¾\"x4¼\"x2¾\" includingcuring, cost and conveyance of all materials to siteand all labour charges etccompleteas per standard specification. |
| 6 | Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29 m height for plain surfaces such as RCC slabs rectangular beams Tee or L beams lintels, stair case beam etc. in all floors with all cross bracing using mild steel sheets of size 90x60 cm and BG10 gauge stiffended with welded mild steel angles of size 25x25x3 mm for boarding laid over silver oak country wood joists of size 10x6.5 cm spaced at about 90 cm center to center and supported with casurina props of 10 cm to 13 cm Ø spaced at 75cm center to center etc. complete complying with standard specification in all floors. TNDSS No:30&36 |
| 7 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97 |
| 8 | Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30 |
| 9 | Ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshade canopies, stair case steps, landing slab, etc. with cement mortar 1:3 (one part of cement three part of sand) 10 mm thick including packing the surface and provided necessary cement mortar nosing, headings as per the size specification wherever necessary using the same mix as directed by the departmental officers etc. complete complying with standard specification. |
| 10 | Plastering walls with cement mortar 1:4 (one part of cement four part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61 |
| 11 | Supply and fixing in position best quality of approved make Indian Water closetof size 580 x 440 mm with all accessories such as \"P\" trap or \"S\" trap confirming to IS 2556 part XII with sand cusion and forming flooring alround the closet using 40 mm leveling course 1:4:8 - 100 mm thick and finishing the top to the required slope and including necessary internal connection and outlet connection and making the disturbed potion to original condition without leakage etc., including Labour charges for fixing etc complete. |
| 12 | Supply and fixing of cut stone including cost conveyance of all materials to site and all other labour charges etc., complete as per standard specification. |
| 13 | Painting the new walls two coats over one coat of priming with best cement paint of approved colour Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification. |
| 14 | Dadooing the walls with plain glazed tiles of 150 x 150 x 6 mm set in cement mortar 1:2 (one part of cement two part of sand) 12 mm and pointing white cement used 4kg/m2 neatly etc complete as directed. |
| 15 | Paving floor with colour ceramic tiles of size 200 x 200 x 6 mm in all floors over the base layer of cement mortar 1:3 (one part of cement three part of sand) 20 mm thick pointed with white cement at 0.40 kg/m2 including finishing the joints etc complete, as directed by the departmental officers (The rate should be exclusive of cost of flooring concrete 1:5) special |
| 16 | Solid PVC door shutters using 19 gauge 19 mm MS square tubes for styles and outer frames. 15 mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5 mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. |
| 17 | Supply and delivery of fixing of HDPE tank 2000 litres capacity as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of GI pipes and specials for pipe connection works including cutting, threading and fixing chargers as directed by officers. |
| 18 | Supplying and delivery of following PVC / GI pipes and specials |
| 19 | 32 mm PVC 6KSC pipe |
| 20 | 32 mm PVC elbow |
| 21 | 25 mm PVC pipe |
| 22 | 25 mm PVC elbow |
| 23 | Plastering walls with cement mortar 1:3 (one part of cement three part of sand) 20 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. |
| 24 | Casting and fixing Jali of RCC 1:1½:3 (One part of cement one and half part of sand and three part of aggregates) including all materials, labour charges, form work curing charges etc complete. |
| 25 | Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. |
| 26 | Supplying and fixingof trusses using necessary \"L\" angles and \"I\" sections each according design approved by the departmental officers including cutting, welding, cost and conveyance of all materials to work site and all labour charges etc as per standard specifications. |
| 27 | Supplying and fixing of roofing with galvaline Sheet 0.60 mm thick of approved quality by drilling hole (and not by punching) with necessary J/U bold and nut of 8 mm Ø of suitable length providing one set of bitumen washer at 25 mm Ø and 1.60 mm thick for each bold and nut including protruding portion of bold and nut shall be covered with bitumen compound etc complete complying with standard specification and as directed by Engineer incharge. TNBP NO.49. |
