|
| 1 | Item No.1 :- Excavation in soft strata including including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankmen tincluding cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. Complete as directed with all leads and lifts. |
| 2 | Item No.2 :- Excavation in hard rock of all toughness by breaker including boulders above 0.6 m dia. (0.113Cum) minimising damage to side slopes of excavation and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labour, levelling bed etc., complete with lead upto 1 km andall lifts |
| 3 | Item No.3 :- Dewatering by pumping out water collected with Diesel or Electrical pumps including cost of all materials, machinery, labour, providing sump and all other ancillary operations whenever necessary etc. complete under specific and indispensable circumstances with prior approval from competent authority with authentic evidence of records justifying dewatering etc. complete as directed |
| 4 | Item No.4 :- Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 5 | Item No.5 :- Providing hearting embankment using selected impervious soil from approved borrow areas (Government acquired land ) in layers including cost of all materials, machinery,labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc., complete with including all leads andlifts. |
| 6 | Item No.6 :- Providing casing embankment casing embankment using selected pervious material from borrow areas (Government acquired land ) in layers including cost of all materials, machinery, labour, all other operations such as collection of material, spreading material in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc., complete with all leads andlifts. |
| 7 | Item No.7 :- Providing casing embankment casing embankment using selected pervious material available directly from excavation and borrow area in layers including cost of all materials, machinery, labour, all other operations such as collection of material, spreading material in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc., complete with all leads andlifts. |
| 8 | Item No.8 :- Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. Complete |
| 9 | Item No.9 :- Providing and Laying of Quarry Spalls of approved trap stone quality of specified thickness including hand packing etc. complete as per specifications & approved drawing as directed with all leads andlifts. |
| 10 | Item No.10 :- (From Utilisation) Providing and Laying of Quarry Spalls of approved trap stone quality of specified thickness including hand packing etc. complete as per specifications & approved drawing as directed with all leads andlifts. |
| 11 | Item No.11 :- Providing and constructing dry rubble rock-toe with filter below and behind the rock toe using sand graded gravel ,quarry spaul ,rubble and stone chips from approved source including cost of all materials,machinery, labour, hand packing rubble and stone chips, finishing top and sides to required slopes etc.complete with lead upto 1 km and all lifts as directed. |
| 12 | Item No.12 :- Providing and constructing 450 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc. complete lead upto50m and all lifts. |
| 13 | Item No.13 :- (From Utilisation) Providing and constructing 450 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc. complete lead upto50m and all lifts. |
| 14 | Item No.14 :- Providing and casting insitu or precast tapering R.C.C.M-20 Mountable type Kerb without gutter (as per IRC86 1983) embedded 125 mm below ground leve lover M-10 PCC finished neatly with C.M.1:2, setting the samein C.M.1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In- charge.Using Concrete Batching and Mixing Plant |
| 15 | Item No.15 :- Providing and Fixing RCC boundry / guard / chainage blocks of size 75 X 20 X 20 cm incl excavation and fixing in M15 45X 45 X 45 cm CC block with oil painting of two coats , lettering etc complete |
| 16 | Item No.16 :- Dismentalling the stone masonary in CM incl stacking the material with in 15 m lead and all lifts etc complete as directed |
| 17 | Item No.17 :- Dismentalling the RCC work CM incl stacking the material with in 15 m lead and all lifts etc complete as directed |
| 18 | Item No.18 :- Providing and guniting external 25 mm thick cement mortar coating in CM 1 : 3 (cement consumption 15.94 kg/sqm) pnumatically under pressure of 2.1 to 2.8 kg /Sq cm, with weld mesh 50 x 50 x 2.54 mm (13 gauge), after duly cleaning the surface by wire brushing, degreasing etc. including necessary admixtures (200 ml / bag of cement), curing, rehandling the pipe from fabrication shop to guniting place and from guniting place to laying location etc. complete with all leads & lifts. |
| 19 | Item No.19 :- Providing and fixing 25 mm Diameter Steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75m depth & placing the dowel in position, effective grouting the hole with CM 1:1 prop. including cost of all materials, machinery, labour, cleaning holes etc., complete. |
| 20 | Item No.20 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 21 | Item No.21 :- Providing and laying in situ cement concrete of grade M 15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/ RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Batching Plant and Transit mixer with centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts etc. complete as directed. (b) M-15 (40 MSA) (Cement 5.20 bags/Cum) |
| 22 | Item No.22 :- Providing and laying in situ cement concrete of grade M- 20 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Batching Plant and Transit mixer including centering, shuttering ,scaffolding compacting, curing etc. complete with all lifts etc. complete as directed. (A) M-20 (20 MSA) (Cement 6.60 bags/Cum) |
| 23 | Item No.23 :- Providing and laying in situ cement concrete of grade M 25 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Batching Plant and Transit mixer including centering, shuttering, scaffolding, placing, compacting, curing etc. complete with all lifts etc. complete as directed. (a) M-25 (20 MSA) (Cement 7.62 bags/Cum) |
| 24 | Item No.24 :- Providing and fixing in postioin TMT - FE - 500 bar reniforcement of various diameters for R.C.C. pile caps, footings, foundaitons, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cuitng, bending, hooking the bars, binding wiht wires or tack welding and supporitng as required complete as direceted. |
| 25 | Item No.25 :- Providing and constructnig contractoin jonits by fixing 310 mm wide central bulb type approved quality PVC water stop in two lines with 8 mm dia. Steel dowel rods on either side at 1 m interval, forming 125*125 size groove in between 2 water stops for filling asphalt, fixing 15 mm dia. two legged G.I. pipe wiht U-bend at bottom for circulaitng steam at inetrval and forming 150 mm dia. formed drain behind water seals including cost of all maetrials, machinery, labour, filling asphalt in groove, circulaiton of steam at ine rvals,vulcanizing water seal joints ect complete wiht all lifts as direceted. |
| 26 | Item No.26 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 27 | Item No.27 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 28 | Item No.28 :- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 29 | Item No.29 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 30 | Item No.30 :- Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 31 | Item No.31 :- Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 32 | Item No.32 :- Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing,moulding edges, polishing and cleaning etc. complete. |
| 33 | Item No.33 :- Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 34 | Item No.34 :- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. Complete |
| 35 | Item No.35 :- Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer. |
| 36 | Item No.36 :- Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) |
| 37 | Item No.37 :- Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC \"C\" channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the \" c \" channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated |
| 38 | Item No.38 :- Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, oil painting two coats complete. |
| 39 | Item No.39 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 40 | Item No.40 :- Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete. |
| 41 | Item No.41 :- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) |
| 42 | Item No.42 :- Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. etc. complete. |
| 43 | Item No.43 :- Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 44 | Item No.44 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 45 | Item No.45 :- Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete.. |
| 46 | Item No.46 :- Providing and fixing wall-hung white wash basin of size 470x575x190mm of approved make half pedestal, pillar cock, C.P.Angular stop cock, long thread continental including S.S. bottle trap of having necessary pipe connections up to the outside face of the wall.etc complete. |
| 47 | Item No.47 :- Providing and fixing informatory sign boards in rectangular shape of size 1.20m x 0.90m made out of 16 guage Aluminum panel bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (HIP) having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour background including M. S. angle iron frame of size 35 mm X 35 mm X 3 mm & two M.S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.65 m long, duly painted with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M-20 concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Aluminum Panel Type IV High Intensity. |
| 48 | Item No.48 :- VERTICAL LIFT BARRAGE GATE LEAF / STOP LOG GATE LEAF - Manufacturing, Erection, Transportation, Commissioning & Testing Manufacturing with QAP, fabrication, erection, commissioning & testing of Gate leaf of V.L. Barrage gate Consisting of following parts. Gate Leaf, Horizontal girder, Guide roller assembly, & Roller Assembly. All material used shall conformed to related IS Codes. Mild steel confirming to IS 2062.The tolerances between Components & assembly Shall confirm to IS 4623.the fits and tolerances between the bronze bushing & hub shall be H7r6 (Interference fit) & with pin shall be H7f7 (Clearance fit) and for antifriction bearings with hub shall be H7 (Interference) & antifriction bearing with pin shall be r6 (Interference) as per IS 4623. Other Material includes C.S. (IS1030), Brass (IS 28), P. Bronze (IS 305), Al. Bronze (IS 318), S.S. (IS 6911), Rubber seal (IS 11855), Welding electrodes (AWS E6013 for general weld joints & E7018 for X ray quality weld joints). It includes all materials, Labour charges, machining and machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177,The embedment & gate assembly shall be reasonably water tight, the maximum permissible leakage being not more than 5 liters/min/m length of seal. |
| 49 | Item No.49 :- VERTICAL LIFT BARRAGE GATE EMBEDMENT / STOP LOG GATE EMBEDMENT - Manufacturing, Erection, Transportation, Commissioning & Testing Manufacturing with QAP, fabrication, erection, commissioning & testing of embedded parts of V.L. Barrage gate/Stop log gate Consisting of Primary Embedments, Sill beam, Roller Track, Side guide, Side seal kit etc. All material used shall conformed to related IS Codes. Mild steel confirming to IS 2062.The tolerances between Bushing / Bearing /Pin Should confirm to IS 919 (Part I & II). Other Material includes C.S. (IS1030), Brass (IS 28), P. Bronze (IS 305), Al. Bronze (IS 318), S.S. (IS 6911), Rubber seal (IS 11855), Welding electrodes (AWS E6013 for general weld joints & E7018 for X ray quality weld joints). It includes all materials, Labour charges, machining and machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177.The embedment & gate assembly shall be reasonably water tight, the maximum permissible leakage being not more than 5 liters/min/m wetted length of seal. The surface finish of seal plates should be within the range of 1.6 to 6.3 µm (IS 9349). |
| 50 | Item No.50 :- WALKWAY BRIDGE - Manufacturing, Erection, Transportation, Commissioning & Testing Manufacturing with QAP, fabrication, erection, commissioning & testing of Walkway/Hoist Bridge. All materials used shall confirmed to related IS Codes. Mild steel used for manufacturing shall conform to IS 2062. Welding electrodes (AWS E6013 for general weld joints & E7018 for X ray quality weld joints). It includes all materials, Labour charges, machining and machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177. |
| 51 | Item No.51 :- 8T CAPACITY ROPE DRUM HOIST- Manufacturing, Erection, Transportation, Commissioning & Testing Manufacturing with QAP, fabrication, erection, commissioning & testing with 125 % of rated capacity of 8T Rope Drum Hoist consisting of central drive unit, gear train frames, rope drums, gears, pinions, shafts, 3 phase electric motor, brake, reduction gear box, wire ropes, gate position indicators, manual operation arrangement, ICTP main switch, electric starter, etc. All material used shall conformed to related IS Codes specified in IS 6938. Above item covers Mild steel confirming to IS 2062. the fits and tolerances between the bronze bushing & hub shall be H7r6 (Interference fit )& with pin shall be H7f7 (Clearance fit) and for antifriction bearings with hub shall be H7 (Interference) & antifriction bearing with pin shall be r6 (Interference ) as per IS 4623. Other Material includes C.I (IS 210), C.S (IS1030), P. Bronze (IS 305), Al. Bronze (IS 318), S.S (IS 6911), Wire rope (IS 2266), Wire rope sockets ( Is 2485), 3p S4 duty Induction Motor (IS 325), Reduction gear box ( IS 7443), Welding electrodes (AWS E6013 for general weld joints & E7018 for X ray quality weld joints). It includes all materials, Labour charges, machining and machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total sloventless coal tar epoxy paint applied to give dry film thickness 70 +/- 5 microns and 2 coats of minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177 |
