Himachal Pradesh State Electricity Board-HPSEB has published Tender For Providing Sop To The Newely Constructed Block Devlopment Office Building At Banjar In ( E) Section Banjar Under Esd Banjar. Ts 227/2022-23. Submission Date for this Tender is 30-06-2023. Building Work Tenders in Mandi Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Jun-2023 | corrigendum | Date | 30-06-2023 |
| Sl. No. | Item Description |
| 1 | Supply part HT Line |
| 2 | Supply of 9.00 Mtr. LongISI marked swaged steel tubular pole as per IS: 2713/1980(Part-"A") as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation410SP-47 |
| 3 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any. |
| 4 | Supply ofHT AB Cable (3X95+70 MM2)X2 Cables. |
| 5 | Supply ofanchoring assemble for HT |
| 6 | Supply of Suspenstion assemble for HT |
| 7 | Supply ofFacede hooks for HT |
| 8 | Supply ofheat shrinkable straight through jointing kit |
| 9 | Supply of cable termination kit |
| 10 | Supply of GO switch handle supportingCI X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length (750mm)Fabrication and supply of Cross arms suitable for11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable placeswherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality: |
| 11 | Supply of MS Channel 100x50x6 mmLength (2800 mm x2 No.) Cross Arm:Fabrication and supply of Cross arms suitable for11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 100x50x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable placeswherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality: |
| 12 | Supply of CI X-Arm (Horizontal) - MS Channel Iron: 75X40x6, Length (2800 mm x2 No.) for supporting GO switch and DO Fuse.Fabrication and supply of Cross arms suitable for11 KV made of only TATA/SAIL/RASHTRIYA ISPAT M.S. Channel Iron 75x40x6 mm Cross Arm, suitable for fixing on both Steel and PCC Poles whatever is required single/double pole structure of 11KV line with holes at suitable placeswherever required to adjust 5/8” dia nuts and bolts, pin insulators, ball cleaves, eye socket and washers. The weight of MS channel should be strictly 9.56 Kg per meter with a variation of +/-5%. The Cross Arm should be duly painted with two coat red oxide paint of superior quality: |
| 13 | Supply of 11 kV Pin Insulator BrownGlazed Porcelain insulator alongwith GI Pin confirming to IS-731/1971 or latest version thereof with minimum and maximum creepage distance distance & duly fitted with lead/zinc thimble suitable for use with GI forged pin having small steel head as per IS:2486 (Part-I & II) of 1993 & latest amendment if any. Moderately polluted atmospheres Creepage distance- 320mm |
| 14 | Supply of Stay Set Suitable for 11KV made of M.S. Round 1800mm in length, 18mm dia having threads up to 300mm on one end with one nut and one check nut to avoid slippage and eye of 40mm dia on other side and welded confirming to REC specification. Elbow made of MS channel iron 75x40x6mm, 250mm long and M.S. Round 18mm dia, vertical height 450mm, both ends bend after putting in two holes in channel iron taking the ends out 25mm minimum in length and welded with channel iron. One anchor of Angle Iron 65x65x6mm, 750mm in length with one hole of 20mm dia in the centre. The complete stay set shall be painted with superior quality black Japan paint. |
| 15 | Supply of Galvanized Stay Strand conforming to ISS-2141/1992 Edition 2002-05 (with upto date amendments) with heavy coating Zinc hot Dip Galvanized as per ISS-4826/1979 (2001-06) (latest)of following grade and size:-Grade -4 Size7/3.15mm (7/10SWG) |
| 16 | Supply of Danger Plate Size: 250x200x1.6 mm made of mild steel plates 1.6 (minimum) thick vitreous enameled white letter figure, conventional skill and X-Boxes and signal red colour on front side for use in HPSEBL. The rear side of the plate shall be black enameled and conforming to IS specifiction no. IS-1351/1982 suitable for 11KV |
| 17 | Prov. Nuts & Bolts @25 KG Per Km. |
| 18 | Supply of Half Clamp (MS Flat 50x6mm) |
| 19 | Supply of Full Clamp (MS Flat 50x6mm) |
| 20 | Supply of Aluminium Paint for all poles and steel fitting |
| 21 | GO Switch 11kv,400 amp, 25ka, triple pole o/d type |
| 22 | DO Fuse unit |
| 23 | Supply Part DTR 100 kva |
| 24 | Supply, Testing etc. including Design, engineering, manufacture, assembly, inspection, testing and delivery of ISI marked, non-sealed, oil immersed, ONAN type, 50 Hz. double wound, 3-phase- 11/0.433KV, 100KVA, outdoor type distribution transformers, for use in power distribution system. (Approved vendor of HPSEBL) |
| 25 | Supply of 9.00 Mtr. LongISI marked swaged steel tubular pole as per IS: 2713/1980(Part-"A") as amended from time to time, along with Cap Welded on top & Cast iron Base plate of designation410SP-47 |
| 26 | Supply of RCC pipe (Muff) ISI marked suitable for different sizes of steel poles. 2000 mm in length and 25 mm thick with 250 mm internal dia duly fabricated by using un-galvanized MS wires of 12 SWG rings and 6 mm MS round in vertical direction conforming to ISI 458-1988 or latest version if any. |
| 27 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos for incomer line |
| 28 | MS angle Iron (50X50x6 mm), Length : 2800 mm x 1 Nos for LA |
| 29 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 30 | Transformer bed, belting & Knee Bracing |
| 31 | X-Arm Channel Iron (100x50x6mm),Length :2800mmx2Nos Transformer Bed |
| 32 | X-Arm Channel Iron (100x50x6mm),Length :460mmx2Nos supporting main channel Transformer |
| 33 | MS angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 34 | MS angle Iron (35X35x5 mm), Length : (460 mm) x 2 Nos |
| 35 | MS angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Nee Bracing |
| 36 | Transformer LT Distribution Box and GO Switch fixing Assembly |
| 37 | MS angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 38 | MS angle Iron (50X50x6 mm), Length : (450 mm) x 2 Nos |
| 39 | GO switch handle Supporting : (Channel iron (75x40x6 mm) , Length: 460mm. |
| 40 | GO switch unit (11kv, 400A, 25KA) Tripple pole O/D type. |
| 41 | D.O Fuse Unit |
| 42 | Surge Arrester, 9 kV Station Class(Porcelain Type) |
| 43 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
| 44 | Stay set complete |
| 45 | Stay Wire (7/3.15 mm) (7kg Per Stay Set) |
| 46 | Pipe Earthing Set |
| 47 | LT Distribution Panel Box with MCCB 160 amp 3P 35kA,ICS=100% ICU, KIT-KAT 200Amp.Supply of LT Distribution Panel Box suitable for 63KVA S/Stn of size 900x800x200mm +/- 5% made of steel sheet of 1.63 mm thickness having doubledoor locking arrangement duly powder coated painted complete with MCCB Rating 160Amp, 3 Poles having following specifications (1) Minimum frame size 100Amp (2) Type variable trip free, (3) Breaking capacity- Isu & LCS at 415, 50 Hz (KA: not less than 50 KA) (4) , Thermal release range: 320-440Amp (5) Mecanicallife (operation) 20000 No. (6) Electrical life (operation) 4000 No. (7) Rated insulation voltage (V) 690V (8) Tripping thermal releasing setting : Thermal-O/L variable setting (9) Tripping magnetic releasing setting : Magnetic- S/C fixed setting (12) in (10) (Operation) volatge 415V, AC (11) Caliberation temperature: 40 degree C(12) High voltage withstand voltage : 3KV for 1 minute (13) Confirming to IS : 1993/60947-2, 1989 (14) Make L&T/ Havells/ABB/ HPL/ Schiender (15) ICS : 100% ICUReangular type aluminum alloy bus bar of 160 Amp. having length 800 mm of Phase 800 mm long for netural outgoing feeder 3 nos. outgoing feeders shall be made in the Pannel U type Single pole MCCBs of 160 Amp. shall be provided in all3- phases.The panel shall be fully wired with insulated copper wire have adequate clearance . As per standard specification |
| 48 | Half Clamp (M.S. Flat 50x5 mm) |
| 49 | Full Clamp (M.S. Flat 50x5 mm) |
| 50 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm F or more(with flat and spring washers)] |
| 51 | Aluminium Thimble |
| 52 | Aluminium Thimble |
| 53 | Barbed wire |
| 54 | Danger Plate |
| 55 | Aluminium Paint. |
| 56 | LT Cable (3.5 core ) 120 mm2 |
| 57 | Erection of HT LINE |
| 58 | Erection of steel tubular pole9 Mtr. Long(Single pole str) digging of pit, Drilling of holes in X-arm, Erection of pole, Fixing of insulator X-arm, Fixing of barbed wire danger plate ,Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial sizewith curing complete etc.), Filling of pit+ramming, painting of pole and all steel items Erection of GO switch on tapping/Line structure(Punching of the poles is stricitly not allowed) |
| 59 | Erection of conductorHT AB Cable (3X95+70 MM2)X2 Cables on Steel Tubular Poles 9 Mtr Long (Single pole str.) |
| 60 | Erection of Stay Set HT (Digging of pit, fixing of stay rod, filling of pit , nozzeling & tighting) |
| 61 | Erection of Earthing set (Digging of pit, fixing of GI wire to the earth system & filling of pit) |
| 62 | Erection Part:- |
| 63 | Erection of 100 KVA , 11/0.433KV DTR,complete viz digging of pit for poles & earthing (2 No. for pole & 3 no. for earthing), Drilling of holes in X arms & poles Prepration of plateformstructure member CI, AI i.e. X-arm & Knee bracing set, Erection ofDouble Pole Structure,Concreting of RCC Muff with c:c 1:3:6 (1 cement :3 sand :6 aggregate 20 mm nomial sizewith curing complete etc.), Erection of plateform, Erection of x-arms, Erection of G.O. Switch, Erection ofDrop-Out Fuse Unit, Erection of Lightning arrestor, Erection of LT Box, ProvidingEarthing connection including G.I.Wire to G.O Switch, Transformer, Lightning arrestor,etc , Erection of 4 Nos. Stay set , Erection of Jumper, Pipe Earthing 3 No. sets , Layingof LT Cable, Barbed wire & painting complete in all respect. |
| 64 | Add Road transportation by truckof 100 KvaS/stn. And HT line and GO Switch and its associate material from road head to site of erection. Including loading and unloading. |
| 65 | Manual Carriage from road to site of workof 100 Kvaand its associate materia an avg. lead of =0.200 KM |
| 66 | MANUAL CARRIAGE OF MATERIAL FORHT LINE CONSIDERING AVERAGE DISTANCE FROM ROAD HEAD TO SITE OF WORK AVERAGE LEAD=0.200 KM |
| 67 | HT Steel Poles 9 mtr. Longand RCC Muff |
| 68 | Manual carriage of associate material (accept ST poles) like wise cross arm, bracing set, insulators, stay set, stay wire, Conductor & GI wire and GO switch matirial and Drop-Out Fuse Unit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
