|
| 1 | Earth work excavation in all soils and sub soils to full depth as may be directedby the departmental officers exceptin hard rock requiring blasting but inclusive of shoring, strutting and balling out water wherever nessasaryand depositingthe earth within initial leadof 10 metre and initial lift of 2 metreetc., completeas per Standard specifications SS |
| 2 | Plain cement concrete 1:4:8 ( One cement four sand and eight broken granite metal ) using 40 mm ISS size HBG metal including cost and conveyance of all materials to working site, laying concrete, compacting,curing, dewatering if necessary and finishing neatly etc. complete complying with standard specification. |
| 3 | Supplying and filling with well gravel layers of not more than 15cm thick well rammed watered and compacted including cost and conveyance of sandand fillingcharges etc complete as per standard specification |
| 4 | Supplying and filling with clean river sand in layers of not more than 15cm thick well rammed watered and compacted including cost and conveyance of sand and filling charges etc complete as per standard specification |
| 5 | Brick workin cementmortar1:5 (one cement and five sand)using second class chamberbricks of standerd size22cm x 11 cm x 7 cmincluding cost and conveyance of all materials to siteand labour charges etccompleteas perStandard specification. |
| 6 | Reinforced cement concrete 1:1½:3 ( One cement one and half sand and three broken granite metal ) using 20 mm ISS size HBG metal excluding cost of reinforcement steel and shuttering for centering but including cost and conveyance of all other materials to working site, laying concrete, compacting, curing, dewatering if necessary and finishing neatly etc. complete complying with standard specification. |
| 7 | Supplying fabricating and placing in position of mild steel or ribbed tar steel for reinforced cement concrete works including cost of steel binding wire all labour charges for cutting fabrication and placing of rods and other incidental charges etc., complete as per standard specification. |
| 8 | Supplying and Erecting Steel Centering for sides andsoffits including supports and strutting upto3.29 m height for planesurfaces such as RCC Slabs,Lintels, Bed blocks,canopyetc., with all cross brasingsusing mild steelsheets of size 90cmx60cm and 10 gauge stiffenedwithwelded MS anglesof size 25mmx25mmx3mm for boardinglaid over silver oak (CW) joists of size 10cmx6.5 cm spaced at about90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/cetc., complete complying with SS and as Directed. |
| 9 | Column |
| 10 | Beam and Slab |
| 11 | Weathering course concrete broken brick jelly20mm size in pure slacked lime over RCC roofslab in proportion 32:12.5 for required depth of thegiving required slope and thickness of roof well beatersby the wooden beaters etc., complete as per standard specification. |
| 12 | Roof finishing terrace flooring with course of pressed tiles of size 20cmx20cmx2cm using cement mortar 1:3 mixed with crude oil of 10% by weight cement and pointed with same oiled mortar etc., complete as per standard specification. |
| 13 | Flooring finishing with vertified tiles of size 60cmx60cmx6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.40kg/1m2 including finishing, jointing and painting flush with tiles surface etc., complete. |
| 14 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 15 | Dadooing walls with colour designed Glazed tiles of sizes 300mm X200mm X 6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 16 | Plastering with cement mortar 1: 5 mix (One cement and fivesand)12 mm thickincluding cost and conveyance of all materials, finishing, curing, and all labour charges etc. complete as per Standard specification. |
| 17 | Plastering with cement mortar 1: 3 mix (One cement and threesand)10 mm thickincluding cost and conveyance of all materials, finishing, curing, and all labour charges etc. complete as per Standard specification. |
| 18 | Plastering with cement mortar 1: 4 mix (One cement and four sand)20 mm thickincluding cost and conveyance of all materials, finishing, curing and all labour charges etc. complete as per Standard specification. |
| 19 | Supply and Delivery Fabrication of MSdoors and windows with outer frame andshutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using20mm square MS rods with lockingarrangements including two coats ofapproved enamel paint over coat of redoxide including cost of angles, plates,sheets, fabrication charges, cost of holdfast and transportation charges.(0.75x2.10m) etc., complete. |
| 20 | Door Double leaf 1.00mx2.10m |
| 21 | Toilet Door 0.75x2.10m |
| 22 | Door 0.90mX2.00m |
| 23 | Supplying and fixing of M.S. sheet window 1.20x0.90m using 18 gauge M.S.sheet with M.S. angle of size 40x40x6mm and M.S.flat 25mmx6mm and M.S. square bars including cutting, welding, fixing in position cost and conveyance of all materials to site and all labour charges etc., complete as per SS. |
| 24 | White washing two coats inculding cost and conveyance of all materials to site and all loboure charges etccomplete ( Celling only ) |
| 25 | Distempering two coats with approved Distemper over one coat of Primaring coat of Cement Paint cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying with standard specifications and as directed by the departmental officers. |
| 26 | Painting two coats with ready mixed plastic emulsion of first class quality paint and of approved colour over a priming coat including thorough scrapping clean removel of dirt,including cost of all materials and all labour charge etc complete as per standard specification. |
| 27 | Painting two coat of new iron works such as steel Doors, windows, ventilators, etc., with best approvedfirst quality of synthetic enamel paint of approved colour over the existing priming coats, etc. |
| 28 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming the closet using 40mm broken brick jelly in lime concrete flooring alround 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 29 | Supplying and fixing in position by means of 75mm long and 6.5mm dia counter sunk bolts and nuts embedded in the floor with rubber or fibre washers.Best quality and approved make white glazed earthern ware European water closet with P or S trap with seat and double flapped rigid PVC seat cover with chromium plated hinges, and giving necessary connection to PVC socket using 110 mm dia PVC pipe 6 kg/sqcm.of 0.60m length including supplying and fixing PVC tank of 10.00 litre capacity with all internal fittings witha pair of cast iron brackets and with all fittings such as 15mm dia nylon connection, 15mm dia GM wheel value, 15mm dia brass nipple including, labour charges for fixing the flushing tank on wall with teak wood plugs and screws, giving water supply connection, painting CI brackets with two coats of best approved quality synthetic enamel paint over a coat of red oxide primer, redoing the disturbed masonry and flooring to original condition, etc. complete complying with standard specification. |
| 30 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal) with a pair |
| 31 | Supply and fixing Cuddapah slab of 20/30mm thick including labour charges etc complete |
| 32 | Providing and fixing P.V.C. Rainwater Downfall pipes of 110mm diametre with necessary shoes, bends and other speicals, clamps, screws, nails, teakwood plugs etc., complete including cost of all materials.The rate is to include cost of removable cast iron Gratings of appropriate size.The size of teakwood plugs to be used is 150mm * 25mm in front and 200mm * 75mm in rear and all other sides with a depth of 100mm.The pipe is to be fixed by means of \"U\" clamps at the cnetre of the pipe screwed to the plugs.The special type of \"U\" clamps at the centre of the pipe to be fixed in addition to these for more than three metres pipe length, complete complying with standard specification. |
| 33 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) SD 25 |
| 34 | Supply and fixing of 1200 mm (48\") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18\") SD 106 |
| 35 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking Wall socket with 5A Flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. SD 36 |
| 36 | Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64 |
| 37 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron upright and end supports for mains SD 71 |
| 38 | Supply and fixing of single box type 4\"40 W flu fitting complete with copper choke and condensor with TW roundblocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 88 |
| 39 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V)32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting W reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 127 |
| 40 | Supply and fixing of 4\"40 W twin street light flu. fitting complete With copper choke and condensor with 19mm dia GI pipe (Class \"B\") with 1 No. 19mm GI Bend complete on the existing post / wall With 16 A aerial fuse unit on MS plate with PVC unsheathed Cu. leads, with MS clarnps and aluminium painting with Flu. Tubes SD 94 |
| 41 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD 83 |
| 42 | GST 18% |
