|
| 1 | Earth work in bulk excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge,All kinds of soil |
| 2 | P/L ofdry Stone soling dully hand packed hand rammed incl stone chippings, all carriages complete |
| 3 | Providing and laying in position cement concrete of specified gradeincluding curing but excl. the cost of centring and shuttering. all work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) all complete |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 6 | Supplying and filling RBM under rooms including compaction by ramming, watering etc all carriages complete |
| 7 | 12 mm cement plaster of mix 1 : 4 (1 cement : 4 fine sand) |
| 8 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40mm thick with 20 mm nominal size stone aggregate. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 10 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete,Welded. |
| 11 | Steel weldedin built up sections,framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in grating , frames, guard bar, ladder , railings , brackets, gates and similar works. |
| 12 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge |
| 13 | applying priming coat with ready mixed red oxide zinc chromate primerof approved brand and manufacture on steel galvanized iron,steel works |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade,two or more coats on new work |
| 15 | Providing corrugated G. S. sheet roofing high rib profile colour coated including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 16 | Providing coloured profile ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete, 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 17 | Providing & laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 18 | Carriage of material from approved source upto site of work by M/Ti) Stone agg. from Baramulla at an avg. lead of 35 Km |
| 19 | ii) Sand at an avg. lead of 15 Km |
| 20 | iii) Bricks at an avg. lead of 85 Km |
| 21 | P/F of information sign board made of iron with 50mmx50mmx6mm vertical posts with iron sheet of thickness 3 mm of size 600mm x 450mm enclosed along perimeter with angle iron of 30mmx30mmx 4mm ,painted in white with nomenclature of work with black paint incl all items and carraige and fixing of same in M-15 grade of concrete in 220mm x 220mm x 220mm .the overall height of board should not be less than 2000 mm. |
