Bridge And Roof Company I Limited has published Tender For Civil, Structural And Underground Piping Works For Petrochemical And Lube Integration Project Lupech (J-18) At Iocl Gujarat Refinery, Vadodara. Submission Date for this Tender is 18-08-2023. Lubricating Oils Tenders in vadodara Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Jun-2023 | CORRIGENDUM-1 | Technical Bid | 03-07-2023 |
| 2 | 03-Jul-2023 | CORRIGENDUM-II | Date | 10-07-2023 |
| 3 | 06-Jul-2023 | CORRIGENDUM-III | Date | 18-07-2023 |
| 4 | 18-Jul-2023 | CORRIGENDUM-IV | Date | 25-07-2023 |
| 5 | 26-Jul-2023 | CORRIGENDUM-V | Date | 31-07-2023 |
| 6 | 31-Jul-2023 | CORRIGENDUM-VI | Date | 09-08-2023 |
| 7 | 09-Aug-2023 | Corrigendum-VII | Date | 14-08-2023 |
| 8 | 14-Aug-2023 | CORRIGENDUM-VIII | Date | 18-08-2023 |
| Sl. No. | Item Description |
| 1 | TEMPORARY BARRICADDING |
| 2 | TEMPORARY BARRICADING (upto a height of 12m) : Fabrication& Erectingtemporary barricading using Structural steel, fixingsheets, maintaining thebarricading ingoodconditiontillcompletionofjobetc. complete all as per drawings,specifications and directionsof the Engineer-in-Charge with all labour. Scopealso includes:Frana Crane,hardstand, weldingmachines,all thetools& tackles, machineries, consumables, assembly, steel scaffoldingat all locationand all elevation,manpower,PPE, supervision,torqueingmachineetc. The quotedrate shall be inclusive of all the above. Trailer,Manlifter & Crane for erection will be supplied by B And R. The mode of measurement shallbe as follows:Themeasurement shallbe in metricton of finishedstructuralsteelweightas per drawing. Payment for steelworkshallbe madeon thebasisof weightof the structure acceptance. The weightof structuralsteelmaterials/plates shallbe calculatedwherevernecessaryon the basisof IS handbook.If sectionsare differentfromI.S. section,then manufacturers handbook shallbe adopted. Sections built out of platesshallbe paid on the actualweightincorporated.Welds,bolts,nuts, shims, packing plates, washers etc. shall not be measured.Rate of structuralsteel work shall be deemedto include the same. |
| 3 | CLADDINGSHEETS FOR BARRICADING STRUCTURE: Providingandlayingin positionapprovedqualityprofiled,pre-coatedcolourGI Sheetsof 0.50mmthicknessin barricading, including costofallmaterials, deliverytosite,cutting, metering, lapping, providing cut-outs forfixingaccessories and necessaryapprovedqualitycorrosionprooffastenerswith neoprenecappingand washersridges,valleys,gutters,guttersof requiredshape,apronpieces,flashingetcallcompleteandwithall accessoriesrequiredforthe claddingworksincluding necessaryscaffoldingfor erectionjobs and as shown on drawings,specifiedand directed. |
| 4 | Supplyand fixingof Transportable Multi-GasArea monitor,BM 25, Make: 3M-OLDHAM includingsupplyof all material,tools and tackles for fixing in the Barricadingstructure as per the Instructionsof Engineer in charge |
| 5 | STRUCTURAL STEEL WORKS (FABRICATION & ERECTION): Unloading/ loading of materials for transportation, storing, fabricating at B&R"s shop outside the plant boundary, transporting fabricated items to site. Fabricationof structuralsteelfor pipe rack, technological structures,circular/rectangularequipmentplatformswith ladders,toe-guards,spiralstairway,technological platforms,Hose reel stands,valve operatingplatforms,floor openings,interconnecting platforms,walkway,cross over, operatingplatformetc. as per drawingincludinglayoutmarking,cutting,bending,grindingwelding,NDT (ifrequired),inspection,complete in all respect tosatisfaction ofEngineer-in-Charge.Erection offabricated structural items, aligningbolting,fieldwelding,minor modifications/ rectification, torqueing,groutingasperthedrawingandthespecifications atalllevelsandatalllocations complete in all respects to the satisfactionof Engineer-in-Charge. Scopealso includes: Farana Crane for Fabrication/Erection,Hard stand for erection, weldingmachines,all thetools& tackles,machineries, consumables, assembly, steel scaffoldingat all locationand all elevation,manpower,PPE, supervision,torqueingmachineetc.Carryingout welderqualification and follows by B&R"s approved WPS/PQR. The quotedrate shall be inclusive of all the above.Trailer for shifting of Structral steel,Crane for erection and Manlifter as required will be provided by B And R. The mode of measurement shallbe as follows:Themeasurement shallbe in metricton of finishedstructuralsteelweightas per drawing. Payment for steelworkshallbe madeon thebasisof weightof the structure acceptance.The weightof structuralsteelmaterials/plates shallbe calculatedwherevernecessaryon the basisof IS handbook.If sectionsare differentfromI.S. section,then manufacturers handbook shallbe adopted. Sections built out of platesshallbe paid on the actualweightincorporated. Welds,bolts,nuts, shims, packing plates, washers etc. shall not be measured.Rate of structuralsteel work shall be deemedto include the same. |
| 6 | Structuralsteelconformingto IS:2062GradeE250B0 / E250BRas andJindalsectionlike UB,UC shallbe of GradeS275JR/JOconforming to BSEN10025as indicatedindesigndrawing,transporting, storingof rolledup section, squarehollowsectionetc, thatwillbe usedto build platforms,ladders,safetychainfor ladder,staircases,technological structures,pipe supports,strengthening of steel membersetc.Fabricationof StructuralSteelMaterialsinto StructuralElements/ Modulesas definedin the Fabrication/ DetailedDrawings. The fabricatedmembershall be taggedwith strip for identification as per fabricationdrawing. Inspectionand testing.offabricateditem shall be as per approvedIITP / QCP Arrangingrequired welders, labour, consumables, tools & tackles, equipment,etc. Loading, unloading, fabrication, intermediate handlingand shifting to paintingyard and bringingback from paintingyard to erectionsite or godown. Erection ofFabricated Structural SteelElements suchascolumns, beams, platforms, ladders, safetychainforladder, staircases,technological structures,pipe supports,strengthening of steelmembersetc / StructuralModulesin positionalong with fixing of all type of ConnectionBolts (Erection,Hot Dip Galvanised/Non-Galvanised Permanentbolts), supply and placingof shim platesas per Specifications. Scope shallinclude all activitieslike Bolting,Welding,Aligning,makingnecessaryalterationscauseddue to mismatchof Bolt Holes and / or during fabrication,Rate shall also include Torque Tighteningof Bolts, supply of shim plates & approvedweldingelectrodes,including makingtemplates,welding,(includingsealingthe joints of box sections with continuouswelding),finishingedges by grinding, cleaning,givingfinal touchesto the weldedparts,etc as requiredcompletein all respect.Makingnecessaryarrangement of requiredlabour,equipment,tools& tackles,steelscaffolding,consumables, etc to executetheworksat all heightsas per drawingsand specifications along with all relatedworks in order that the Structure is handed over to the complete satisfaction of the Engineer-in-charge. Note: Rate including supply of MS Nuts for Fire Proofing Works. |
| 7 | Same as item description14.0, (as describedin 14.1) Fabrication andErectionbut installingin the existing pipe rack. |
| 8 | GRATINGS: Erecting/ fixing in positionat all level and all locationELECTROFORGED GALVANISED (MinimumUniformthicknessshallbe 120 microns)STEELANTISKIDGRATING(purchasedfrom approvedmanufacturer by the contractor)confirmingto standardandspecification in operatingfloors,platforms,stair landing,catchbasin,drainsetc, prefabricated readymade25 mm thk. electroforged hot dip galvanisedMS self coluredGratings(minimumgalvanisedcoating of 900 gm/sq.m)of approvedmake and any shape/sizeas per design/ drawing/ standardswith mainmember of size 25x6 mm flat and secondarymemberof 8 mm sq.twistedbar respectivelyhavingpitch 35x100 mm conformingto standardsIS2062 GradeE250B0/E250BR, ASTMA36orequivalent,IS2629,IS4759etc.asperapproved make includingfixing of hot dip galvanisedclamps 25mm wide x 6mm thick, 50x5 thk clamp fixing plate and M8x55 mm long bolts / nuts / washers and includingmakingopeningabove 10" dia andprovidingedgeprotectionmemberof flat25x6foropeningswhereverrequired,allcompleteas perdesigndrawings, standards, specification and as directedby Engineer in charge. |
| 9 | For square/rectangular Gratings |
| 10 | For circular/curved Gratings |
| 11 | Same as above but with Heavy duty grating for Vehicularmovementareas with Flat 60 x 6 at 35mm C/C |
| 12 | HANDRAILING: Fabricating,erecting,cutting,bending,welding,bolting,GalvanizedM.S. pipe hand railing of height 1000 mm with top rail , verticalsas 32 mm NB (MediumClass)@1500mmc/c & midrailas 32 mm NB (MediumClass)pipes conformingto IS:1239 , including100 x 6 mm thick toe plate,bends,posts,etc., completeas perdesigndrawings,standards, specification andas directedby Engineerincharge. |
| 13 | HANDRAILING: Transportation, Erecting,cutting,bending,welding,bolting,GalvanizedM.S. pipe hand railing of height 1000 mm with top rail , verticalsas 32 mm NB (MediumClass)@1500mmc/c & midrailas 32 mm NB (MediumClass)pipes conformingto IS:1239 , including100 x 6 mm thick toe plate,bends,posts,etc., completeas perdesigndrawings,standards, specification andas directedby Engineerincharge. |
| 14 | Erecting,fixing on RCC pits, Rectangularditch etc. prefabricated ready made 40 mm thk. Galvanisediron (GI) MS self colouredGratings (minimumthicknessof galvanisingshall be 120 micron) of approvedmake and any shape/sizeas per design /drawing/standards with main member of size ISA 40x40x6 and secondarymember of 35x6 mm flathaving pitch 25 mm conformingto standardsIS2062 Gr.A, ASTM A36 or equivalent, IS2629, IS4759 etc. as per approvedmake, all complete as per design drawings,standards , specification and as directedby Engineer in charge. |
| 15 | Installingprefabricated readymade25 mm thk. electroforged hot dip galvanisedMS self colured stair tread with 6 mm thick chequeredplate nosing and 2 Nos. of 75 x 6 carrier plate (minimumgalvanisedcoating of 900 gm/sq.m)of approved makeandasperdesign/drawing/standardswithmainmember ofsize25x6mmflatandsecondary memberof8mm sq.twistedbar respectively havingpitch35x75 mm conformingto standardsIS2062GradeE250B0/ E250BR,ASTMA36 or equivalent,IS2629, IS4759 etc. Includingfixing of treads on stairs, fixing with clamps/ bolts, complete as per design drawings,standards, specification and as directedby Engineer-in-charge. |
| 16 | For Stair Tread of 900x275 mm |
| 17 | For Stair Tread of 750x275 mm |
| 18 | Dismantlingof BarricadingSteel structuresup to any height alongwithadjacent fittings /membersby cutting /de-boltingor by any othermeanswithout damagingthe remainingunit and loweringdown to the ground ,scaffolding,segregation of all the usable materialsThe job is inclusive of all requiredlabour, consumables,tools & tackles, machinery& equipment"sand transportation to thestoragepoint as directedby the Engineer-in-Charge,outside the battery area. |
| 19 | Dismantlingof exsitng grating after providingnecessarysafety handrailaraoundopeningat all height includingtools and tackles etc.The contractorshall stack the same at designatedplace as per engineer in charge. |
| 20 | Dismantling Of Barricadding GI sheet of any height and stackingwithin refinery area as directedby Engineer-in-Charge |
| 21 | Dismantlingof Above ground PIPING WORKS and stackingthe Pipe materailsat suitable locations within the Refinery Area as directedby Engineer-in-Charge |
| 22 | Dismantlingof Electricallighting poles, cable trays, tray supports & Cables etc includingstackingof serviceablematerials includingscrap cables as advised by E-i-C at suitable locations within the Refinery and disposalof un-serviceable materialsat suitable locations ouside the Refinery Area.The unit rate shall include getting necessaryapprovalfrom local municipal authority (NOC) and land owner includingall statutory expensesfor disposalof debris |
| 23 | Dismantlingand removalof under ground (upto 5 M depth) carbon steel pipe by gas cutting or by grinder (after removing coating and wrapping)from various locations includingremovalmaterial,fittings, flanges, valves, vents, drains, branchingetc.; pullingup the same to ground level with due care so that no other piping, equipments,machinerysetc. is damagedand cutting into pieces, if required;segregatingfor reclaiminguseful fittings such as bends, flanges, valves, by unbolting,gas cutting, cold cutting etc.; transportingand stackingthe salvageableuseful materialsto workshop/ store or as per the direction of the Engineer-in-Charge and shifting the scrap pipes etc. to scrap yard or any other location within refinery premises and completingthe job as per the instructionsof Engineer-in-Charge. Job also includes supplyingof all types of tools & tackles, lifting arrangements, equipment,machineries, all consumables & labour etc. to complete the work in all respects in a workman like manner includingarea preparation,taking clearancefor hot/coldjobs, blinding and de-blinding,area cleaningafter completionof work, flushing whereverrequiredas directedby the Engineer-in-Charge. Note : 1. Carryingout the job is under contractor"sscope and the same has to be compliedwith as per the directionsof the Engineer- in-Charge. 2. Civil works (excavationand back filling) for underground dismantlingshall be paid under separate item from Civil SOR. 3. Contracorshall get necessarywork permit from the refinery authoritiesprior to the above works |
| 24 | Re-erectionof Uninstalledstructuralsteel at any height and location all complete includingtools,tackels,consumables etc.to the satisfactionof Engineer in charge. |
| 25 | UG WORKS |
| 26 | FABRICATION AND LAYING OF UNDER GROUND3LPE COATED CS PIPING 3LPE coated pipe, fabricationincludingcutting, edge preparation,(inclusive of grindingthe edges of pipe, fittings,flanges, etc. tomatchwiththematingedgesofuneven/differentthicknesswhereverrequired); fitup,bending, preheating wherever required,weldingof joints,threading,andlayingof pipes in trenchesof all typesand thicknessafter excavation,concrete, RCCuptotherequired depthincluding pipesleeves, cutting ofroadwherever required andmaking good thesame, hydrotesting, drying the pipeline with compressedair, applicationof 3 LPE coat on joint at site, before backfillingthe trenches etc. completeas per drawings,specification and instructionsof Engineer-in-charge. The rate shallinclude providingall tools, tackles,machinery, Construction equipments,Steel Scaffoldingas per safety norms, all consumables includingwelding rods, fillermaterials,Gasesformetal cutting ,Grinding &Cutting wheels, erection equipment likecrane, instruments,local barricading/ weldingbooths,labour,ancilliariesetc. to completethe work in all respectsas per drawings.3LPE coatedpipe shall be free issue material: |
| 27 | FABRICATION OF UNDER GROUND3LPE COATED CS PIPES( ASME B31.3 -EFW, Pipes, ASME B36.10, API 5L Gr.B PSL1, BevelledEnds,External 3LPE coated) including3LPE coat on joint at site |
| 28 | LAYING OF UNDER GROUND3LPE COATED CS PIPING |
| 29 | DYEPENETRATION TESTFORPIPINGWORKS:Performance ofdyepenetration testincludingsupplyofallnecessary materials,penetrant,developeretc. along with all equipments,labour,for carryingout the work as per specification & direction of engineer -in-chargeat all elevations.Test has to be carriedout in all metallurgythe test has to carry out on all schedulesof pipes. The rate shall also include Cleaningof joints after DPT |
| 30 | RADIOGRAPHY OF PIPINGWORKS: Performance of radiographicinspectionon pipingof alltypes& thicknessincluding providingorhiringofallnecessaryequipment andwhateverelseeventhoughnotexpresselymentionedbutrequiredto performtheworkas per specifications andinstructionsof Engineer-in-charge.Ratesareinclusiveof radiographymachine, manpower, consumables,Barricadingwithwarninglights,inculdinggettingrequiredpermitsetc.andallotherequipments requiredto perform the radiographyat all heightsto the satisfactionof Engineer-in-charge.Radiographs shall be submittedto the Engineer-in-charge. (RepeatRadiography due to defectiveradiographon repairedjoints due to Contractor"sfault and for additionalradiographynecessitated due to poor performance of contractor"sweldersshallbe done at contractor"scost. (Film radiagraphyby gamma rays) |
| 31 | Miscellaneous cutting/welding works (applicablefor specific works as per issued drawings , modificationworks/miscellaneous works as per directionsof E-i-C) |
| 32 | Gas cutting in Structuralbeams,plates etc |
| 33 | Grindingin Structuralbeams, plates at cutting locations etc |
| 34 | Weldingin Structuralbeams,plates etc |
| 35 | Making holes in Structuralbeams,plates etc |
| 36 | Upto 30mm dia. |
| 37 | Upto Above 30mm dia. |
| 38 | Gas cutting in Pipes etc |
| 39 | Grinding& fitups in Piping etc |
| 40 | Weldingin pipes etc |
| 41 | MANPOWER SUPPLY: Contractor to provide & mobilise following manpower as per instructions of B AND R Engineer in-charge. However, 2 weeks" notice shall be given for mobilisation and 1 day notice shall be given for demobilisation. Note that quoted rate of manpower deployment shall be inclusive of required PPEs and facilities required for functioning at site. (1 Man-Month should be considered as 30 man-days). |
| 42 | Lead Safety Officer/Safety Engineer : Qualification BE/B Tech in any Branch of Engineering with mimimum 05 years of Experience in Construction work& should posses Degree or Diploma in Industrial Safety OR Diploma in any Branch of Engineering with mimimum 10 Years Experience in Construction work for&should posses Degree or Diploma in Industrial Safety |
| 43 | Safety Officer/Safety Engineer : Qualification BE/B Tech in any Branch of Engineering with mimimum 02 years of Experience in Construction work& should posses Degree or Diploma in Industrial Safety OR Diploma in any Branch of Engineering with mimimum 5Years Experience in Construction work for&should posses Degree or Diploma in Industrial Safety |
| 44 | QA/QC Engineer :Qualification BE/B Tech in relevant Branch of Engineering with minimum 02 years of Experience in Conctruction Work or Diploma in relevant Branch of Engineering with mimimum 04 years of Experience in Construction work |
| 45 | Safety Supervisor:Qualification Graduation Degree in Science or Diplomain Engineering with mimimum 02 years of Experience in Construction Work |
| 46 | "NOTE:- THE ABOVE RATE SHALL BE INCLUSIVE OF ALL TAXES & DUTIES, ROYALTIES, CESS, FEE, ENVIORMENTAL & POLLUTION, FITNESS & SAFETY CLEARANCE CHARGES (IF ANY), OR ANY OTHER INCIDENTAL CHARGES ETC BUT EXCLUDING GST." |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
