|
| 1 | Dismantiling ofAC sheet (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | Dismantiling ofCGI/PGI sheets any thicknessas in roof coverings complete all as specified and directed. |
| 3 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 4 | S & F pre painted galvalume aluminum zink coating GI based plain steel sheet 0.50 mm thick of any colour having tensil strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws all as specified and directed. |
| 5 | Fixing only 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc and complete all as specified anddirected. |
| 6 | Fixing only 0.63 mm thick galvanised, corrugated mild steel sheeting with zinc coating120 gram/sqmtwo corrugationsside lap & 150 mm end lap ,fixedwith \"L\" type or \"J\"type or crancked hookbolt and washers orwithself drilling zinkallum coated metal screws having cap with rubber washers complete all as specified and directed. |
| 7 | S&Fin repair2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc all as specified and directed. |
| 8 | S & Fin repair1.00 mm thick PGI sheeting of class -VIII asinvalley gutters, wall cladding, iron gates and straight flashings etc ,fixedwith \"L\" type or \"J\"type or crancked hookbolt and washers or with self drilling zink coated metal screws having cap with rubber washers andsealed the joint of valley gutter with comercial bitumen 80/85 grade complete all as specified and directed. |
| 9 | Hacking out old broken glass ( any thickness ,size ,quality or desceiption ) form wooden frames or stone,cocrete or brick surrounds glazing with putty or fixed with beads all as specified and directed. |
| 10 | S&F rough cast wired figured glass 5 to 6.4 mm thick and glazing with oil putty /beadssquare exc 0.4 but n.exc 0.75 sqm all as specified and directed. |
| 11 | S&F3 mm thick sheet glass ordinary quality and glazing with putty in square n.exc 0.5 sqm min each pan all as specified and directed. |
| 12 | S & F in repair Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembedinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 13 | Taking downwoodenroof truss exc 8 m but n.exc 13 m compled rafters or trussed beamsspan all as specified and directed |
| 14 | Dismantling timber frame work scantlings ,purlin 40 Sq. cm and over in section and in any position complete all as specified & directed. |
| 15 | S&F roof truss (framed) trussed, purlins, crane gantries, rails and fasterning and heavy bracket framing (beam ,tee,angle,channel or flat section ) including distnace pieces cleats,platesetc confirming to Fe 410 grade E-250 quality A complete all as specified and directed. |
| 16 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone as in bed block and copping and benching embedding of hold fast etc including demolition of old plain cement concretecomplete all as specified and directed |
| 17 | Demolition of brickwork or including allquoins, arches, pillars, etc, bilt in cement mortar complete all as specified and directed. |
| 18 | M & L brickwork withsubclass ‘B’burnt bricks,old sizestraight or curved on plan exc 6m meanradius built in cement mortar1 : 6 complete all as specified and directed. |
| 19 | All as per item No. 18here in before except bricks and complete all as specified anddirected. |
| 20 | Taking down cement plaster on bricks or concrete surfaces including raking out joints for key, scrubbing down with water etc complete all as specified and directed. |
| 21 | M&L for rendering 15 mm thick in cement mortar 1 : 6 by using on fair faces of brick or concrete surfaces finished even and smoothwithout using extra cement complete all as specified and directed. |
| 22 | M&L for rendering 15 mm thick in cement mortar 1 : 4 by using on other thanfair faces of brick or concrete surfaces finished even and fairwithout using extra cement complete all as specified and directed. |
| 23 | M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed. |
| 24 | M&L for preparation of newly plastered surfaces of wall and applyingtwo coat of cement base paint over a coat of cement primer complete all as specified and directed. |
| 25 | M & L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 26 | M & L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 27 | Demolationof cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and complete all as specified anddirected. |
| 28 | M & L100 mm thick PCCtype B-2, 1:2:4 (40mm graded aggregate) for flooring complete all as specified and directed. |
| 29 | M & L75 mm thickPCC type C-2, 1:3:6 (40mm graded aggregate) as in plinth protectioncomplete all as specified and directed. |
| 30 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar and complete all as specified anddirected. |
| 31 | M&L for non skid ceramic colour tiles joint free 7 to 8 mm thick (Square /rectangle) area of each tile excedding 0.18 sqm but not exceeding0.38 sqm, in floors etc. set andjointed in neatcement slurry and ponted in white or colouredcement to match over 15 mm thick scread bed in cm 1:6. |
| 32 | All as per item No-31 but on verticle surfaces such as skirting/dado over 10 mm thich rendering in cm 1:4. |
| 33 | M&L for glazed ceramic coloured tilein vertical surface450x300x7mm thick set in jointedin neat cement slurry and pointed in white or colour cement to matchover 10 mm thick rendering in cm 1:4. |
| 34 | S&F in repair110 mm bore PVC (SWR) Soil waste, rain water pipe and vent pipes single socketed in any length with rubber ring joints fixed to walls including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge. |
| 35 | S&F in repair 110 mm bore PVC (SWR) bends of any radius with access door including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge. |
| 36 | S&F in repair 110 mm bore PVC (SWR) branch piece single equai or unequal including making good disturbe portion to match the existing complete all as specified and directed by the Engineer-in-charge. |
| 37 | S&F in repair rain water pipes of mild steel black sheet 0.5 mm thick and 150 mm bore in suitable length and shape including welding as per site requrement complete all as specified and directed |
| 38 | M&Lin repair 3 mm thick polycorbonate corrugated sheeting with corrugations as in roof/wall covering fixed with coach screw any hight complete all as specified and directed. |
