Military Engineer Services-MES has published Tender For Ge U(N) 32 2023 24 Repair To Flooring Joineries Plastering Plinth Protection Brick Work Roofing In Otm Units Of Jne And Petty Repair To Jne Under Age B R Ii Of Ge (N) Udhampur. Submission Date for this Tender is 10-07-2023. Shed Construction Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Jul-2023 | corigendum1 | Other | 03-07-2023 |
| 2 | 03-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-07-2023 |
| Sl. No. | Item Description |
| 1 | Minor repairsand attending to water leakage complaintsfrom Bib taps, flushing cisterns, wash hand basins GI pipe line and other sanitary fittingS&Fixtures and any obstruction to water supply, requiring plumber work such as replacement of washers, GI nipple GI socket, any other GI fitting check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), M-seal, screws, nails to make water supply/ plumbing lines functional and leak proof complete all as specified and as directed by Engr-in-Charge.Note : 1. The rates included forTwo Plumber (Skilled person & Two Helper (Semi skilled person) for attending the daily complaints Necessary recovery should be done in case of complaints should not done in same day @ Rs 250 per complaint & as directed by Engr -in-charge.2.Any item required to be replaced shall be paid under respective item and in that case thisitems shall not be measured and paid.3After attending the complaint the complaint slip shalldeposited back to concern Je /Engineer in charge and same should be requried at the time of payment . |
| 2 | Minor repair/easening/ Checking of joinery (wooden/steel) iron/ aluminium mongery, pelmet box, door springs etc requiring carpentry work such as tightening of screws/nails, minor adjustment of joinery, door and welding work etc including petty repairs material like screws /nails, plug etc. to make it functionalcomplete all as specified and as directed by Engr-in-Charge. Note : 1. The rates included forTwo Carpenter (Skilled person & Two Helper (Semi skilled person) for attending the daily complaints Necessary recovery should be done in case of complaints should not done in same day@ Rs 250 per complaint as directed by Eng-in-charge. 2.Any item required to be replaced shall be paid under respective item and in that case thisitems shall not be measured and paid.3After attending the complaint the complaint slip shalldeposited back to concern Je /Engineer in charge and same should be requried at the time of payment . |
| 3 | Dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | M&L forNon skid colouredceramic tiles area of each tile exc. .18 sqm but n.exc. 38 sqm 7mm to 8mm mm thick as in floor finishesset and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM(1:4) incl skirting and including demolition of cement concrete.all as specified & directed by Engr-in-Charge. |
| 5 | S&F Glazed ceramic tiles (coloured) on vertical surfaces of of size 450x350x7mm/350x250x7mmthick set and jointed in neat cement slurry over 10mm thick rendering in CM 1:3 and pointed in coloured cement to match complete all as specified and as diredted. |
| 6 | M&L for18 to 20mm thick,Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types over 20 mm th screed bed in CM 1:4 complete all as specified & directed by Engr-in-Charge. |
| 7 | M&L forrounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), all as specified & directed by Engr-in-Charge. |
| 8 | M&L fortaking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed by Engr-in-Charge. |
| 9 | M&L for15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. complete all as specified & directed by Engr-in-Charge. |
| 10 | M&L for10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even andsmooth mixed with water proofing compoundcomplete all as specified & directed by Engr-in-Charge. |
| 11 | Supply only integeral water proofing compoundcomplete all as specified & directed by Engr-in-Charge. |
| 12 | M&L for5 mm thick rendering on Ceiling / concrete surfaces in cement mortar 1:3 and finished even andsmooth mixed with water proofing compound complete all as per specified. |
| 13 | M&L forproviding 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete complete all as specified & directed by Engr-in-Charge. |
| 14 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete complete all as specified & directed by Engr-in-Charge. |
| 15 | All as per item above but exceeding 1.5 Sqm and not exc 4 Sqm each. |
| 16 | M&L forpressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer all as specified & directed by Engr-in-Charge. |
| 17 | M&L forpressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, complete all as specified & directed by Engr-in-Charge. |
| 18 | M&L forfactory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treatedcomplete all as specified & directed by Engr-in-Charge. |
| 19 | All as per item above but glazed and skeleton shutter with sash bar for glass / wire gauge. all as specified & directed by Engr-in-Charge. |
| 20 | M&L forproviding cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified & directed by Engr-in-Charge. |
| 21 | S&F Aluminum anodised bolts barrels tower bolts with bright both 150mm longcomplete all as specified & directed by Engr-in-Charge. |
| 22 | S&F Aluminium alloy ,anodised,sliding door bolt300 mm length with hasp,staple (bolt type) andfixing clip of sheet,cast or etruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed as per specified. |
| 23 | S&F Alunminium handle cost type 150mm long oval typecomplete all as specified & directed by Engr-in-Charge. |
| 24 | M&L forpreparation of new woodensurfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimer complete all as specified & directed by Engr-in-Charge. |
| 25 | M&L forpreparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surfacecomplete all as specified & directed by Engr-in-Charge. |
| 26 | S&F in repairs vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection P trap etcto drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc complete fixed in repair .all as specified & directed by Engr-in-Charge. |
| 27 | S&F vitreous china squatting pan ‘Orissa’pattern size 580X440mm , white with integral foot rest (Excludingflushing system and flush pipe) with ‘P’ or ‘S’trap fixed in repairsall as specified & directed by Engr-in-Charge. . |
| 28 | S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve,float and handleof low or high density and 15mm PVC connection 450 mm long complete.all as specified & directed by Engr-in-Charge. |
| 29 | Demolition of brick work or stone boulder masonery built in cement mortor including all quoins arches pillars etc complete all as specified & directed by Engr-in-Charge. |
| 30 | M&L forbrick work with sub class "B" bricks straight or curved on plan exc 6m mean radius butt in cm 1:6 complete all as per specified. |
| 31 | M&L forhalf brick work with sub class "B" brick straight or curved on plan exc 6m mean radius but in cm 1:4 complete all as per specified. |
| 32 | S&F in repair Viterous china wash basin pedestral type white flat back size 550 x 400mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65 x 65 xincl6mm embedded in PCC block with PCC 1:2:4 type B-1 and Incl 450mmPVC waste pipegetting with holescomplete all as specified & directed by Engr-in-Charge. |
| 33 | S&F in repair Wash hand basin vitreous china white flat back size 580 x 450 mm includingwaste pipe,pillar cock 15 mm waste chain and plug and porcelain stopper and brackets fixed in repairs including 15 mm PVC connection 450 mm long in repairs complete all as per specified. |
| 34 | S&F pillar taps cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed of iron pipe of bore 15mm complete complete all as specified & directed by Engr-in-Charge. |
| 35 | S&F PVC connection 15mm size with PTMT nuts of length 450mmcomplete all as specified & directed by Engr-in-Charge. |
| 36 | S&F in repairTowel rail 600mm long aluminium tower bolts 20mm D typecomplete all as specified & directed by Engr-in-Charge. |
| 37 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed by Engr-in-Charge. |
| 38 | Prep of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 1mm wall care putty including complete removal of existimg treatmenta complete all as specified & directed by Engr-in-Charge. |
| 39 | M&L fortwo coat of cement base paint over newly plastered surfaces of wallincluding preparing surfacescomplete all as specified & directed by Engr-in-Charge. |
| 40 | M&L fortwo coat of white wash over newly plastered surface ib ceilingincluding preparing surfacescomplete all as specified & directed by Engr-in-Charge. |
| 41 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia.complete all as specified & directed by Engr-in-Charge. |
| 42 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia. complete all as specified & directed by Engr-in-Charge. |
| 43 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 25mm dia.complete all as specified & directed by Engr-in-Charge. |
| 44 | S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm borecomplete all as specified & directed by Engr-in-Charge. |
| 45 | S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore complete all as specified & directed by Engr-in-Charge. |
| 46 | S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 25mm borecomplete all as specified & directed by Engr-in-Charge. |
| 47 | S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm dia. complete all as specified & directed by Engr-in-Charge. |
| 48 | S&F in repair 15mm Bib taps, cast copper alloy, fancy type chromium plated,with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified & directed by Engr-in-Charge. |
| 49 | S&F inPVC connection 15mm size with PTMT nuts of length 600mmcomplete all as specified & directed by Engr-in-Charge. |
| 50 | S&F in repair Rotational moulded polyethlene water storage tanks three layered white in colour(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 500 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge. |
| 51 | S&F in repair Rotational moulded polyethlene water storage tanks three layered white in colour(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 1000 Ltr including dismantling & remove old tank from site all as specified & directed by Engr-in-Charge. |
| 52 | S&F Ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixedcomplete all as specified & directed by Engr-in-Charge. |
| 53 | S&F Ball brass valves 15 mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixedcomplete all as specified & directed by Engr-in-Charge. |
| 54 | S&F Ball brass valves 25mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixedcomplete all as specified & directed by Engr-in-Charge. |
| 55 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concretecomplete all as specified & directed by Engr-in-Charge. |
| 56 | PCC 1:4:8 type D-2 as in floors 75mm thick complete all as directed & specified. |
| 57 | M&L for40 mm thick flooring in PCC 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even and smooth using extra cement (staircase incl steps).complete all as specified & directed by Engr-in-Charge. |
| 58 | S&F Towel Ringfixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)complete all as specified & directed by Engr-in-Charge. |
| 59 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for cement concrete |
| 60 | M&L forRCC M-25 type B1 1:2:4 design mix(using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified & directed by Engr-in-Charge. |
| 61 | M/L RCC M-25 type B1 1:2:4 design mix Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering with water proofing compound as directedlaid/made to slope as in RCC roof surfaces complete all as specified & directed by Engr-in-Charge. |
| 62 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)complete all as specified & directed by Engr-in-Charge. |
| 63 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm widecomplete all as specified & directed by Engr-in-Charge. |
| 64 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified & directed by Engr-in-Charge. |
| 65 | Mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified & directed by Engr-in-Charge. |
| 66 | S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mmcomplete all as specified & directed by Engr-in-Charge. |
| 67 | Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge. |
| 68 | Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge. |
| 69 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 all as per specified. |
| 70 | Providing and fixing 30mm thick factory made PVCdoor shutter consisting of panel of Hollow PVCProfile of 24mm thickness, consistingof frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottomrails and two 19mmx19mm MS tubes inserted horizontallyinside the hollow profile section at an equal distance from top and bottom of door and fixed withhollow profile section using 3mm thickPrelam PVCsheet using screws. Hollow PVCprofile shall belipped with 10mm (5mmx2) thickx 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mmthick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etccomplete as per direction of Engineer-in-Charge,manufacturer"sspecification and drawing,complete all as specified & directed by Engr-in-Charge. |
| 71 | S&F WithWood free EPS Factory made solid pvc moulded door shutter 28 to 30mm thick (stiles) with 2,4,6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face & Fixing in frame at site as per specified and directed by Engr-in-Charge. |
| 72 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings, complete all as specified & directed by Engr-in-Charge. |
| 73 | M&L for18/19mm thick prelaminated particle board medium density flat pressed single layer type or three layer type with BWR type adhesive.complete all as specified & directed by Engr-in-Charge. |
| 74 | Flush shutters, 25 mm thick ,solid core construction, with block board core and plywood face panels, commercial type on both sides, including beading complete all as specified & directed by Engr-in-Charge. |
| 75 | Hasp and staple, 100 mm, mild steel, safety type, stove enalmelled black , including bolt to hinge plate and fixed with screws, all as specified . |
| 76 | S & F Continuous ( Piano ) hinges, mild steel, bright finish or electrogalvanised width of flap 30mmcomplete all as specified & directed by Engr-in-Charge. |
| 77 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified & directed by Engr-in-Charge. |
| 78 | S&F Aluminium extruded section hydraulically door closer regulated designation no-1 universal type suitable for door shutter upto 700mm in width & of weight not more than 35 kgall as specified & directed by Engr-in-Charge. |
| 79 | Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,complete all as specified & directed by Engr-in-Charge. |
| 80 | S&F non asbestos fibre Cement board ceiling 4mm, thick in 605x605mm panel (Make-everest) designed ceiling conforming to IS-14862 type B category threeincl snapgrid frame work, hold fast, suspenders fixed in repair complete all as specified & directed by Engr-in-Charge. |
| 81 | S&F in repair Solid PVC Wall Lining ( Wall Panelling) consisting of 5mm thicksingle side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & directed by Engr-In-Charge |
| 82 | Hacking out old broken glass any thickness, size quality from wooden frame or steel frame glazed with putty or fixed with beads complete all as specified & directed by Engr-in-Charge. |
| 83 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified & directed by Engr-in-Charge. |
| 84 | S&F4 mm thick figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge. |
| 85 | Dismantling of CGI/AC/ any otherssheet of any description incl ridges etc all as specified & directed by Engr-in-Charge. |
| 86 | Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with selftapping screws complete all as specified & directed by Engr-in-Charge. |
| 87 | Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with selftapping screws complete all as specified & directed by Engr-in-Charge. |
| 88 | S&F in repair Galvanised mild steel corrugated mild steelsheeting with two corrugation side lap fixed with L-type or J- type hooks 0.63mm complete all as perspecified and directed by Engr-in-Charge. |
| 89 | Supply and fixing PVC (SWR). Pipe 110mm dia in any length with rubber ring joints, fixed to walls any height including taking downcomplete all as specified & directed by Engr-in-Charge. |
| 90 | Supply and fixing PVC (SWR). Pipe 75 mm dia in any length with rubber ring joints, fixed to walls any height including taking down all as directed. |
| 91 | S&F plastic water closet seat cover, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed in repair, complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F fancy typeCurtain rods , metal polished 25 mm dia, and fixing brackets of required size( two Nosend brackets and two Nos wall brackets fixed with wooden gutties and screws) fixed in repair, complete all as specified and directed by Engineer-in-Charge( fixed as in Repair) |
| 93 | S&F mild steel CP conduit pipecurtain rod 20mm dia with holder/bracket, stop,rollers etc fixed in repair, complete all as specified and directed by Engineer-in-Charge. ( fixed as in Repair) |
| 94 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed( fixed as in Repair) complete all as specified & directed by Engr-in-Charge. |
| 95 | S&F 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms).( fixed as in Repair) |
| 96 | S&F for CP brass nipple for 15mm cp bib tap including all necessary fittings complete all as specified and as directed.( fixed as in Repair) |
| 97 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all asspecified and as directed.( fixed as in Repair) |
| 98 | S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms), fixed in repair complete all as specified and asdirected.( fixed as in Repair) |
| 99 | S&F PVC waste pipe for wash hand basin,kitchen sink with grating & union for discharge pipe complete all as specified and as directed by eng-in charge.( fixed as in Repair) |
| 100 | S&F centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered "Hot" & "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, fixed in repair complete all as specified and directed.( fixed as in Repair) |
| 101 | S&F sink wall mixer, brass, chromium plated,fancy type, with capstan head handles screwed down high pressure, withlettered "hot" and "cold", including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection,fixed in repair, complete all as specified and directed.( fixed as in Repair) |
| 102 | S&F shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with & including CP brass arm and wall flange, fixing to steel pipe or union as in repair complete all as specified and directed.( fixed as in Repair) |
| 103 | S&F angle valve, brass, chromium plated, fancy type,with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection fixed in repairs complete all as specified and directed. Make : Jaquar cat part No- CON-053KN, Cera- QTF 2006201 |
| 104 | S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair complete all as specified and as directed. |
| 105 | S&F plate rack of size 750 x 750 x 300mm made of selected quality 0.63mm thick stainless sheet, of shape and design as approved by GE, fixed with brass screws and rawl plugs complete all as specified and directed.Make- Nirali.( fixed as in Repair) |
| 106 | S&F 32 mm Bore of trap Brass chromium plated bottle traps for wash basins with inlet and outletscrewed for pipe or connections including necessary packing, union and cap. ( fixed as in Repair)complete all as specified & directed by Engr-in-Charge. |
| 107 | S&F health faucet, brass, chromium plated, with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed. Make - Jaquar cat part No- ALD-573, Cera- F 8030103 or equivalent as approved by GE |
| 108 | S&F jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed complete all as specified and as directed.( fixed as in Repair) |
| 109 | S&F soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws, fixed in repair complete all as specified and directed. ( fixed as in Repair) |
| 110 | Dismantling of wrought iron or mild steel dia work of any description complete all as per specified and directed by Engr-in-Charge. |
| 111 | S&F in repair Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conf to IS 1161-1998 grade St-240 all as per specified and directed by Engr-in-Charge. |
| 112 | S&F in repair Roof trusses (framed) trusses purlins cranes / ganttries , rails & fastering & heavy bracket cleats (including distanence pleus cuats etc) Fe-410W (Gde-E-250 quality-A) complete all as per specified and directed by Engr-in-Charge. |
| 113 | M&L forMachine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 grade with grey cement and pigment complete complete all as specified & directed by Engr-in-Charge. |
| 114 | M&L for 2nd class hard woodsmall fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete complete all as specified & directed by Engr-in-Charge. |
| 115 | M&L for preparation of new woodensurfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimer complete complete all as specified & directed by Engr-in-Charge. |
| 116 | M&L for preparation of old wooden painted surfaces as exc 10cm width or girth and applying one coat of synthetic enamel paint with proper filling by filler material complete all as per specified. |
| 117 | M&L for25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete complete all as specified & directed by Engr-in-Charge. |
| 118 | M&L forvitrified ceramic tiles any colour 10mm thick(Square or rectangular) poliahed, area of each tile not exceeding 0.36 sqm in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed 15mm thick of CM 1:4all as per specified & directed by Engr-in-Charge. |
| 119 | M&L forpreparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surfacecomplete all as specified & directed by Engr-in-Charge. |
| 120 | M&L forpreparation of old steeland iron surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of red oxide zinc chromeprimer completespray painting complete all as specified & directed by Engr-in-Charge. |
| 121 | M&L forPreparation ofold decorated surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply one coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 122 | M&L for complete removal of existing treatment onwalls surfaces and applying two coat of cement base paint (colour/white) over one coat cement primer complete all as specified and directed. |
| 123 | M&L for prep of old decorated surfaces and applying two coats of oil boumd distemperon walls over a coat of wall care putty including complete removal of existing treatmenta complete all as specified & directed by Engr-in-Charge. |
| 124 | Rendering 15mm thick on fair face of brick work or concrete surfaces with CM (1:4) even & smooth w/o using extra cement on roof surface complete all as per specified. |
| 125 | Priming the roof surface with bitumenous primer @ 0.3 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weightnot less than 3 Kg per Sqm with centre layer core of 90 micron high molecular densitypolyethylene film and bonded completely to thesurface with overlap of 10cm (overlap to bethermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm including taking down existing membrane sheet incl plastering all as specified and as directed. NOTE The WPT should be executed only by the authorized applicator of the membrane and contractor shall be submitted the same before execution of work . |
| 126 | M&L for two coats of aluminium paint on roof padding surfaces complete all as specified and as directed. |
| 127 | Supply and fixing toilet paper holder of cast copper alloy, chromium plated, fixed as in repair complete all as specified and directed. |
| 128 | S & F in repairs vitreous China bowl urinal flat back size of 465x355x265mm white (miniumum) with grating & union for discharge pipe (excluding flushing cistern,) including waste fittings complete all as specified & directed by Engr-in-Charge. |
| 129 | S & F in repairs stainless steel sink 1 mm thick with drain board, rawl plug washers and waste pipe including fixing MS angle iron brackets of size 25mm x 25mm x 4mm thick overall size of sink 915 mm x 460mmbowl size 410mm x 330mm x 160mm all as spd & directed. |
| 130 | Mortice lock, vertical type, size 100 mm 4 levercomplete all as per specified and directed by Engr-in-Charge. |
| 131 | M&L for chromium plated mixing valve, wall mixer 2 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 1m long bend pipe including three joints to steel pipe or unions complete all as per specified. |
| 132 | S&F 5 mm thick tinted sheet glass ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane complete all asspecified complete all as specified & directed by Engr-in-Charge. |
| 133 | S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete complete all as specified & directed by Engr-in-Charge. |
| 134 | S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified & directed by Engr-in-Charge. |
| 135 | S&F Powder coated Anodised aluminium frame for doors/windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed by Engr-in-Charge. |
| 136 | Taking down shutter exc 1 sqm and n. exc 2 sqm each complete all as per specified and directed by Engr-in-Charge. |
| 137 | S&F in repair PVC (SWR) bends in any radius 110mm bore in repairs complete all as spd and directed by Engr-in-Charge. |
| 138 | S&F in repair PVC (SWR) bends in any radius 75mm bore in repairs complete all as per specified and dir by Engr-in-Charge. |
| 139 | Cutting chases, pinning in, making good to facing in bricks wall where required and pointing in cement mortar 1:3 to concealed water tubing/stone slab n. exc 10cm girth complete all as perspecified and directed by engr-in-chrge .Note :-Contractorto ensure to produce sample of material of each item incorporating in work before execution to Eng-in-charge in every lot wise and proper register to be maintained all material should be duly approved by competent Engineer Authority. |
| 140 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
