|
| 1 | Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead as directed from edge of cutting . All kinds of soil. |
| 2 | Supplying and laying of stone soling hand packed tightly including ramming, watering and carriages complete |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels. 1:3:6 (1Cement: 3 fine sand: 6 graded stone aggregate 20mm nominal Size) Crushed |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels.1:1.5:3 (1Cement: 1.5 finesand: 3 graded stone aggregate 20mm nominal Size) Crushed |
| 5 | Form work.Centering and shuttering including strutting propping etc. removal of form work in Foundationslab footings basis of columns beams etc. for all types of concrete work. |
| 6 | Providing and laying polished vitrified tiles of size 600x600mm (thickness to be specified by the manufacturer)in floor & walls of approved make in all colors, shades as approved by engineer- in-charge including pointing the joints with matching pigment or any other relevant pigment as directed including cleaning the floor after finishing of work. including skirting (Sample to be approved by Competent Authority) |
| 7 | Half brick masonry with bricks of class designation 75 in superstructure up to all floor levels.In cement mortar 1cement: 4 fine sand mortar |
| 8 | 12-15mm thick cement plaster on brick work / concrete work of mix1:6(1cement: 6 ) coarse sand) |
| 9 | 6mm thick cement plaster on brick work / concrete work of mix 1:3 (1cement: 3 coarse sand) |
| 10 | Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete incuding filling of gaps near soffit |
| 11 | Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete up to all floors. Thermo mechanically heated bars |
| 12 | Finishing with Apex paint (one or more coats) at all locations prepared and applied as per manufacturer’s specifications, etc. complete on all surfaces including scaffolding |
| 13 | P&F Aluminum work for doors, windows, ventilators etc,sliding doors & windows ,G channels /Sliding channels using extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make , fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc with glazing of 5mm thick opaque/translucent glass. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. ( including cost of Glazing, paneling and dash fastenPowder coated aluminum (minimum thickness of powder coating 50 micron) 4\"x1.75\"(16 gauge) |
| 14 | Removing of existing rollingshutters & refixing the same including stacking within the university campus as per direction of EIC |
| 15 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink/Lab sinkwith C.I. brackets and stainless steel plug 40mm including, cutting and making good the walls wherever required. 610x510mm bowl depth 200-450mm. deep(standard make approved by EIC) or as directed |
| 16 | Providing & fixing of following cp, ppr & pvc fitting of standard quality make 15mm nominal dia (Sample to be approved by Competent Authority) |
| 17 | sink mixer with long bend |
| 18 | waste pipe with cp waste |
| 19 | union 25mm |
| 20 | cp grating |
| 21 | union 32mm |
| 22 | floor trap 75mm |
| 23 | male adapter25mm |
| 24 | female adapter 25mm |
| 25 | ball valve 25mm |
| 26 | ball valve 32mm |
| 27 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittingsincluding all fittings & adapters. This includes testing of joints complete as per direction of Engineer incharge.Internal work Concealed fixing the pipe etc. (Sample to be approved by Competent Authority) |
| 28 | 32mm |
| 29 | 25mm |
| 30 | Providing and fixing of PVC (Prince/Finolex/Jindal make) pipe (Type \"B\") in proper gradient in excavated trenches including jointing and refilling the excavated material complete including cost of excavation.75mm |
| 31 | Providing and fixing 16-18mm thick mirror polished, machine cut for floors, kitchenplatform, vanity counters facieses and other similar locations of required size of approved shades, color and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc. including moulding complete at all levels.black/grey/maroon as directed |
| 32 | Providing and fabrication of Almirahs/wall hang type of approved quality 19mm Ply to ply in sides, shelves and wherever required including 12mm ply to plyon back , inside and outside finished with Dulmica sheeting of approved quality including cost of dashfastners/geyserbolts fittings and locks of standard make and including all other necessary accessories complete in all respects. (For payments front face to be measured).45cm deep |
| 33 | Providing and fixing 32 mm thick glazed shutters for windows and clerestory windows . (3.5mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws. Imported wood (including finishing with touchwood polishing ) complete |
| 34 | Structural steel work welded in built up sections, trusses and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / tubes/ channels etc. |
| 35 | Providing & fixing corrugated color coated G.S sheet roofing fixed with nails with bitumen and G.I limpet washers,self drilling screws,complete (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses 0.50 mm TCT |
| 36 | Providing ridges or hips of width 45-60cm over all width colour coated G.I sheet fixed with nails G.I limpet washers complete of required thickness. |
| 37 | Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class Budloo wood. |
| 38 | Providingplain corrugated color coated G.S. sheet panelling roofing fixed with nails with bitumen and G.I limpet washerscomplete (up to a pitch of 60 degree) excluding the cost of purlins rafters and trusses of required thickness as directed by EIC (0.50mm thick) |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but excluding all fittings and the base support for tank (Syntax), or equivalent having valid ISI license) complete |
| 40 | Engagement of labour for various misc works |
| 41 | Providing and fixing tiled False Ceiling of specified materials of size595x595mm in true horizontal level suspended on inter locking metal gridf hot dipped galvanized steel sectionsboth side inclusive ) consisting of main “T” runner with suitably spaced jointsof get required length (minimum) sheet spaced at 1200 mm center to center and cross “T” of size24x25 mm made of 0.30mm thick (minimum) sheet,1200mm long spacedbetween main “T” at 600mm center to center to form a grid of 1200 x600mm and secondary cross “T” of length 600mm andsheet to be interlocked at middle of the1200x600mm panel to form grids of 600x600mm and wall angleand laying false ceiling tiles of approved texture in thegrid including, wherever, required cutting/making, openingforserviceslike diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T”runners to be suspended from ceiling using GI slotted cleatslong dashfasteners, 4mm GI adjustable rodswithgalvanized butterfly level clips as directed by Engineer-in-chargeGI Metal Ceiling Lay in plain Tegular edgetiles of size 595x595 mm |
| 42 | Wall painting with plastic emulsion paint two or more coat) of approved brand and manufacture to give an even shade over a base of plaster of Paris putty (mixed with 2nd class paint of approved quality if required) of 2mm thickness over the plastered surface to prepare the surface even and smooth for painting including applying one coat of priming coat & necessary scrapping wherever necessary |
| 43 | Brick work.Brick work with FPS bricks of class designation 75 in super structure up to all floors. In cement mortar 1cement: 6 fine sand mortar |
| 44 | \"DOOR / WINDOW WORKSDOUBLE/ SINGLE LEAF FLUSH DOOR WITH VISION PANELProviding & fixing of 35mm thick ISI marked Phenol Bonded double/ single leaf flush door as per design of approved make. Job consists of:covereing with 1 mm thick laminate of approved make and colour on both the sides of shutter as per design.Grooves to be filled with grout matching with the color of laminate.The shutter will have a glass vision panel 6mm thick clear float glass of approx. 450 x 200mm on both shutters with necessary deep etching/bevelling, T.W. beading; The shutter shall be finished with 6 mm thick teak wood lipping patti all around the shutter and finished with paint matching the lamination on the teak wood lipping patti;Supply and fixing of 4 nos 100mm x 75mm x 3mm thick SS hinges Door hardware like ss handles long type, door closer etc. shall be included in this item. |
| 45 | ALUMINIUM DOOR FRAMEProviding and fixing of DOOR FRAME SECTION (Jindal or equivalent) aluminium chaukhats with one side rebate.* The frame shall be made up of singel piece extruded rebated customized aluminium section of external size nearest to 110mm x 75mm as per Proprietary manufacturers specifications, 60 micron powder coated in approved shades with nulon/neoprene gaskets etc. complete. * Rate shall include all necessary hardware, repair work, powder coating as/approved shade ,wooden packing in vertical sections* complete in all respects. |
| 46 | Note. The quoted percentage (%age) should preferably be in fractional form in order to minimize concurrence of similar quoted rates |
