Dewas Municipal Corporation has published Tender For Construction Of Pravashan Hall Trus At Chamunda Maa Tekri Dewas. Submission Date for this Tender is 05-07-2023. Building Work Tenders in dewas Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Construction of Pravashan hall trus at chamunda maa tekri dewa |
| 2 | PUF panels for roofs 30mm thick external face 24.14.1/70 7 MP PWD Providing and fixing PUF insulated continuous 2022 corrugated sandwich panels for roofs of total thickness not less than 30 mm made out from continue line method panel shall have pre coated GI sheet on both side of Polyurethane foam with external face being corrugated in shape for GI and PU foam both material. The crest height of the panel shall be of 35 mm minimum with 250mm c/c pitch. The Precoated sheet shall be ofminimum 240mpa steel grade confirming to IS 14245:1995 and shall have zinc coating of 120 gsm as perlS:277, 5-7 microns epoxy primer onboth side of the sheet and polyester top coat 15-18 micron. The PPGI Sheet shall have protective guard film of minimum 25 microns to avoid scratches whiletransportation. The roof panels are laid over a frame work of trusses, columns and purlins fixed using 90 mm self-drilling bolts with rubber washer including all types of flashings. PU Foam must be self-extinguishing. Fire retardant type having minimum density of 40 Kg/ Cum.(+2 Kgs) including 0.25 mm craft paper edging, self- tapping screws of required length and nos. etc. complete as per structural design and direction of Engineer-in- charge. PPGI sheet 0.5mm thick skin on both sides. |
| 3 | Providing and fixing of Bottom and top U track for closing of end joints for cut PUF panels. The U track shall be made out of 1 mm thick pre coated GI sheet. The Precoated sheet shall be of minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS:277: 1992, 5-7 microns epoxyprimer on both side of the sheet andpolyester top coat 15-18 micron. The PPGI Sheet shall have plastic protectiveguard film of minimum 25 microns to avoid scratches during transportation. The U track shall be fixed with suitable POP rivet with wall roof panels and plinth with Expandable fasteners withminimum spacing of 450 mm c/c. The Utrack shall be fixed to RCC Plinth or Tie Beams by suitable anchorFor panel of size of 42mmx30mm with 5mm lipping on both edges. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
