Military Engineer Services-MES has published Tender For Spl Repair Gci Living Barracks At Girl Area , Provn Of Water Tanks And Staging At Dgncc Camp, Drainage System Near Ors Bldg No T-01 Otm Accn And Provn Of Tiling And Window At P-28 Cassel Road Under Ge (East) Delhi Cantt-10. Submission Date for this Tender is 08-07-2023. Barrack Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 21-Jun-2023 | Corrigendum No 01 DE-10 | BOQ | 01-07-2023 |
| 2 | 01-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-07-2023 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm eachcomplete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames)exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed. |
| 3 | S & F Aluminium alloy powder coated windows including aluminum powder coated frames three track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RMdouble revatedand 0.55 Kg for window shutter with one fixed glazed shutter and twonos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring actionand glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed. |
| 4 | S & F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx2.1mm, shutter top section 47.62mm x 44.45mmx1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 kg/RM) incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete. |
| 5 | S & Faluminium alloy powder coated glazed or skelton shutter including frame channel of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to openable frame and channel as directed and as per IS specifications including S & F stainless steel wire cloth as required handles, tower bolt, door closer, locking arrangement Godrej, rubber gasket and door stopper complete. |
| 6 | S&F aluminium alloy powder coatedstandard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of5.5mm thick tinted glass ofsuperior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed. |
| 7 | S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsincluding dismantling of existing AC sheet corrugated or semi corrugated as in roof coverings complete all as specified and as directed. |
| 8 | S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC sheet corrugated, semi corrugated or plain as in roof coverings complete. |
| 9 | M & L 4mm thick desginer ceiling board ( Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm andspaced at 1.2m c/csecurelyfixedtothe structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionandincluding dismantling of walls and celing existing false ceiling with frame complete all as specified and directed. |
| 10 | M & Lfor 18/20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed in CM 1:4 includingrounding to edge of granite as per requiredand dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete. |
| 11 | M & L Vitrified ceramic tileslight shade 10mm thick (square/rectangular) area of each tile notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 and dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete. |
| 12 | M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc, setand jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 and dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified anddirected. |
| 13 | M & L Coloured Glazed ceramic tiles in vertical surface600 x 300 x 7-8 mmthick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick renderingin CM 1:4 and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified anddirected. |
| 14 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete. |
| 15 | M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough toreceive plaster all as specified and directed. |
| 16 | M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete. |
| 17 | M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 18 | M & L for RCC M25 Design Mix using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed. |
| 19 | Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the existing surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: Smart Care Damp Proof of Asian Paints or equivalent in Berger/Nerolac. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a periodof Eight yearsin favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 20 | S & Ftubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed. |
| 21 | S & Ftubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed. |
| 22 | S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. |
| 23 | S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel headscrewed for iron pipe of 15 mm bore complete all as specified and directed. |
| 24 | S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower with shower arm (600mm long) andsuitable for 15mm bore GI pipe includingthree joints to steel pipes or unions and plugging andscrewing to walls, completeall as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP or equivalent in Kohler/Marc. |
| 25 | S & F in repairs Brass CP basin mixercentral hole, for mixing hot and cold water fixed as per manufacture"s manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP or equivalent in Kohler/Marc. |
| 26 | S & F Vitreous china wash basin counter ovaltype size 600x425x195mm,fixed in repairs, undergranite slab with all fitting and fixture, complete all as specified and as directed. |
| 27 | S & F in repairsAngle valve of CP high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) |
| 28 | S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 29 | S & F in repairs Vitreous china floor mounted WC( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, health faucet flushing cistern, with P or S trapwith all fitting and fixturecomplete all as specified and as directed complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware). |
| 30 | S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler) |
| 31 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete. (Make: Jaquar/Marc/Kohler) |
| 32 | S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. |
| 33 | S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed. |
| 34 | S & F Stainless steel Gratingdome125mm dia with or without hole for waste pipe, fixed in repairs, complete. |
| 35 | S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) |
| 36 | S & F in repairs PVC (SWR) Floor/Nahani trap, plaindia of outlet 125mm, complete all as specified and as directed. |
| 37 | S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. |
| 38 | Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 39 | M & L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed. |
| 40 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position complete all as specified and as directed. |
| 41 | S & F in repairs 100mm bore Sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed. |
| 42 | S & F in repairs 100mm bore Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 43 | S & F 100mm dia Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 44 | S & F100mm bore cast iron cowls complete all as specified and as directed. |
| 45 | M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 46 | M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid dry in floor/path incl demolition of existing flooring or tiles of any type of any size complete all as specified and as directed. |
| 47 | M & L for Pre-polished,coloured chequered cement concrete tiles, factory made, Premium quality250mm x 250mm x 20-22mm thick,set &jointed in neat cement slurry and pointed flush with grey cement andpigments to match colour of tiles in floors/path etcover 20 mm thick screed bed in cement mortar 1:6, including dismantling of exisiting chequred Concrete tiles of any type with bedding layer, complete all as specified and as directed. |
| 48 | Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified. |
| 49 | M & L for Brick work with sub class "B" bricks of old size, straight or curved on plan to any radious built in CM 1:6complete all as specified. |
| 50 | Taking down cement or cement lime plaster , any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 51 | M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair without using extra cement in any position incl scafolding etc, complete all as specified and as directed. |
| 52 | M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair without using extra cement in any position incl scafolding etc, complete all as specified. |
| 53 | M & L for Preparation of newly plastered internal surfaces of walls/ceilings and applying 2mm thick Birla White/J K White wall care putty, again sand papering to make surfaces smooth andapplyingTwo coats of Oil Bound Distemper over a coat of wall primer, complete all as specified and as directed. |
| 54 | M & L for Preparation of newly plastered external surfaces of walls upto 4 storied buildings and applying 2mm thick Birla White/J K White wall care putty, again sand papering to make surfaces smooth andapplyinggTwo coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over a coat of wall primer, complete all as specified and as directed. |
| 55 | M & L for preparation of plasteredor unplastered olddecorated surfaces of walls including brooming down or scraping downwith steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treadingoil and greasy spots, filling the cracks, holes with putty and applying One coat of Oil bound distemper complete. |
| 56 | M & L for preparation of plasteredor unplastered olddecorated surfaces of walls including brooming down or scraping downwith steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treadingoil and greasy spots, filling the cracks, holes with Putty and applying One coat of exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete. |
| 57 | Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed. |
| 58 | Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed. |
| 59 | Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed. |
| 60 | M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed. |
| 61 | Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed. |
| 62 | M & L for 150 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with coller complete laid in trenchesand testedcomplete all as specified and as directed. |
| 63 | M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 150 mm bore incl forming cradles complte all as specified and directed. |
| 64 | M&L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as incopings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed. |
| 65 | Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed. |
| 66 | S & F for Angle Iron sections as in roof trusses (framed), Tank Staging/platform trussed purlins, rafters, standing poles, crane gantries, rails and fastenings and heavy brackets framing including distance pieces, cleats etc., conformingto Fe-410W Gde E- 250 quality A, complete all as specifiedand as directed. |
| 67 | S & F Mild steel, plain, black sheet 1.60mm thick in Tank staging/platform, wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. |
| 68 | M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 69 | M & L for Hard core of gauge exc 63mm butnot exc 100mm deposited spread and leveling in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 70 | M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to newsteel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 71 | S & F Tripple layered 2000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia brass float valve and ball complete all as specified. |
| 72 | S & F for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete. |
| 73 | S & F 20mm dia GI tubbing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scafolding, cutting chases in wall whereever required making good to match with original surface complete, all as specified. |
| 74 | M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete. |
| 75 | M & L for Brick work with sub class "B" bricks of old size, straight or curved on plan to any radious built in CM 1:4complete all as specified. |
| 76 | M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid dry in floor/pathcomplete all as specified and as directed. |
| 77 | S & F for Precast RCC manhole covers 75 mm thick medium duty including handles embeded conforming to IS-12592,complete all as specified and as directed . |
| 78 | M&L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete. |
| 79 | M & L for 450 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenchesand testedcomplete all as specified and as directed. |
| 80 | M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 450 mm bore incl forming cradles complete all as specified and directed. |
| 81 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , incl.Brushing neat cement slurry with 3.0 Kg of cement per sq. metre |
| 82 | All same as per srl item No 11 here-in-before but except dismantaling of tiles. |
| 83 | Taking down shutter and refixing in same opening after easing and adjusting, area of shutter exc 1 sqm but nexc 2 sqm eachcomplete all as spd |
| 84 | All same as per srl item No 13 here-in-before but size 450 x 300 x 7mm. |
| 85 | S&F in repairs CP brass WHB mixer for mixing hot & Coldwater screwed down for iron pipe 15mm bore complete all as specified and directed. (Make : Jaquar /Marc/Kohler) |
| 86 | S&F in repairs CP brass wall mixer 3 in 1 incl hand shower and wall shower (having leg/bend/arrangement for connection to shower) for mixing hot & Coldwater screwed down for iron pipe 15mm bore complete all as specified and directed. (Make : Jaquar /Marc/Kohler) |
| 87 | S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white, complete all as specified and directed. |
| 88 | Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 89 | S&F in repair 10ltrs PVC valveless, syphonic ac-tion type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 90 | S&F PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed. |
| 91 | S&F in repair vitreous china wash basin, white , flat back , size 550 x400mmexcluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 92 | Supply only waste fitting 32mm dia , CP for WHB with long screwedshunks and nuts complete all as spd and directed |
| 93 | S&F in repairsheet glass shelf assembly consisting of 5.5mm thk sheet glassshelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed. |
| 94 | S&F in repair 15mm bore 2 way bib tap chromium plated brass with flange complete all as spd & directed |
| 95 | S&F in repair cornerglass shelf 225x225mm radius consisting of 5.5mm thk sheet glass with CP brass brackets with 02 Nos of CP railing in each set complete all as spd. |
| 96 | S&FCP health faucet with 1.00mtr long CP flexible pipe as per approved samplecomplete all as spd and directed (Make : Jaquar /Marc/Kohler) |
| 97 | S&F in repair CP brass towel ring round with round flange fixed with screw to wall complete. (Make : Jaquar /Marc/Kohler) |
| 98 | S&F looking mirror size 600x450mm bevelled edges miror of selected quality glass mounted of 6mm thk AC building board or commercial plywoodand fixed to woodenplug with CP brass screws and cup washers complete. |
| 99 | S&F in repair 15mm bore angle stop valve chromium plated brass with flange complete all as spd & directed |
| 100 | S&Fin repairCP , tubular towel rail60cm longfixed with and including CP brass screws and wooden /plastic cleats complete |
| 101 | S&F grating doom 100mm dia of PTMT complete. |
| 102 | S&F and fabrication of wardrobe/ cup board, kitchen cabinet, shelves etc madeup of 18mm HDHMR board (century/action tesa/Kitply) with both side company pasted lamination (any colour) duly lipping (edge bending) on exposed surfaces with soft closing hinges to shutters as required complete. |
| 103 | S&F Stainless steel Cutlary basketof size 370mm x 485mm x 100mm made ofmin 4mm dia stainless steel wireand bottom of S S perforated sheet approved quality withsuitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two wayextruded MS galvanised over rollers as approved by Engr-in-Charge. ( Make: Godrej Cat part no 6132 or equivalent approved by Engr-in-Charge” |
| 104 | S&F Stainless steel thalibasket of size 370mm x 485mm x 200mm made of min 4mm dia stainless steel wire of approved qualitywith suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two wayextruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent approved by Engr-in-Charge.) |
| 105 | S&F Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mm dia stainless steel wire approved qualitywith suitable arrangement for fixing telescopic basket over and including telescopic channel 18 inches/20inches in length two wayextruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6121 or equivalent approved by Engr-in-Charge) |
| 106 | S&F in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size overall size 915mmx 460mm bowl size 410 mmx 330 mmx 160mmcomplete all as specified and directed.Make- Maharaja/Nirali/Prayag |
| 107 | S&F in repair stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement complete. Make- Maharaja/Nirali/Prayag |
| 108 | All as per Srl item No 1 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr |
| 109 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete as specified and directed |
| 110 | S &F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 111 | S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed |
| 112 | S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as spd and directed. |
| 113 | S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc complete all as specified. |
| 114 | S&F powder coated three track aluminium (glazed/ gauged) window shutterssliding type without AC opening incl 3mm thick glass or stainless steel wiremesh, without sash bar aluminium section weighting 0.55 Kg per mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws includingframe/fittingscomplete all as per direction of Engr-in-charge. Note : The work will be also executed at High rise bldgs and necessary T&P, scaffoling is included in Quoted rates. |
| 115 | S&F for Mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including cutting etc complete all as specified. |
| 116 | M&L for Cement concrete in foundations, filling and mass concrete Type B2 1:2:4( 40 mm graded aggregate). |
| 117 | S&F pre-painted galvanized aluminium zink coating GI based corrugated steel sheeting 0.50 thk of any colour having tensile strength 550Mpa as in roofing fixed with self tapping screwsas specified |
| 118 | M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregae) as in foundation , filling and mass concrete and bed to drain, manholes complete all as specified |
| 119 | M & L for Machine pressed rubber moulded vibro compacted precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment over 25 mm thick sand coushioning complete all as specified. |
| 120 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe .290.Gde-E-165 complete all as specified. |
| 121 | Taking down carefully old unserviceable copper/aluminium point wiring in conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket etcand making good the disturbed surface of wall / floor/ ceiling etc as original complete all as directed. |
| 122 | M&Lfor point wiring complete with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked through & including PVCconduit medium grade with all fittings with FRLS, PVC insulated unsheathed 1.5 Sqmmmultistranded copper earth wire, connecting to common earth dolly with and incl new Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc , with and including Modular cover plates of suitable size inand and making good surface as originalcomplete all as directed for the following. |
| 123 | One light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push. |
| 124 | One socket outlet point 5 amps on the same board. |
| 125 | One socket outlet point 5 amps on the independent board. |
| 126 | All as per srl item No. 122 here-in-before but with 2.5 sq mmFRLS copper wire with 2.5 Sqmm FRLS copper earth wire |
| 127 | S&Fof Modular switch 6 Amp, 1 way, 1module size complete all as directed. |
| 128 | S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed. |
| 129 | S&F of Modular switch 16 Amp, 1 way, 1 module size complete all as directed. |
| 130 | S&F of Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed. |
| 131 | S&Fof Modular Fan regulator step type, 120 watts, 2 Module size complete all as directed. |
| 132 | S&Fof Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed. |
| 133 | Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed. |
| 134 | Supply and fixingin replacement of LED tube light fitting, 20 watt.with and including all electric connections complete all as specified and as directed. |
| 135 | Supply and fixing in replacementof LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 136 | Supply and fixing in replacementofsecurity light fitting bracket, 1 mtr long made out of galvanized iron pipe of 25 mm dia size light grade bent to shape complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as specified and directed. |
| 137 | Supply and fixing ceiling fans complete with blades, down rods, electronicand accessories, 230 V, 1200 mm sweep with service value not less than 6.00 BEE. Five star rated with brushless direct current motor (BLDC).complete all as specified and as directed and depositing the old u/s to DGNCC store yard. |
| 138 | Supply and fixing for PVC ventilatiing fan 200mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed. |
| 139 | S&F of Geyser 25 litre (FIVE STAR RATED) capacity vertical type with steel tank and glass inner linen complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock and depositing the old u/s to DGNCC store yard. complete all as specifed and as directed |
| 140 | Supply and fixing in replacement of Distribution Boarddouble Doormade out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed. |
| 141 | Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed. |
| 142 | Supply and fixing in replacement of isolator63Amp, SPN type with over load and short circuit protection complete all as directed. |
| 143 | Supply and fixing in replacement ofModular AC Socket with 25 Amps SPmini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed. |
| 144 | Supply and fix Industrial Switchgear Busbar Chambers, current rating 63 Amps, 4 Way with 04 Nos copper busbar complete all as specified and as directed. |
| 145 | Material and labour in replacement for Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed multistranded copper conductor cable ISI marked, drawn in to and including 20mm dia PVC conduit medium grade with all fittings and including 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble .complete all as specified and as directed. |
| 146 | Material and labour in replacement for Sub main wiring with 2 run of 10Sqmm (nominal area) FR, PVC insulated, unsheathed multistranded copper conductor cable ISI marked, drawn in to and including 20mm dia PVC conduit medium grade with all fittings and including 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble .complete all as specified and as directed. |
| 147 | Material and labour in replacement ofLT underground cable XLPE insulated, PVC Sheathedarmoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 core ISI markedincludingall connectionswith thimbles of suitable size,complete all as directed. |
| 148 | M&L for sand cushioning to under ground cable provided with layers of snad (8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directedat site by Engineer-in-Charge. |
| 149 | Supply and layingburnt bricks class - B for protection of cable complete all asspecified and directed at site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
