Military Engineer Services-MES has published Tender For Repair/Replacement Of Roof, Ac Sheet, False Ceiling, Connected Work And Periodical Services For Md Accn Under Age B/R-I At Itarana Cantt Alwar. Submission Date for this Tender is 20-06-2023. False Celing Tenders in alwar Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed. |
| 2 | Dismantling asbestos cement corrugated or semi corrugated in Roof covering any type complete all as directed. |
| 3 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coveringscomplete all as directed. |
| 4 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 6 | Dismantling of wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as directed. |
| 7 | Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing the domolished material out side of defence land all as specifed and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed. |
| 9 | Demolition of Brickwork or stone/boulder masonry, built in cementmortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles |
| 10 | M&L brick work with sub class "B" fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 11 | S&F steel work in tubular section for purlin,rafters,post etc including special shaped washer etc. complete using induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240. |
| 12 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc gde Fe-410 W (Gde E- 250) quality A complete all as directed. |
| 13 | M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as directed. |
| 14 | M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, andeves board fixed with self tapping screws complete all as directed. |
| 15 | S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type orJ-type or cranked hook bolts complete all as directed. |
| 16 | S&F 9mm thick of size 600mm x 600mm HSPC (high steampressure cured) Pre-primetered self embossed, textured designer boardto be fixed & including make armstrong GI based powder coated snap grid/section size 600mm x 600mm with main runner 38mm x 24mm x 0.9mm thick, cross tee 28.6mm x 24mm x 0.9mm and wall angle 19mm x 19mm x 0.9mmduly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper with preparation of sufaces etc complete all as specified. |
| 17 | M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed. |
| 18 | M&L coloured joint free non skid ceramic tiles7 to 8mm thick area of each tile exceeding 0.18Sqm but not exceeding 0.36 Sqm,as in floors etc, laid over with and including 15mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 19 | All as per item No 18.00 above but in skirting over with and including 10 mm thick plaster in cement mortar 1:4 including necessary cutting of tiles as required size all as specified and as directed. |
| 20 | M&L coloured non skid ceramic tiles (1st quality) 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc, laid over with and including 15mm thick screed bed of cement & sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 21 | All as per item No 20.00 above but in skirting over with and including 10mm thick plaster in CM 1:6 including necessary cutting of tiles as required size all as specified and as directed. |
| 22 | M&L coloured non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc, laid over with and including 15mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 23 | M&L glazed ceramic coloured tiles(Ist quality) in vertical surface 450mm x 300mm x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick rendering in CM 1:4complete allas specified and directed. |
| 24 | M&L providingcement concrete as in coping PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate), with & including necessary form work Complete all as specified and as directed. |
| 25 | M&L 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with bituminous mastic filling including necessary form work complete all as specified and directed. |
| 26 | S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed. |
| 27 | Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3.(iii) M&L water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (WPC will be measured and paid seperately). (iv) M&L for applyin evenlytwo coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces.(v) M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) etc. (vi) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick. (WPC will be measured and paid separately.) on top.(vii) M&L for plastering in CM 1:4, 15 mm thickwith water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair.(WPC will be measured and paid seperately) (screed bed to receive. Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontalflat area to be measered. |
| 28 | M&L 15mm thick rendering in cement mortar 1:4 on fair faces of stone/brick masonry,or concrete surfaces, finished with even and smooth complete all as specified and directed. |
| 29 | M&L rendering 15mm thick other than fair faces of stone/brick masonry in cement mortar 1:6 on fair faces of stone masonryor concrete surfaces finishedeven and smooth without using extra cement all as specified and as directed. |
| 30 | M&L rendering 5 mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L rough cast plaster on exterior wallsapplying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse aggregate sand and cement in the ratio of 1:1:1 shall be applied and finished even.The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered completeall as specified and directed. |
| 32 | Extra over rendering or plastering forwork in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth, including cutting to edges, all mitres and stopped end, etc complete all as specified and directed. |
| 33 | M&L taking down and removal of loose/ditegrated old concrete plaster and applying 3mm thick bonding coat of modified styrene butadiene emulsion (SBR Bonding agent i.e Nitobond SBR 45) in proportion 1(Nitobond SBR 45) : 1(Water) : 3 (OPC) by volume with the brushes etc to bind New cement plaster/polymer Modified Plaster/ concrete/ Screed concrete with old surface etc complete. |
| 34 | M&L applying 15 mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45) in proprotion 1:3 by weight 5 Litres Nit bond SBR 45 to added to 50 Kg cement with 13 Litre water addition, finished surface to match with existing adjoining surface of ceiling, Beams and like complete. |
| 35 | M&L rendering 20mm thick polymer cement mortar 1:3 prepared with latex SBR by the weight of cement concrete surface incl. Finishing the surface even and smooth without using extra cement. Make Liquid of M/S choksey/STP/Sika/Pidilite as approved by GE.Note:- Exact qty and application process of chemical is strictly as per manufature"s guidelines. |
| 36 | M&L water proofing treatment by the water proofing liquid of Tech force 2K strong of choksey or equivalent of Dr Fixit/Fosroc after proper cleaning of the new surface free of dust and applying the first coat (By brush nly) @4-4.5 Sqm/Lit, allowing it to dry for 24 hrs and applying the second coat over it on horizontal and vertical surface all as specified and directed. Note:- Application shall be carried out through authorised applicator of manufactureer only and as per guidelines of manufacturere strictly. Each stage shall be passed by the Engr-In-Charge/GE before laying further coat. Note:-Sunshield 100 of M/S Choksey or fosroc/ST/Pidilite/Sika as approved by GE. |
| 37 | M&L cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 Kg/Sqm conforming to IS : 3384 and applying a layer of APP based polymeric membrane not less than 3mm thick weighing not less than 3.50 Kg/Sqm, reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) and upper side of membrane thermally insulated with white gravel finish uniformly embedded during manufacturing process. It shall be laid by torch application having side over lap 75 mm and at the end 100 mm, all overlaps and joints shall be sealed by torch application. For parapet, membrane shall be taken to a height of minimum 60 cm and inserted inside the parapet in a groove to a depth of 65 mm. The same shall be finished by a membrane flashing.Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates. |
| 38 | Dismantling water tanks capacityexc. 500 & n.exc 1000 Litres of any description complete all as specified and directed. |
| 39 | S&F rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed. |
| 40 | Disconnecting existing tanks exc 500 Ltr n.exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc measured separately) all as specified and directed. |
| 41 | S&F in repair 20mm bore Ballvalves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified. Make- Prayag or equivalent as approved by GE(Minimum wt 455 gms) all as specified and directed. |
| 42 | S&F in repair 20mm bore Gun Metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed. |
| 43 | S&F in repair bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 44 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 45 | S&F in repair stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 46 | S&F in repair 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 47 | S&F in repair brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed. |
| 48 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 49 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed. |
| 50 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed. |
| 51 | S&F 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed. |
| 52 | S&F 20mm diasteel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed. |
| 53 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete as specified and directed. |
| 54 | S&F in repair vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. |
| 55 | S&F in repair vitreous china squatting pan, "orissa" pattern, size 580mm x 440mm, white with integral foot rest and "P" or "S" trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed. |
| 56 | S&F in repair vitreous china wash basin white flat back, size 450mm x 300mm, including brackets cutting for and pinning in ends of brackets or erecting stand including waste fitting, brass chromium plated 32mm size with long screwed shocks andfly nut, flange end bedded in red lead cement and othe end fixed complete all as specified and directed. |
| 57 | S&F in repair vitreous china urinals,half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and Union for discharge pipe incl CP 40mm waste coupling and PVC 40mm waste pipe 900mm long. |
| 58 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 59 | S&F in repairs Pillar taps,15 mm borecast copper alloy, fancy type, chromium plated, with capstan heads,screwed down high pressure complete all as specified and directed. |
| 60 | M&L 16-18mm thick Granite (of any type) work for wall lining/urinal partition etc, (veneering towall) 12mm thickin cementmortar (1:3) and pointing with white cement (1:2)using marble dust with admixtureof pigment to match with shade of granite andincluding 10mm thick rendering incement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite compltee all as specified. |
| 61 | S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors including dismantling existing pipe of any description all as specified and directed. |
| 62 | S&F PVC (SWR) bends 110mm dia any radius all as specified and directed. |
| 63 | S&F PVC (SWR) junction single(Single T) equal or unequal with access door 110mm dia all as specified and directed. |
| 64 | S&F PVC (SWR) reducers 110mm x 75mm dia all as specified and directed. |
| 65 | S&F PVC (SWR) Vent cowl 75mm dia all as specified and directed. |
| 66 | S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floorsincluding dismantling existing pipe of any description all as specified and directed. |
| 67 | S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25mm x 3mm including dismantling existing pipe of any description all as specified and directed. |
| 68 | S&F PVC (SWR) bends 75mm dia any radius all as specified and directed. |
| 69 | S&F110mm PVC (SWR) WC connector bent type all as specified and as directed. |
| 70 | M&L applying two coats of synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation all as specified and directed. |
| 71 | M&L one coat of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation. |
| 72 | Complete removal of existing treatment and preparation of surface of wall, washing,rubbing down and stopping of distempered and painted surface, incl applying two coat wallcare putty 2mm thick for smooth finished of the surface and applying two coat of oil bound distemper all as specified and directed. |
| 73 | M&L preparing newly plastered surfaces and applying two coats of oil bound distemperon walls over one coat of 1mm thick wall care putty complete all as specified and directed. |
| 74 | M&L preparing newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed. |
| 75 | M&L preparing newly plastered surfaces and applying three coats of white wash on ceiling/soffits of chajjas complete all as specified and directed. |
| 76 | M&L preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of water primer complete as specified and directed. |
| 77 | M&L preparation of old surfaces by washing rubbing down and stopping of plasteredsurfaces and applying two coats of Cement based paint white or tined on walls including cornices etc complete all as specified and directed. |
| 78 | M&L brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of white wash complete all as specified and as directed. |
| 79 | All as per description of item No. 78.00 here-in-above but on ceiling surfaces. |
| 80 | M&L brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of colour wash complete all as specified and as directed. |
| 81 | M&L brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and as directed. |
| 82 | M&L complete removal washing, rubbing down and stopping ofold decorateddistempered and painted surfaces of walls, plastered or unplastered including cornices, plasters etc and applying two coats of oil bound distemper of approved shade/tint complete all as specified and as directed. |
| 83 | M&L preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and as directed. |
| 84 | M&L preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed. |
| 85 | M&L preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and as directed. |
| 86 | M&L complete removal, washing, rubbing down and stopping of old decorated surfaces and painted surfaces of walls ,plastered or unplastered including cornices plasters etc and applying two coats of plastic emulsion paint over a coat of priming paint of approved shade/tint complete all as specified and as directed. |
| 87 | M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of acrylic emulsion paint (exterior grade)of approved shade/tint over a coat of primer over and inclucluding 1mm thick Birla white wall care putty complete all as specified and as directed. |
| 88 | M&L preparation of old plastered/concrete surfaces and applying one coat of synthetic enamel paint of approved shade/tint. complete all as specified and as directed. |
| 89 | M&L writing letters or figures (Block, Roman, Italic or Indian) n. exc 30 cm height with thick synthetic enamel paint. complete all as specified and as directed. |
| 90 | M&L complete removing of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of oil bound distemper of approved shade/tint over a coat of primer over and inclucluding 1 mm thick Birla white wall care putty complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
