Public Works Department-PWD has published Tender For Construction Of Auditorium At Government Degree College Doda (Phase-I) By Way Of Sanitary Fittings.. Submission Date for this Tender is 23-06-2023. Auditorium Construction Tenders in doda Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge in all kind of soil. |
| 2 | Extra for every additional lift of 1.5 M or part therefore in all kinds of soil. |
| 3 | Earthwork in excavation by manual means in trenches for foundation, drain, pipes, cables etc.(not exceeding 1.5m width) for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5m including disposal of excavated earth upto 50 M from cutting edge, disposed earth is to be levelled and neatly dressed in all kind of soils. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed. |
| 5 | Providing and laying in position 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Centring and shuttering incl. Strutting propping etc. and removal of form workfor:- |
| 9 | Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 11 | Suspended floors, roofs, landings, balconies and access platforms. |
| 12 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 14 | Steel work welded in built-up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladders, railings, brackets, gates and similar work. |
| 15 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 16 | Providing & fixing of white vitreous China pedestial type water closet (European Type) with cistern (A/PHAS-100 Cat No. 201100+Cat No. 21054 / Kerovit model No. 112 and flush tank model no. 1001) with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover with CP hinges & rubber buffers, CP brass screw, washer with all accessories with WC connector with Rubber Lip / Buffer and side gap filled with silicon sealant wherever required. Including brass / SS screws and washer complete including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-in-charge. |
| 17 | Providing and fixing water closet squatting pan (Indian Type W.C Pan) with 100mm sand cost iron P or S trap, 10 ltrs low lewel PVC flushing cistern including flush pipe (Hindware make Cat No. 20070/ Kerovit make Cat No. 606) Manually controlled device (Handle lever) conforming to IS : 7231, with all fitting and fixture complete including cutting and making good the wall and floows wherever required. Orissa Pan white viterous china pan of size 580x440mm with integral type footrests. |
| 18 | Providing and fixing complete set of sanitary fixtures for handicapped toilets, Hindware Cat. no. 70002) comprising of EWC - P , Cistern, Seat Cover, Twin Flush Fittings, Wash Basin 450x300, Half pedestal, 1 faucet with spatula lever, 1 hinged rail and 2 grab bars, including cutting and making good the walls and floors wherever required complete as per directions of Engineer in charge. |
| 19 | Providing & fixing of white vitreous china wash basin with pedestal (Hindware Cat No. 1008 + Ped Cat No. 11003 / Kerovit model No. 234 Ped Model no. 305)with CP brass waste assembly, CP cast brass bottle trap with extension piece ( Parko1535 or approved equivalent), 450mm long CP copper connections pipes ( Parko 1535 or approved equivalent), wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-Incharge. |
| 20 | Providing & fixing of white vitreous china under counter oval wash basin/circular basin (Hindware 10080 / Kerovit model No. 206 & 207)with CP brass waste assembly, CP cast brass bottle trap with extension piece (Jaquar Cat No. 769B + Parko1535, KA870001 or approved equivalent), 450mm long CP copper connections pipes (Jaquar Cat No. 803B or Parko 1535 or approved equivalent), wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-Incharge. |
| 21 | Providing & fixing white vitreous china flat back urinal with automatic flushing systems (Hindware 60021 / Kerovit model No. KS 510) comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells, eyes electrically operated solenoid valve, step down transformer / equipment and any other item required to provide satisfactory functioning including necessary wall cutting / chasing and making good, as required for urinal flushing complete as mentioned above as per direction of Engineer-Incharge. |
| 22 | Providing and fixing of C.P. brassCentral Hole Basin Mixer/ Table top Mixer without Popup Waste System including with 450mm Long Copper Pipes & Brass Nuts with all fittings and accessories as per direction of Engineer-Incharge. (Jaquar CQT 23167 D / Kerovit make Cat No. 1511010-ND-CP). |
| 23 | P/F of regular body concealed stop cock suitable for 15mm pipe line with protection cap (Jaquar Cat No. ALD 083 / Kerovit make Cat No. KB 111030 CP and exposed part Cat No. KB 1511032) with exposed part angular stop cock with flange FUS 29.53. |
| 24 | Providing & fixing C.P. hand spray with lever control (health faucet) (Jaquar Cat. No. ALDCHR-565 / Kerovit make KA580001)and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects as per direction of Engineer-Incharge. |
| 25 | Providing and fixing C.P. brass Nipple for all acessorie points of approved quality(Make . |
| 26 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore (Make Jaquar CQT 23059 / Kerovit make Cat No. KB 1511003). |
| 27 | Providing & fixing recessed liquid soap dispenser (Jaquar Cat No. ACN 1135N Kerovit Cat No. 930009) as per direction of Engineer-Incharge. |
| 28 | P/F of Soap Dish Holder with all fittings as per direction of Engineer-in-charge (Jaquar Cat No. ACN 113 N Kerovit Cat No KA 680004). |
| 29 | Providing and fixing Bottle Trap (Jaquar Cat No. ALD. 769L) and other ancillary fittings. Cutting and making good the walls wherever required compete as per directions of Engineer-Incharge. |
| 30 | Providing and fixing 6mm copper backed float glass mirror MODI / SAINT-GOBAIN including 6mm thick BWR type ply board, 40mm stainless steel channel plugged to wall, hard wood treated with two coats of wood preservative, etc. all complete as specified and shown in drawing complete to the satisfaction of Engineer in charge. |
| 31 | Providing and fixing brass towel Ring Round with Round Flenge of approved make complete with all fittings (Jaquar Cat No. ACN 11021 BN). |
| 32 | P/F of glass shelf 600mm long with all C.P fittings of approved quality complete item (Jaquar Cat No., CAN 11071 N Kerovit Cat No KA 930005). |
| 33 | Providing and fixing 15 mm dia. C.P. brassbib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (Short Body) (Make Jaquar Cat No. CQT-23047 Kerovit Cat No. KB 2011004) |
| 34 | Providing and fixing heavy class SS grating plane floor trap and setting in floor with cement mortar to matach the floor finish as per direction of Engineer-in-charge (size 100mm dia) ISI marked. |
| 35 | Providing & fixing storage type water cooler with plain & cold water facility of the following capacity, I.S.I marked, stainless steel front panel, C.P brass push cock, inlet float valve with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required (Blue Star or equivalent). Cooling capacity 40 Lts./hr(Model No. Bluestar PC480) |
| 36 | Providing & fixing commercial 10 LPH water purifier of required capacity. Including all components as per manufacture specifications, including connection from water supply line, and final connection to water cooler electric wiring & plug top etc. with all accessories. |
| 37 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: |
| 38 | Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. |
| 39 | Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
| 40 | Providing and fixing of Polyethylene/Aluminium/Polyethylene (PE-AL-PE)Composite Pipes as per IAPMO IGC- INDIA 308, UMC-1TM certification marked on the pipe at the interval not greater than 1 meter with nominal pipe size with manufacturer’s name or trade mark including all relevant DZR brass fittings as Female Elbows/Tees, MTC /FTC and Engineering plastic fittings with internal sealing system like Eq. elbows, Eq. tees, reducers, Straight couplers Connectors, clamps at one meter spacing, with PAP valves etc. Make Kitec , Maithilee and Vista. Concealed installation including cutting chases and making good in the wall etc, Complete in all respect.(Internal Work) |
| 41 | 1216 (16mm OD) pipe. |
| 42 | 1620 (20mm OD) pipe. |
| 43 | Providing and fixing Polyethelene-Aluminium–Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IAPMO-IGC-INDIA 308. U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstandtemperature upto 80 0C, including all special fittings of composite material (engineering plastic blend and and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connector etc. with trenching, refilling and testing of joints complete as per direction of the Engineer-in-charge. External work. |
| 44 | 1216 (16mm OD) pipe. |
| 45 | 1620 (20mm OD) pipe. |
| 46 | 2025 (25mm OP) pipe. |
| 47 | 2532 (32mm OP) pipe. |
| 48 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete copatable to connection with composite pipemake :Rehau / Kitech/gebbrat ) |
| 49 | 15 mm nominal bore |
| 50 | 20 mm nominal bore |
| 51 | 25 mm nominal bore |
| 52 | Providing and fixing gun metal gatevalve with C.I wheel of approved quality (Screwed ended)make :Rehau / Kitech/gebbrat ) |
| 53 | 20 mm dia. Nominal bore |
| 54 | 25 mm dia. Nominal bore |
| 55 | 32 mm dia. Nominal bore |
| 56 | Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.:(C-Class) INTERNAL WORK-Exposed on wall |
| 57 | 15 mm dia. nominal bore (Medium) |
| 58 | 20 mm dia. nominal bore (Medium) |
| 59 | 25 mm dia. nominal bore (Medium) |
| 60 | 32 mm dia. nominal bore (Medium) |
| 61 | Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc.(:External work) |
| 62 | 15 mm dia. nominal bore (Medium) |
| 63 | 20 mm dia. nominal bore(Medium) |
| 64 | 25 mm dia. nominal bore(Medium) |
| 65 | 32 mm dia. nominal bore(Medium) |
| 66 | BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified |
| 67 | 15mm dia. |
| 68 | 20mm dia. |
| 69 | 25mm dia. |
| 70 | 32mm dia. |
| 71 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 72 | Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm. |
| 73 | 15 mm dia |
| 74 | 20 mm dia |
| 75 | Providing and fixing in position of approved quality high pressure rated Brass Float Valve with copper ball float and brass rods of required length suitable fortest pressure of not less than 15 Kg/sqcm of the following sizes: |
| 76 | 25 mm dia |
| 77 | 32 mm dia |
| 78 | Earthwork in all kinds of soil excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed. |
| 79 | Providing and fixing un-plasticised PVC pipe clips of approved design to un-plasticised un-plasticised rain water pipes by mean of 50X50X50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 80 | 75MMpipe |
| 81 | 110MMpipe |
| 82 | 160MMpipe |
| 83 | Construction brick measonery man hole in cement motor 1:4 (1 cement: 4 Coarse Sand) R.C.C top slab with 1:2:4 mix (1 cement: 2 Coarse Sand: 4 graded stone aggrigate 20 mm nominal size) foundation concrete aggrigate 40 mm Nominal Size, in side palstering 12mm thick with cement mortor 1:3 (1 cement:3 Coarse sand) finshed with floating coat near cement and making channels in cement concrete 1:2:4 (1 cement:2 Coarse snad:4 graded stone aggirgate 20mm nominal size) finished with floating coat of neat cement complete as per standard design. inside size 90cmx80cm and 45cm deep including cast iron cover with frame (light duty) 455x610mm internal dimensionals. total wt. of cover and frame to be not less than 38kg (wt. of cover 33kg and wt.of frame 15kg) with F.P.S bricks of class designation 75 (crush stone aggrigate) |
| 84 | Constructing masonry Chamber 60 x 60 x 75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chain lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. (With F.P.S. bricks) |
| 85 | Providing murum bedding below pipeline and filling on the top of the pipeline with selected material in 15 to 20 cm layers including watering ramming etc. complete. With selected earth available from excavation. |
| 86 | Providing and fixing Heavy class SS grating with Cockroach proof SS strainer of approved design including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge.(Size 100 mm dia) (ISI Marked) |
| 87 | Providing and fixing heavy class SS grating plane including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge (Size 100 mm dia) (ISI Marked) |
| 88 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license) (1000 ltr. Capacity 15 No.). |
| 89 | Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks. |
| 90 | Supply, assembly, erection, testing and commissioning of pumping system comprising the following: Vertical/ Horizontal centrifugal pumps (1 Working + 1 Stand-by) with mechanical seal, SS Volute casing and SS impeller connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, 3 phase, 50 cycles A.C. supply with 50/100 mm dia. pressure gaugesincluding MS skid and mounting of the pumps on the skid. (Motor to be of the same make as the pump) (wilo,ebara andmatherplatt etc.)Pump Capacity 180 lpm, at 30 m head (1 working + 1 standby) (Domestic water relift pump). |
| 91 | Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete. |
| 92 | Sand for an average lead of 32 Kms. |
| 93 | Stone aggregate below 40mm size for an average lead of 10 Kms. |
| 94 | Stone aggregate 40mm and above 40mm size for an average lead of 10 Kms. |
| 95 | Bricks for an average lead of 210 Kms |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
